You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ipq40xx/patches-4.14
Steven Lin 2b4ac79a79 ipq40xx: add support for EnGenius EAP1300
SOC:    IPQ4018 / QCA Dakota
CPU:    Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7
DRAM:   256 MiB
NOR:    32 MiB
ETH:    Qualcomm Atheros QCA8072
WLAN1:  Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2
WLAN2:  Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2
INPUT:  RESET Button
LEDS:   Power, LAN, MESH, WLAN 2.4GHz, WLAN 5GHz

1. Load Ramdisk via U-Boot

To set up the flash memory environment, do the following:
a. As a preliminary step, ensure that the board console port is connected to the PC using these RS232 parameters:
   * 115200bps
   * 8N1
b. Confirm that the PC is connected to the board using one of the Ethernet ports. Set a static ip 192.168.99.8 for Ethernet that connects to board. The PC must have a TFTP server launched and listening on the interface to which the board is connected. At this stage power up the board and, after a few seconds, press 4 and then any key during the countdown.

U-BOOT> set serverip 192.168.99.8 && set ipaddr 192.168.99.9 && tftpboot 0x84000000 openwrt.itb && bootm

2. Load image via GUI

a. Upgrade EAP1300 to FW v3.5.3.2
In the GUI, System Manager > Firmware > Firmware Upgrade, to do upgrade.
b. Transfer to OpenWrt from EnGenius.
In Firmware Upgrade page, to upgrade yours openwrt-ipq40xx-engenius_eap1300-squashfs-sysupgrade.bin.

3. Revert to EnGenius EAP1300
To flash openwrt-ipq40xx-engenius_eap1300-squashfs-factory.bin by using sysupgrade command and "DO NOT" keep configuration.
$ sysupgrade –n openwrt-ipq40xx-engenius_eap1300-squashfs-factory.bin

Signed-off-by: Steven Lin <steven.lin@senao.com>
6 years ago
..
030-mtd-nand-Use-standard-large-page-OOB-layout-when-usi.patch Kernel: bump 4.14 to 4.14.29 6 years ago
031-mtd-nand-use-usual-return-values-for-the-erase-hook.patch Kernel: bump 4.14 to 4.14.29 6 years ago
040-dmaengine-qcom-bam-Process-multiple-pending-descript.patch kernel: bump 4.14 to 4.14.48 6 years ago
050-0002-mtd-nand-qcom-add-command-elements-in-BAM-transactio.patch ipq40xx: add target 6 years ago
050-0003-mtd-nand-qcom-support-for-command-descriptor-formati.patch kernel: bump kernel 4.14 to version 4.14.63 6 years ago
050-0004-mtd-nand-provide-several-helpers-to-do-common-NAND-o.patch Kernel: bump 4.14 to 4.14.29 6 years ago
050-0005-mtd-nand-force-drivers-to-explicitly-send-READ-PROG-.patch ipq40xx: add target 6 years ago
070-qcom-spm-fix-probe-order.patch kernel: bump 4.14 to 4.14.59 6 years ago
071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch ipq40xx: fix booting secondary CPU cores 6 years ago
072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch ipq40xx: fix booting secondary CPU cores 6 years ago
073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch kernel: bump 4.14 to 4.14.59 6 years ago
074-ARM-qcom-Add-IPQ4019-SoC-support.patch kernel: bump 4.14 to 4.14.59 6 years ago
075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch kernel: bump 4.14 to 4.14.59 6 years ago
076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch kernel: bump 4.14 to 4.14.59 6 years ago
077-qcom-ipq4019-add-USB-devicetree-nodes.patch kernel: bump 4.14 to 4.14.59 6 years ago
078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch kernel: bump 4.14 to 4.14.59 6 years ago
079-ARM-dts-ipq4019-fix-PCI-range.patch kernel: bump 4.14 to 4.14.59 6 years ago
080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch kernel: bump 4.14 to 4.14.72 6 years ago
081-clk-fix-apss-cpu-overclocking.patch kernel: bump 4.14 to 4.14.59 6 years ago
082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch kernel: bump 4.14 to 4.14.59 6 years ago
083-mtd-nand-add-Winbond-manufacturer-and-chip.patch ipq40xx: use patches that were sent upstream 6 years ago
303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch kernel: bump 4.14 to 4.14.79 6 years ago
700-net-add-qualcomm-mdio-and-phy.patch ipq40xx: add target 6 years ago
701-dts-ipq4019-add-mdio-node.patch kernel: bump 4.14 to 4.14.59 6 years ago
702-dts-ipq4019-add-PHY-switch-nodes.patch kernel: bump 4.14 to 4.14.59 6 years ago
703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch ipq40xx: move essedma patches into same range 6 years ago
710-net-add-qualcomm-essedma-ethernet-driver.patch ipq40xx: add target 6 years ago
711-dts-ipq4019-add-ethernet-essedma-node.patch kernel: bump 4.14 to 4.14.59 6 years ago
712-mr33-essedma.patch ipq40xx: add Cisco Meraki MR33 Support 6 years ago
713-essedma-alloc-skb-ip-align.patch ipq40xx: move essedma patches into same range 6 years ago
850-soc-add-qualcomm-syscon.patch ipq40xx: add target 6 years ago
900-dts-ipq4019-ap-dk01.1.patch kernel: bump 4.14 to 4.14.59 6 years ago
901-arm-boot-add-dts-files.patch ipq40xx: add support for EnGenius EAP1300 6 years ago
997-device_tree_cmdline.patch kernel: bump 4.14 to 4.14.51 6 years ago