296212c301
kirkwood: add missing board_config_flush(), remove dead code
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47745
9 years ago
80a3e65a9d
kirkwood, ipq806x: fix board.d script permissions
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47735
9 years ago
7514b6d73b
kirkwood: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47733
9 years ago
84c7a31535
kirkwood: nsa310s: fix partition size
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 47504
9 years ago
4e239d9fdb
kirkwood: add Linksys routers to default profile
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47458
9 years ago
ba26e9f60f
kirkwood: rename EA3500/EA4500 profiles
...
Match the engineering board names now used elsewhere.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47436
9 years ago
31c7de0313
kirkwood: add diag LED on Linksys EA3500
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47435
9 years ago
b0e7ca4f8f
kirkwood: support sysupgrade on Linksys EA[34]500
...
This automatically writes to the alternate firmware partition
(on Linksys's dual firmware layout) using code borrowed from
the WRT1900AC port.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47434
9 years ago
ea8ac0999c
kirkwood: support Linksys boot counter on EA[34]500
...
This is done with existing code from the WRT1900AC port.
It makes sure the "auto_recovery" bootloader option is set,
and resets the s_env boot counter after a successful boot.
This gives users without a serial console connection some
measure of safety.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47433
9 years ago
6acb552eee
kirkwood: generate factory images for Linksys EA[34]500
...
This is done with the new image generation system and board names.
It also generates a sysupgrade.tar image.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47432
9 years ago
5d4bbb5f5b
kirkwood: find active Linksys root partition
...
This is imported verbatim from the mvebu WRT1900AC port.
It picks up the current boot partition from the kernel command line,
then renames that partition "ubi" so that it auto-mounts.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47431
9 years ago
ad8f6370de
kirkwood: consistently use engineering board names
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47430
9 years ago
3ef14d0c3d
kirkwood: rework Linksys EA[34]500 DTS
...
- Use board engineering names rather than marketing names
- Linksys uses a dual firmware layout, where the bootloader
will switch to the other stored image when one fails to
boot three consecutive times.
In order to make this firmware compatible with the factory
images and the stock bootloader we must match this layout.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47429
9 years ago
49db4924d7
kirkwood: enable squashfs-on-ubiblock support
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47428
9 years ago
47668ffd8e
kirkwood: add support for 4.3
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 47386
9 years ago
805492bda9
kirkwood: pogo_e02: use mainline led definitions
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 47385
9 years ago
55a912f43e
kernel: update kernel 3.18 to version 3.18.23
...
Changelog:
* https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.22
* https://cdn.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.23
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47334
9 years ago
6a18146206
kirkwood: add initial support for NSA310s
...
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 47330
9 years ago
2e7df6312d
kirkwood: image: Remove custom mkfs targz override as base should be fine now
...
It was wrong anyway, missing file sort order parameter which was fixed
in base month ago.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 47313
9 years ago
8a237d1f03
kirkwood: image: Refactor sanitize_profile_name using PROFILE_SANITIZED var
...
Signed-off-by: Petr Štetiar <ynezz@true.cz>
SVN-Revision: 47309
9 years ago
c853db24e0
kirkwood: add wpad-mini to router profiles
...
Without it the wifi isn't really usable.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46565
9 years ago
dbe4173b20
image: fix jffs2(_nand) image generation
...
Variables dependend on JFFS2_BLOCKSIZE and NANDBLOCK_SIZE are used
for template generation, so need to be present before inclusion of
image.mk in target image Makefiles.
So move all declarations to before any includes.
Fixes: r42878 ("image.mk: clean up and parallelize mkfs calls")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46564
9 years ago
564fdae968
kirkwood: disable TSO on the ethernet device by default, fixes data corruption issues ( #19735 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45776
9 years ago
9f0ffef86a
kirkwood: disable the bogus CONFIG_IP_ADVANCED_ROUTER override ( #19722 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45753
9 years ago
7437be53ba
kirkwood: add support for the Seagate GoflexHome
...
Add Support for the Seagate GoflexHome <http://wiki.openwrt.org/toh/seagate/goflexhome >
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 45647
9 years ago
954004eccc
kernel: disable INET_LRO by default
...
INET_LRO deprecated and there are exactly two drivers using it, neither
being included in any of the targets enabling INET_LRO. At the same time
both drivers needing it select it.
So just disable it for everyone.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45584
9 years ago
cc8628a6a3
kirkwood: put uboot-envtools in DEFAULT_PACKAGES
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45477
9 years ago
6d0ad03fac
kernel: remove references to kmod-of-i2c
...
these break the IB since the module is part of i2c-core now
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45363
9 years ago
cacc152a37
kirkwood: add missing symbol that broke full builds
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44641
9 years ago
d15ac306fa
kernel: move KERNFS to generic config
...
KERNFS symbol is selected by SYSFS, so place it in generic config.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44615
9 years ago
f04a268a04
kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
...
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44614
9 years ago
fa097e5ae5
kernel: disbale HAMRADIO in generic config
...
HAMRADIO enabled in all generic configs, but no one platform directly
use related drivers/protocols. This symbol is only used for kmod-ax25
package modules. Furthermore, half of platforms explicitly disables
this symbol, what silently disables build of modules for kmod-ax25
package.
So disable HAMRADIO by-default in generic config, add it to kmod-ax25
package and remove it from platform specific configs.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44613
9 years ago
6617845711
kernel: move MTD_SPLIT_SUPPORT to generic config
...
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
SVN-Revision: 44612
9 years ago
f40e7946ce
kirkwood: drop support for 3.14
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44610
9 years ago
37cef98844
kirkwood: switch to 3.18
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44609
9 years ago
5cce8f9a0f
kirkwood: Seagate GoFlex Net
...
Add GoFlex Net "Board Name" , set and cleanup network default and LEDs.
Remove kmod-rtc-marvell from default packages, as the GoFlex net does not have a RTC.
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 44422
9 years ago
7294b892dc
kirkwood: refresh kernel config
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44319
9 years ago
81db848656
targets: base-files: diag.sh does not need to be executable
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44305
9 years ago
a46bb6ec6a
kirkwood: add wpad-mini to guruplug profile
...
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 44125
9 years ago
c8e9b5d13e
kirkwood: enable swconfig by default on EA3500
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 44124
9 years ago
2907ad2363
kirkwood: fix EA3500 ubi options
...
Previous options resulted in a nonfunctional image.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 44123
9 years ago
86f1a60549
kirkwood: drop port-based VLAN setup
...
Using port-based VLANs depends on a non-standard
swconfig parameter, which compilcates things like
LuCI that don't know about it. This patch changes
the default to use 802.1q VLANs internally in the
switch, but without tagging packets since we have
two Ethernet ports.
iperf3 tests indicate no difference in performance
versus port-based VLANs when the CPU port is not
using tags.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 44122
9 years ago
34f6c6fc38
kirkwood: enable switch on Linksys EA3500
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 44036
10 years ago
8698398a6e
target: kirkwood: fix leds defaults config
...
Fix missing parameters in 01_leds
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 44007
10 years ago
a1872182bb
mvsw6171: rename to 'mvsw61xx'
...
In preparation for properly supporting switches
beyond the 88E6171.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43935
10 years ago
5744500ab6
we've changed places with Luka, reflect that :)
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43774
10 years ago
873202fc0b
kirkwood: add *plugs to uci-defaults
...
Set defaults health led to a timer heartbeet (200/800)
and populate network for:
- GuruplugServerPlus
- SheevaPlug
- SheevaPlug with eSATA
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43752
10 years ago
39743e45f8
kikwood: populate kirkwood.sh with new boards
...
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43751
10 years ago
ec9a0f898a
kirkwood: set default EA4500 switch config
...
This maps the LAN ports to eth0 and WAN port to eth1.
Since there are two interfaces the 802.1q VLAN mode
is unnecessary and left disabled. Port-based VLANs
are used instead.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43750
10 years ago
309e74b86d
kirkwood: add sheevaplug and derivatives
...
Add kirkwood FDT:
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
- Topkick1281P2
Signed-off-by: Gérald Kerma <drEagle@doukki.net>
SVN-Revision: 43735
10 years ago
019ea725aa
add "preinit_regular" diag.sh set_state argument
...
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43715
10 years ago
2db6da5532
kirkwood: enable EA4500 switch on 3.18
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43704
10 years ago
d7b4bf8966
kirkwood: Iomega ix2-200: wire up the GPIO poweroff driver in the DTS file
...
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43670
10 years ago
a2a6077fd0
kirkwood: sort 110-nas profile
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43642
10 years ago
9a74026206
kirkwood: add 3.18 support
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43613
10 years ago
3b17625394
kirkwood: Iomega ix2-200: use all remaining MTD space for rootfs
...
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43590
10 years ago
7a65768ddc
kirkwood: add a diag script
...
Currently only Linksys EA4500 is supported.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 43543
10 years ago
b5675ad92a
kirkwood: enable mvsw6171 switch driver on EA4500
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 43487
10 years ago
7974f29558
kirkwood: change CRC32 implementation to CRC32_SLICEBY8
...
At least on my Iomega ix2-200 system, this makes btrfs writes about 30% faster.
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43434
10 years ago
5c4f9198bb
kirkwood: refresh kernel config
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 43432
10 years ago
8dfb87bebc
kirkwood: Add support for Iomega StorCenter ix2-200
...
Signed-off-by: Richard Kunze <richard.kunze@web.de>
SVN-Revision: 43391
10 years ago
4f1a9470f0
kirkwood: add support for Linksys EA3500
...
http://wiki.openwrt.org/toh/linksys/ea3500
Signed-off-by: Dan Walters <dan@walters.io>
SVN-Revision: 43230
10 years ago
c288d2d6d9
kernel: makefiles: make use of new var KERNEL_PATCHVER
...
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43047
10 years ago
275cef6363
image.mk: clean up and parallelize mkfs calls
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42878
10 years ago
f35da063bc
targets: remove useless quotes around KERNELNAME
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42780
10 years ago
02629d8f87
kernel: update 3.14 to 3.14.18
...
Targets were build tested and patches are refreshed.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42463
10 years ago
a5a309142c
kirkwood: fix typos on DEBUG_LL_UART_*
...
We were prompted for which DEBUG_LL_UART implementation we want, fix the
typos such that the build continues.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42332
10 years ago
0d165a244d
kirkwood: refresh kernel config
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42314
10 years ago
7116b091eb
kirkwood: drop 3.10 support
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42077
10 years ago
f767d83b67
kirkwood: switch to 3.14
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42076
10 years ago
7d8f187201
target/linux/*/image/Makefile: use new dts path variable
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41791
10 years ago
ba63338d3f
kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
...
SVN-Revision: 41776
10 years ago
d0ad8c00b6
kernel: sort Kconfig options in kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 41614
10 years ago
994e5ce2f9
kernel: update 3.10.36->3.10.44
...
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41351
10 years ago
a54f4320f9
kirkwood: move kirkwood.sh to /lib/ for consistency
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41338
10 years ago
8416523dba
kirkwood: base-files: use /lib/functions/kirkwood.sh
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41336
10 years ago
e6aea925d3
kirkwood: base-files: add script to detect board name and populate /tmp/sysinfo
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41335
10 years ago
70a27a518e
kernel: update 3.14 to 3.14.8
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41309
10 years ago
e9f664c879
kernel: make sure the new UBIBLOCK symbol does not break builds
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41134
10 years ago
ac5d5cbc79
kernel: add a NAND_SUPPORT symbol
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41122
10 years ago
dfabb76883
kirkwood: cosmetic: move POGOE02 profile to different file
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 40873
10 years ago
4122af10f9
kirkwood: add support for Linksys EA4500
...
Support is added only for kernel 3.14 - do not show it until
the switch is made.
Following uboot env changes are needed to make it work on stock uboot:
10 years ago
3bb20dedcd
kirkwood: add Pogoplug E02 kernel support for 3.14
...
This also fixes a typo in the UBIFS_OPTS
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 40827
10 years ago
55131c5f42
kirkwood: add support for 3.14
...
* support for pogoplug_e02 is missing
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 40808
10 years ago
d2812cb036
kernel: update 3.10 to 3.10.36
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40467
10 years ago
627baa28d3
kernel: update 3.10 to 3.10.34
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40291
10 years ago
f677b1bc7e
kernel: update 3.10 to 3.10.32
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39707
10 years ago
30c39f99a7
kirkwood: dockstar: remove sata from packages
...
The dockstar doesn't have any sata ports.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 39596
10 years ago
9ba7cbafe4
kirkwood: add support for Seagate GoFlexNet
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 39595
10 years ago
58fa3f8fdf
kirkwood: update support for dockstar
...
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:
nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-dockstar-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset
Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Alexander Couzens <lynxis@fe80.eu>
CC: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39593
10 years ago
0b0357b50e
kirkwood: update support for ib62x0
...
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:
nand erase 0x200000 0xfe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-ib62x0-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset
Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39592
10 years ago
0c25f159fd
kirkwood: update support for iconnect
...
Previous patch was pushed due to false user report. While at it fix alphabetic
ordering.
The board is optimized for ubi(fs) and boots OpenWrt without changes to uboot
environment if OpenWrt's uboot package is used. In order to flash the image run
following commands in uboot shell:
nand erase 0x200000 0x1fe00000
ubi part root ; ubi remove rootfs ; ubi create rootfs
tftpboot 0x800000 openwrt-kirkwood-iconnect-rootfs.ubifs ; ubi write 0x800000 rootfs ${filesize} ; reset
Signed-off-by: Luka Perkov <luka@openwrt.org>
CC: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39591
10 years ago
a2543d72d8
kernel: update 3.10 to 3.10.28
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39399
10 years ago
0e2586a774
kernel: update 3.10 to 3.10.26
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39220
11 years ago
952db22551
kernel: update kernel 3.10 to 3.10.24
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39059
11 years ago
f1ef0b92be
kernel: update 3.10 to 3.10.21
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38972
11 years ago
6cbad59ead
kirkwood: include ext4 support by default
...
Several users reported that they would like this feature.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38901
11 years ago
a48520f0f3
kirkwood: kernel: add missing config option
...
Buildbot found missing config option for target kirkwood.
Signed-off-by: Jiri Slachta <slachta@cesnet.cz>
SVN-Revision: 38900
11 years ago
770a285ee3
kirkwood: drop unnecessary argument from *_UBIFS_OPTS variables
...
The '-U' aka '--squash-uids' is already used in Image/mkfs/ubifs function.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38898
11 years ago
746ace4baf
kirkwood: add support for iomega iconnect
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Engberg <daniel.engberg@pyret.net>
SVN-Revision: 38897
11 years ago
6d4132b7a4
kirkwood: add missing kernel config CONFIG_REGMAP=y
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 38837
11 years ago
b294319215
kirkwood: add support for dockstar
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38664
11 years ago
35656042f1
kernel: update 3.10 to 3.10.18
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38652
11 years ago
e00bc81a56
kirkwood: add userland support for Pogoplug E02
...
This patch adds the userland support for the Pogoplug E02 by Cloud
Engines, Inc.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 38631
11 years ago
2b0fa00da8
kirkwood: add Pogoplug E02 Kernel support
...
This patch adds a DTS file for the Pogoplug E02 by Cloud Engines, Inc.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 38630
11 years ago
6f26ef8b5d
kirkwood: extend image/Makefile
...
* use lower case letters in generated images
* extend support for boot/ directory
* fix some typos
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 38629
11 years ago
7938d16451
build: make MkuImage more generic
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38516
11 years ago
b6b06000eb
kernel: update 3.10 to 3.10.17
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38506
11 years ago
ad7564142d
kirkwood: drop 3.3.x kernel version
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38404
11 years ago
73246d2f64
kirkwood: upgrade to 3.10.15
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38402
11 years ago
8c2f571ddd
kirkwood: enable appended dtb (3.10.x)
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38379
11 years ago
c808a4a7ef
ubifs: enable building modular images
...
Now it is possible to build ubi/ubifs images for only selected boards inside
single target.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38375
11 years ago
fa3ab0c237
kirkwood: add support for UBI (3.10.x)
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38301
11 years ago
5617993e10
kirkwood: enable dts compilation
...
In 3.10 we might build those, so for now just add this functionality.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38297
11 years ago
a30df8987d
kirkwood: fix initramfs images
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38296
11 years ago
38936426f7
kirkwood: update patches and configuration (3.10)
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38295
11 years ago
0eb732c659
kirkwood: drop PROFILE from image names
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38281
11 years ago
0331657a4f
kirkwood: add linux 3.10 support
...
Backport appropriate patches to allow using device tree only board
defintions.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38280
11 years ago
7d1e5ae918
kirkwood: prepare for 3.10
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38279
11 years ago
914ca3cb55
kirkwood: explicitly set CPU_TYPE to xscale
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38278
11 years ago
6a4f2922f6
targets: prepare for supporting normal and initramfs images
...
In order to support both normal images and initramfs, ensure that each
target sets KERNELNAME properly so that the generic kernel building code
can copy the corresponding files over $(KDIR) with the appropriate
extension. Update the various paths to the kernel and wrapper images
from $(LINUX_DIR)/arch/$(ARCH)/boot/$(foo) to $(KDIR)/$(foo).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 37049
11 years ago
d3a7b5633c
kirkwood: disable the CONFIG_IP_ADVANCED_ROUTER kernel config override ( #13702 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36937
11 years ago
e7b504ce8e
kirkwood: convert to use the new jffs2_nand
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36861
11 years ago
ea94d66b0f
Adapt default network configuration for IPv6
...
SVN-Revision: 36278
11 years ago
3a2cccda2e
all targets: use numerically prefixed uci-defaults file names to better control order of execution
...
SVN-Revision: 35217
12 years ago
1e103b2ecc
target: enable XZ BCJ decompressor code after r35097
...
Required to actually be able to mount squashfs xz compressed
filesystems.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35156
12 years ago
33f6c5ddb9
kernel: add missing USB configuration symbols after r34501
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34568
12 years ago
1f516235ea
remove common symbols from 3.3 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34403
12 years ago
e91dc2e5b3
target: refresh all target configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33987
12 years ago
de3c3d7181
Enable eSATA sheevaplug
...
OpenWRT runs in a eSATA sheevaplug like a charm. This patch just enables
CONFIG_MACH_ESATA_SHEEVAPLUG so the proper MACHINE_START definition
is compiled in.
Signed-off-by: Unai Uribarri <unaiur@gmail.com>
SVN-Revision: 33266
12 years ago
03a6d65c37
kernel: add Marvell SoC built-in RTC to modules
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32732
12 years ago
c89e87d186
kirkwood: add support for seagate goflexnet and goflexhome
...
Signed-off-by: Martin Mueller <mm@sig21.net>
SVN-Revision: 32725
12 years ago
952ce3473d
kirkwood: revert config changes from r32053
...
SVN-Revision: 32719
12 years ago
1c80d9f21d
kirkwood: fix typo in uci-defaults/leds
...
Signed-off-by: Martin Mueller <mm@sig21.net>
SVN-Revision: 32343
12 years ago
be5229f0ba
kirkwood: ib62x0 fix reboot
...
SVN-Revision: 32131
12 years ago
a4d96aae8d
bump to 3.3.8
...
SVN-Revision: 32055
12 years ago
605012ad5d
kirkwood: reorganize target
...
SVN-Revision: 32053
12 years ago
c81c6516de
kirkwood: use the generic uci-default functions for initial LED setup
...
SVN-Revision: 31994
12 years ago
ba3ad24514
kirkwood: use uci-defaults to configure different boards
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 31990
12 years ago
2ae5581447
kernel: update linux 3.3 to 3.3.7
...
SVN-Revision: 31848
12 years ago
39994008cb
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
SVN-Revision: 31737
12 years ago
b472e5d12e
kernel: update linux 3.3 to 3.3.6
...
SVN-Revision: 31709
12 years ago
ec27c35ebe
kirkwood: fix Kconfig symbol for NSA-310
...
SVN-Revision: 31673
12 years ago
200227e0b4
kirkwood: add support for the ZyXEL NSA-310
...
SVN-Revision: 31669
12 years ago
213cbf4297
kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support
...
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 31668
12 years ago
d4876692c1
kirkwood: enable GPIO sysfs interface
...
SVN-Revision: 31667
12 years ago
d1eed108bb
kirkwood: nuke 2.6.37 support
...
SVN-Revision: 31666
12 years ago
861b9b25e0
kirkwood: switch to 3.3
...
SVN-Revision: 31665
12 years ago
b272041998
kirkwood: add 3.3 support
...
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>
SVN-Revision: 31664
12 years ago
be49daffc8
base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
...
SVN-Revision: 28933
13 years ago
d6f02b62d4
add timeserver config to target specific system configs as well
...
SVN-Revision: 28750
13 years ago
50c743e79e
kernel: Update to version 2.6.37.6
...
Thank you Peter Wagner for the patch
SVN-Revision: 26441
13 years ago
b8430e7427
update to 2.6.32.33 and 2.6.37.4
...
SVN-Revision: 26226
13 years ago
c89b70adcd
upgrade to 2.6.37
...
SVN-Revision: 26225
13 years ago
b74308c433
only support EABI on ARM targets
...
SVN-Revision: 25928
13 years ago
f7c0993027
switch back to xscale mtune, marvell_f is unlikely to get upstreamed
...
SVN-Revision: 25707
13 years ago
31709b2c76
update to 2.6.35.11
...
SVN-Revision: 25582
13 years ago
7ab8489f82
config symbol cleanup
...
SVN-Revision: 25272
14 years ago
81edc28358
enable mach support for OpenRD Base and OpenRD Client ( #8417 ), spare the rest
...
SVN-Revision: 24541
14 years ago
ead8ab8403
update to the latest stable kernels
...
SVN-Revision: 24136
14 years ago
4052849677
switch from ext2 to ext4 (w/o) journaling
...
SVN-Revision: 24084
14 years ago
0a5da348d1
update kernels to 2.6.32.25 and 2.6.35.8
...
SVN-Revision: 23851
14 years ago
4990417071
Fix patch
...
SVN-Revision: 23702
14 years ago
41ddcd79ab
Adds leds and gpio keys support for Iomega iConnect.
...
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 23682
14 years ago
81059a2a96
mark targets maintained by me
...
SVN-Revision: 23668
14 years ago
290e192ce8
Make mv_cesa crypto module available on Orion as well.
...
SVN-Revision: 23229
14 years ago
f05a30206c
Iomega iConnect Wireless platform support
...
This patch adds support for Iomega iConnect Wireless. Leds and wireless card
support are still missing.
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 23217
14 years ago
1162dfde82
Remove hwmon and i2c support from being built-in
...
SVN-Revision: 23214
14 years ago
83d6a36019
update 2.6.35.x to 2.6.35.7
...
SVN-Revision: 23213
14 years ago
ff9ddd7c0f
Add jffs2 feature flag
...
SVN-Revision: 23177
14 years ago
8314ce02cc
Fix mv_cesa module dependencies and .ko file location Thanks KanjiMonster & Memphiz
...
SVN-Revision: 23145
14 years ago
1cd4b50164
fix Dockstart default rdate interface in system config, reformat
...
SVN-Revision: 22975
14 years ago
a70e0d0665
Add kernel package for the mv_cesa crypto module
...
SVN-Revision: 22877
14 years ago
3fe1d8503c
Set -mtune to marvell-f
...
SVN-Revision: 22876
14 years ago
34736c48b9
Build usb storage support into the kernel.
...
This allows for example to put the rootfs on a usb-stick.
SVN-Revision: 22845
14 years ago
dc116b1887
Add different profiles for Sheevaplug and Dockstar
...
Thanks to Gerrit Visser
SVN-Revision: 22838
14 years ago
429c8a56b6
Use kirkwood_nand_init instead of manually registering the nand driver
...
This fixes that the device would hang during boot.
SVN-Revision: 22837
14 years ago
014765e77c
Align jffs2 to pagesize and fix mkfs2.jffs2 opts
...
SVN-Revision: 22836
14 years ago
cf445bb48f
Update 2.6.35.x to 2.6.35.4
...
SVN-Revision: 22833
14 years ago
28d7de48b8
Cleanup image generation
...
SVN-Revision: 22829
14 years ago
6e3060af50
Update kernel to 2.6.35
...
SVN-Revision: 22786
14 years ago
0e974c50ed
Add Seagate Dockstar support
...
SVN-Revision: 22765
14 years ago
b3b591c000
buildsystem: rename tgz/TGZ "feature" and matching options to targz/TARGZ
...
SVN-Revision: 21238
14 years ago
9ae19dcf87
target: remove CONFIG_CRC16 override ( closes : #7194 )
...
SVN-Revision: 21130
14 years ago
e2b57ecf5f
define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
...
SVN-Revision: 20834
14 years ago
e1863691d9
do *not* enable CONFIG_PCI in generic config, but on targets where it makes sense instead (partially revert [18370])
...
SVN-Revision: 20136
14 years ago
a47b8566a1
update to 2.6.30, refresh patches
...
SVN-Revision: 18635
15 years ago
6b280112f2
some more Kconfig symbol move..
...
SVN-Revision: 18371
15 years ago
1d62d9a95c
another round of kernel config cleanups
...
SVN-Revision: 18370
15 years ago
d4b251bdb8
update to 2.6.30.9
...
SVN-Revision: 18126
15 years ago
fcc67b55b1
move common CONFIG_MMC entries to generic
...
SVN-Revision: 17948
15 years ago
054c54512f
kernel: upgrade to 2.6.30.8 and refresh patches
...
SVN-Revision: 17804
15 years ago
85fcc97a13
update to latest 2.6.27 and 2.6.30 kernels
...
SVN-Revision: 17602
15 years ago
3ce53b8d92
update to 2.6.30.6, compile tested on some targets only
...
SVN-Revision: 17549
15 years ago
0c5a73ec9b
use 2.6.30.5
...
SVN-Revision: 17296
15 years ago
ab5bc14973
update to 2.6.30.4
...
SVN-Revision: 17062
15 years ago
b2c26c32dd
switch to 2.6.30.3
...
SVN-Revision: 17028
15 years ago
c3aa860a11
update to 2.6.30.2
...
SVN-Revision: 16931
15 years ago
f74d16548d
update targets to 2.6.30.1, update patches
...
SVN-Revision: 16697
15 years ago
8cd16ebd28
Bump 2.6.30 kernel version to final
...
SVN-Revision: 16419
15 years ago
Jo-Philipp Wich
Luka Perkov
Hauke Mehrtens
Felix Fietkau
Jonas Gorski
John Crispin
Imre Kaloz
Florian Fainelli
Gabor Juhos
Steven Barth
Lars-Peter Clausen
Nicolas Thill
Hamish Guthrie