kirkwood: enable switch on Linksys EA3500

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 44036

target/linux/kirkwood/base-files/etc/uci-defaults/02_network

@@ -55,6 +55,9 @@ case "$board" in
 	;;
 "ea3500")
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	ucidef_add_switch "switch0" "1" "0"
+	add_port_based_vlan "switch0" "1" "0 1 2 3 5"
+	add_port_based_vlan "switch0" "2" "4 6"
 	;;
 "ea4500")
 	ucidef_set_interfaces_lan_wan "eth0" "eth1"

target/linux/kirkwood/patches-3.14/170-ea3500.patch

@@ -10,7 +10,7 @@
  	kirkwood-guruplug-server-plus.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-ea3500.dts
-@@ -0,0 +1,149 @@
+@@ -0,0 +1,160 @@
 +/*
 + * kirkwood-ea3500.dts - Device Tree file for Linksys EA3500
 + *
@@ -112,6 +112,17 @@
 +			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 +		};
 +	};
++
++	mvsw61xx {
++		compatible = "marvell,88e6171";
++		status = "okay";
++		reg = <0x10>;
++
++		mii-bus = <&mdio>;
++		cpu-port-0 = <5>;
++		cpu-port-1 = <6>;
++		is-indirect;
++	};
 +};
 +
 +&nand {

target/linux/kirkwood/patches-3.18/170-ea3500.patch

@@ -10,7 +10,7 @@
  	kirkwood-guruplug-server-plus.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-ea3500.dts
-@@ -0,0 +1,149 @@
+@@ -0,0 +1,160 @@
 +/*
 + * kirkwood-ea3500.dts - Device Tree file for Linksys EA3500
 + *
@@ -112,6 +112,17 @@
 +			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 +		};
 +	};
++
++	mvsw61xx {
++		compatible = "marvell,88e6171";
++		status = "okay";
++		reg = <0x10>;
++
++		mii-bus = <&mdio>;
++		cpu-port-0 = <5>;
++		cpu-port-1 = <6>;
++		is-indirect;
++	};
 +};
 +
 +&nand {