dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
v19.07.3_mercusys_ac12_duma
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '76c1c1daea'
${ noResults }
openwrt/target/linux/ar71xx/base-files/etc/board.d/02_network

712 lines
14 KiB
Plaintext
Raw Normal View History Unescape Escape

ar71xx: create generic network config from an uci-defaults script SVN-Revision: 28817
13 years ago
#!/bin/sh
#
ar71xx: switch network and led defaults to board detection framework Also translate ucidef_add_switch_vlan() to ucidef_add_switch_ports() for better switch topology mapping and improved default config generation. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47663
9 years ago
# Copyright (C) 2011-2015 OpenWrt.org
ar71xx: create generic network config from an uci-defaults script SVN-Revision: 28817
13 years ago
#
ar71xx: board.d: add missing include (#21296) Include /lib/functions/system.sh in 02_network to define missing mtd_get_mac_binary() procedure. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47723
9 years ago
. /lib/functions/system.sh
all: drop old uci-defaults.sh Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47867
9 years ago
. /lib/functions/uci-defaults.sh
ar71xx: migrate led and network setup to board detection framework Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47534
9 years ago
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ar71xx_setup_interfaces()
{
local board="$1"
ar71xx: switch network and led defaults to board detection framework Also translate ucidef_add_switch_vlan() to ucidef_add_switch_ports() for better switch topology mapping and improved default config generation. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47663
9 years ago
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
case "$board" in
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
airgatewaypro)
ucidef_add_switch "switch0" \
"0@eth0" "4:lan" "5:wan"
;;
airrouter|\
ap121|\
ap121-mini|\
ap96|\
dir-600-a1|\
dir-615-c1|\
dir-615-e1|\
dir-615-e4|\
hiwifi-hc6361|\
ja76pf|\
mc-mac1200r|\
minibox-v1|\
mynet-n600|\
ar71xx: rework GainStrong devices support - combine support for Oolite/MiniBox V1.0 in single mach-*.c file - fix model/board names - include correct/full vendor name - drop redundant package and factory image Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
6 years ago
oolite-v1|\
ar71xx: add support for GainStrong Oolite V5.2 GainStrong Oolite V5.2 is a small (39.5 x 78 mm), dual-band system on module, based on Qualcomm QCA9531 + QCA9887. All QCA9531 SOC GPIOs are available on castellated pins. Specification: - 650/400/200 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet (all ports available on castellated pins) - 2T2R 2.4 GHz (QCA9531), with ext. PA and LNA - 1T1R 5 GHz (QCA9887) with ext. FEM (SKY85710-11) - 3x U.FL - 1x USB 2.0 The dedicated development board includes 5 FE ports, USB 2.0 port, two buttons (one directly connected to SOC reset input), header with all GPIOs and several LEDs. Flash instruction: Vendor firmware is based on OpenWrt. LuCI or sysupgrade can be used to flash OpenWrt firmware. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
6 years ago
oolite-v5.2|\
oolite-v5.2-dev|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
qihoo-c301|\
ar71xx: add support for P&W R602N and CPE505N P&W (full name: Shenzhen Progress&Win Technologies) R602N (could be also labeled as R602F, R602, etc.) is a simple N300 router with 5-port 10/100 Mbps switch, non-detachable antennas and USB. CPE505 is an outdoor CPE with PoE support and detachable antennas. Both devices are based on Qualcomm/Atheros QCA9531 v2. Common specification: - 650/597/216 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 16 MB of FLASH - UART (J2) header on PCB R602N specification: - 5x 10/100 Mbps Ethernet - 1x USB 2.0 - 2T2R 2.4 GHz with external LNA and PA (SE2576L), up to 28 dBm - 2x external, non-detachable antennas - 7x LED, 1x button CPE505N specification: - 2x 10/100 Mbps Ethernet (both ports support passive PoE 12-24 V) - 2T2R 2.4 GHz with external LNA and PA (SKY65174-21), up to 30 dBm - 2x external, detachable antennas (RP-SMA connectors) - 1x RGB LED, 2x LEDs (in RJ45 sockets), 1x button Flash instructions: It seems that there are many different versions of the firmware which these devices are shipped with. The generic/standard one is based on some modified OpenWrt and LEDE firmware can be flashed directly from vendor's webgui or with sysupgrade (root password is "admin123"). Before flashing, make sure (use "fw_printenv") that the kernel load address in your device is set to "0x9f050000" (bootcmd variable is "bootm 0x9f050000"). If your device uses different load address, you should first change it, under vendor's firmware, with command: fw_setenv bootcmd "bootm 0x9f050000 || bootm OLD_ADDRESS" Where OLD_ADDRESS is previous kernel load address (in CPE505 version I got access to, it was "0x9fe80000"). This will allow you to use both the vendor's and LEDE firmware. If version of your device contains empty U-Boot environment (you will get information about this after issuing "fw_printenv"), you should use U-Boot, serial line access and TFTP to perform firmware upgrade: 1. tftp 0x80060000 lede-ar71xx-generic-...-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000 || bootm OLD_ADDRESS" 5. saveenv && reset These devices contain also web recovery mode inside U-Boot. It can be started with pressing the reset button for around 3 seconds just after the device powerup. Web recovery panel is available on "192.168.10.9" and to be able to use it, IP on your PC must be set to "192.168.10.10". Make sure to change kernel load address before using recovery mode or the U-Boot will not be able to load LEDE firmware. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
r602n|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
rb-750|\
rb-751|\
som9331|\
ar71xx: add support for YunCore T830 YunCore T830 is a simple N300 router with 5-port FE switch, detachable antennas and USB 2.0 port. Specification: - 650/597/216 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet - 2T2R 2.4 GHz (QCA9531), with ext. PA (SKY65174-21) and LNA - two external, detachable antennas (RP-SMA) - 1x USB 2.0 - 8x LED (7 driven by GPIO) - 1x button (reset) - DC jack for main power input (12 V) - UART and JTAG headers on PCB Flash instruction: 1. First, gain root access to the device, following below steps: - Login into web gui (default password/IP: admin/192.168.188.253). - Go to "Advanced" -> "Management" -> "System" and download backup of configuration (bakfile.bin). - Open the file as tar.gz archive, edit/update "shadow" file and change hash of root password to something known. - Repack the archive, rename it back to "bakfile.bin" and use to restore configuration of the device. - After that, device will reboot and can be accessed over SSH. 2. Then, install OpenWrt: - Login over SSH and issue command: fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" - Upload "sysupgrade" image and install it (only if previous command succeeded) with command: "sysupgrade -n -F openwrt-...". Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
6 years ago
t830|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
tew-632brp|\
tew-712br|\
tew-732br|\
tl-mr3220|\
tl-mr3420|\
tl-wdr3320-v2|\
tl-wdr3500|\
ar71xx: fix LED defines for TP-Link TL-WR740N v6 Signed-off-by: Andrey Polischuk <androld.b@gmail.com> [changed commit subject, dropped redundant kernel config symbol] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
tl-wr740n-v6|\
ar71xx: add support for TP-LINK TL-WR840N v2 and v3 This patch adds support for the TP-LINK TL-WR840N v2 and v3. - SoC: Qualcomm QCA9533-BL3A (650 MHz) - RAM: 32 MiB (Zentel A3S56D40GTP) - Flash: 4 MiB (v2: Macronix MX 25L323F) (v3: Winbond 25Q32FVSIG) - LAN: 4x 100M - WAN: 1x 100M Signed-off-by: Vaclav Svoboda <svoboda@neng.cz>
7 years ago
tl-wr840n-v2|\
tl-wr840n-v3|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
tl-wr841n-v11|\
tl-wr841n-v9|\
tl-wr842n-v3|\
whr-g301n|\
whr-hp-g300n|\
whr-hp-gn|\
wzr-hp-ag300h|\
zbt-we1526)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
alfa-ap120c|\
all0305|\
antminer-s1|\
antminer-s3|\
antrouter-r1|\
ar71xx: add support for ALFA Network AP121F ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users. Device is based on Atheros AR9331 WiSoC and is running a custom version (updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR1) - 16 MB of FLASH (SPI NOR) - 1x 10/100 Mbps Ethernet - 1T1R 2.4 GHz - 1x microSD (optional, on separate PCB) - 3x LED, 1x button, 1x switch - UART header on PCB Flash instruction (under U-Boot web recovery mode): 1. Configure PC with static IP 192.168.1.2/24. 2. Connect PC with RJ45 port, press the reset button, power up device, wait for first blink of all LEDs (indicates network setup), then keep button for 3 following blinks and release it. 3. Open 192.168.1.1 address in your browser and upload sysupgrade image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
ap121f|\
ar71xx: add support for ALFA Network AP91-5G ALFA Network AP91-5G is a 5 GHz outdoor AP/CPE board, based on Atheros AR7240 + AR9280. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 32 MB of RAM (DDR1) - 8 MB of FLASH (SPI NOR) - 1x 10/100 Mbps Ethernet, with passive PoE support (24 V) - 1T1R 5 GHz (AR9280), with ext. PA (SE5004L) and LNA, up to 27 dBm - 6x LED (5 are driven by GPIO) - 1x button (reset) - external h/w watchdog (EM6324QYSP5B, disabled and not used) - header for optional 802.3at/af PoE module - DC jack for main power input (optional, not installed by default) - UART and LEDs headers on PCB Flash instruction: Use "factory" image in vendor GUI (in case of problems, make sure your board has up to date firmware). Alternatively, TFTP in U-Boot can be used: select option "2. Load system code then write to Flash via TFTP" during early boot and use "sysupgrade" image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
ap91-5g|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
aw-nr580|\
bullet-m|\
ar71xx: Add support for Ubiquity Bullet M (XW) CPU: AR9342 SoC RAM: 64 MB DDR2 Flash: 8 MB NOR SPI Ports: 100 MBit (24V PoE in) WLAN: 2.4/5 GHz UART: 1 UART on PCB marked as J1 with 115200 8N1 config LEDs: Power, Ethernet, 4x RSSI LEDs (orange, red, 2x green) Buttons: Reset UART connection details .---------------------------------. | | [ETH] J1 [ANT] | o VCC o RX o TX o GND | `---------------------------------' Flashing instructions using recovery method over TFTP 1. Unplug the ethernet cable from the router. 2. Using paper clip press and hold the router's reset button. Make sure you can feel it depressed by the paper clip. Do not release the button until step 4. 3. While keeping the reset button pressed in, plug the ethernet cable back into the AP. Keep the reset button depressed until you see the device's LEDs flashing in upgrade mode (alternating LED1/LED3 and LED2/LED4), this may take up to 25 seconds. 4. You may release the reset button, now the device should be in TFTP transfer mode. 5. Set a static IP on your Computer's NIC. A static IP of 192.168.1.25/24 should work. 6. Plug the PoE injector's LAN cable directly to your computer. 7. Start tftp client and issue following commands: tftp> binary tftp> connect 192.168.1.20 tftp> put openwrt-ar71xx-generic-ubnt-bullet-m-xw-squashfs-factory.bin Tested only on Bullet M2HP. Signed-off-by: Petr Štetiar <ynezz@true.cz>
6 years ago
bullet-m-xw|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
c-55|\
ar71xx: cap324: Use standard eth as static lan While the stock firmware and previous ar71xx versions of openwrt used the single ethernet port as a DHCP client, for unmodified openwrt usage it makes more sense to do the standard openwrt thing and make the ethernet port a static lan with known address so that users can find the device on the network more easily. Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
6 years ago
cap324|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
cap4200ag|\
ar71xx: add support for COMFAST CF-E380AC v1 and v2 COMFAST CF-E380AC v1/v2 is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9558+QCA9880+AR8035. There are two versions of this model, with different RAM and U-Boot mtd partition sizes: - v1: 128 MB of RAM, 128 KB U-Boot image size - v2: 256 MB of RAM, 256 KB U-Boot image size Version number is available only inside vendor GUI, hardware and markings are the same. Short specification: - 720/600/200 MHz (CPU/DDR/AHB) - 1x 10/100/1000 Mbps Ethernet, with PoE support - 128 or 256 MB of RAM (DDR2) - 16 MB of FLASH - 3T3R 2.4 GHz, with external PA (SE2576L), up to 28 dBm - 3T3R 5 GHz, with external PA (SE5003L1), up to 30 dBm - 6x internal antennas - 1x RGB LED, 1x button - UART (T11), LEDs/GPIO (J7) and USB (T12) headers on PCB - external watchdog (Pericon Technology PT7A7514) Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
cf-e380ac-v1|\
cf-e380ac-v2|\
ar71xx: Add support for TP-Link CPE210 v2 This PR adds support for a popular low-cost 2.4GHz N based AP Specifications: - SoC: Qualcomm Atheros QCA9533 (650MHz) - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 2.4GHz N based built into SoC 2x2 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Notes: TP-Link does not use bootstrap registers so without this patch reference clock detects as 40MHz while it is actually 25MHz. This is due to messed up bootstrap resistor configuration on the PCB. Provided GPL code just forces 25MHz reference clock. That causes booting with completely wrong clocks, for example, CPU tries to boot at 1040MHz while the stock is 650MHz. So this PR depends on PR #672 to remove 40MHz reference clock. Thanks to Sven Eckelmann <sven@narfation.org> for properly patching that. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
6 years ago
cpe210-v2|\
ar71xx: Add support for TP-Link CPE210 v3 Looks identical to the v2. This PR adds support for a popular low-cost 2.4GHz N based AP Specifications: - SoC: Qualcomm Atheros QCA9533 (650MHz) - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 2.4GHz N based built into SoC 2x2 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Robert Marko <robimarko@gmail.com> [Rebased, adjusted for separate tplink-safeloader entry, dynamic partitioning] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
6 years ago
cpe210-v3|\
ar71xx: improve support for TP-Link CPE510 v2 This fixes commit bae927c551fd ("ar71xx: add support for TP-LINK CPE510 V2.0") where the support for this device wasn't optimal. Device support for the CPE510v2 so far has been a hack to enable flashing with CPE510v1 images. Those even have different hardware (e.g. additional ethernet port). With this patch, we provide proper support for this device in ar71xx. Installation: - Flash factory image through stock firmware WEB UI or through TFTP - To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. - Rename factory image to recovery.bin - Stock TFTP server IP: 192.168.0.100 - Stock device TFTP address: 192.168.0.254 Fixes: bae927c551fd ("ar71xx: add support for TP-LINK CPE510 V2.0") Signed-off-by: Andrew Cameron <apcameron@softhome.net> [Rebased onto revert commit, changed comments in mach-cpe510.c, changed commit title and description, fixed eth0 MAC address, removed eth1 initialization] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [squashed revert, added fixes tag] Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit c79b796280fa5cd64bac663f9d5e5d9a737c30d6) [added CPE510V2 entry to tplink-safeloader.c] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years ago
cpe510-v2|\
ar71xx: add support for Wallys DR342 Wallys DR342 is a 5 GHz, 2T2R AP/CPE board based on Atheros AR9342. Short specification: - 560/450/225 MHz (CPU/DDR/AHB) - 1x Gbps Ethernet (AR8035) with passive PoE support (24-56 V) - 64 MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 5 GHz with external FEM (SKY85728-11), up to 30 dBm - 2x MMCX connectors - miniPCIe connector with PCIe and USB 2.0 buses - optional miniSIM slot - 7x LED, 1x button - UART, (E)JTAG and LED headers - 1x DC jack for main power (12-56 V) Flash instruction (do it under U-Boot, using UART): 1. tftp 0x82000000 lede-ar71xx-generic-dr342-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
dr342|\
ar71xx: Add support to TP-Link EAP120 Signed-off-by: Henryk Heisig <hyniu@o2.pl>
8 years ago
eap120|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
eap300v2|\
eap7660d|\
el-mini|\
ar71xx: add AVM FRITZ!WLAN Repeater 300E support Specifications: * SoC: AR7242 (Virian 400MHz) * RAM: 64 MB DDR (W9751G6JB-25) * Flash: 16MB SPI flash (S25FL129PIF) * WiFi: AR9382 (2.4/5GHz) + 2x SE2595L * LAN: 1x1000M (PEF7071V) To install LEDE via EVA bootloader, a FTP connection need to be established to 192.168.178.1 within the first seconds after power on: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put lede-ar71xx-generic-fritz300e-squashfs-sysupgrade.bin mtd1 Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years ago
fritz300e|\
ar71xx: add support for Fritz!WLAN Repeater 450E This commit adds support for the AVM Fritz!WLAN Repeater 450E SOC: Qualcomm QCA9556 (Scorpion) 560MHz MIPS74Kc RAM: 64MB Zentel A3R12E40CBF DDR2 FLASH: 16MiB Winbond W25Q128 SPI NOR WLAN1: QCA9556 2.4 GHz 802.11b/g/n 3x3 INPUT: WPS button LED: Power, WiFi, LAN, RSSI indicator Serial: Header Next to Black metal shield Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4GHz WiFi (correct MAC) - Installation via EVA bootloader - OpenWRT sysupgrade - Buttons - Most LEDs Not working: - 2 RSSI LEDs AVM used for RSSI{0,1} two of the Ethernet PHYs LEDs which they control over MDIO. Our driver doesn't expose these LEDs as GPIOs. While it is possible to implement this feature, it would require an additional kernel patch for a minor functionality. Installation via EVA: In the first seconds after Power is connected, the bootloader will listen for FTP connections on 192.168.178.1. Firmware can be uploaded like following: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put openwrt-sysupgrade.bin mtd1 Note that this procedure might take up to two minutes. You need to powercycle the Device afterwards to boot OpenWRT. Signed-off-by: David Bauer <mail@david-bauer.net>
6 years ago
fritz450e|\
ar71xx: add support for GL.iNet GL-USB150 GL.iNet GL-USB150 is an USB dongle WiFi router, based on Atheros AR9331. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - Realtek RTL8152B USB to Ethernet bridge (connected with AR9331 PHY4) - 1T1R 2.4 GHz - 2x LED, 1x button - UART header on PCB Flash instruction: Vendor firmware is based on OpenWrt CC. GUI or sysupgrade can be used to flash LEDE firmware. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
gl-usb150|\
ar71xx: add support for Aerohive AP-121 This adds support for Aerohive AP-121 access point. Specification: - SoC: Atheros AR9344-BC2A at 560MHz - WiFi 1: 2.4GHz Atheros AR9340? - SoC - WiFi 2: 5.0GHz Atheros AR9382-AL1A - Memory: 128MB from 2x Nanya NT5TU32M16DG-AC - SPI: 1MB Macronix MX25L8006E - NAND: 128MB Hynix H27U1G8F2BTR-BC - Ethernet: Atheros AR8035-A - USB: 1x 2.0 - TPM: Atmel SC3204 Flashing: 1. Hook into UART (9600 baud) and enter U-Boot. You may need to enter a password of administrator or AhNf?d@ta06 if prompted. 2. Once in U-Boot, download and flash LEDE factory image over tftp: dhcp; setenv serverip tftp-server-ip; tftpboot 0x81000000 lede-ar71xx-nand-hiveap-121-squashfs-factory.bin; nand erase 0x800000 0x800000; nand write 0x81000000 0x800000 0x800000; reset; Signed-off-by: Chris Blake <chrisrblake93@gmail.com> [minor text changes in commit subject and description, fixed alphabetical order in etc/diag.sh, use only model name in lib/ar71xx.sh, fixed code style issues in mach-hiveap-121.c, ubinized factory image] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
hiveap-121|\
ar71xx: add support for OCEDO Koala This commit adds support for the OCEDO Koala SOC: Qualcomm QCA9558 (Scorpion) RAM: 128MB FLASH: 16MiB WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3 WLAN2: QCA9880 5 GHz 802.11nac 3x3 INPUT: RESET button LED: Power, LAN, WiFi 2.4, WiFi 5, SYS Serial: Header Next to Black metal shield Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi - 5 GHz WiFi - TFTP boot from ramdisk image - Installation via ramdisk image - OpenWRT sysupgrade - Buttons - LEDs Installation seems to be possible only through booting an OpenWRT ramdisk image. Hold down the reset button while powering on the device. It will load a ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8. Note: depending on the present software, the device might also try to pull a file called 'koala-uimage-factory'. Only the name differs, it is still used as a ramdisk image. Wait for the ramdisk image to boot. OpenWRT can be written to the flash via sysupgrade or mtd. Due to the flip-flop bootloader which we not (yet) support, you need to set the partition the bootloader is selecting. It is possible from the initramfs image with > fw_setenv bootcmd run bootcmd_1 Afterwards you can reboot the device. Signed-off-by: David Bauer <mail@david-bauer.net>
6 years ago
koala|\
ar71xx: add support for Ubiquiti Litebeam M5 Specification: - SoC: Atheros AR9342 - Flash: 8 MiB - RAM: 64 MiB - UART: 1x UART on PCB - 115200 8N1 - Ethernet: 1 x 100 Mbit with passive PoE (24V/0.2A) Doesn't work: * Flash via TFTP with Ubiquiti Uboot Installation via vendor firmware: - upload factory image via webinterface Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
6 years ago
lbe-m5|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
loco-m-xw|\
ar71xx: Add net config for MR12 & MR16 Both the MR12 and MR16 are single gigabit ethernet devices, similar to the MR18. This change gives them the correct network config on a fresh install. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> [Jo-Philipp Wich: adjust for alphabetical ordering, line wrap commit msg] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years ago
mr12|\
mr16|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
mr1750|\
mr1750v2|\
mr18|\
mr600|\
mr600v2|\
mr900|\
mr900v2|\
mynet-rext|\
ar71xx: add support for PQI Air Pen SoC: AR9331 Ethernet x1, Wireless 2.4G, uSD card slot x1. USB Power, include Li-Po Battery. Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com> Changes in v2: alphabetical ordering, tabs fron spaces.
7 years ago
pqi-air-pen|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
rb-411|\
ar71xx: fix network config for Mikrotik RB411U Mikrotik RB411U has only one ethernet port - eth0. This patch allows to create correct config with one lan section. Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
7 years ago
rb-411u|\
ar71xx: add support for the MikroTik RB911-2Hn/5Hn boards The patch adds support for the MikroTik RB911-2Hn (911 Lite2) and the RB911-5Hn (911 Lite5) boards: https://mikrotik.com/product/RB911-2Hn https://mikrotik.com/product/RB911-5Hn The two boards are using the same hardware design, the only difference between the two is the supported wireless band. Specifications: * SoC: Atheros AR9344 (600MHz) * RAM: 64MiB * Storage: 16 MiB SPI NOR flash * Ethernet: 1x100M (Passive PoE in) * Wireless: AR9344 built-in wireless MAC, single chain 802.11b/g/n (911-2Hn) or 802.11a/g/n (911-5Hn) Notes: * Older versions of these boards might be equipped with a NAND flash chip instead of the SPI NOR device. Those boards are not supported (yet). * The MikroTik RB911-5HnD (911 Lite5 Dual) board also uses the same hardware. Support for that can be added later with little effort probably. Installation: 1. Setup a DHCP/BOOTP Server with the following parameters: * DHCP-Option 66 (TFTP server name): pointing to a local TFTP server within the same subnet of the DHCP range * DHCP-Option 67 (Bootfile-Name): matching the initramfs filename of the to be booted image. The usable intramfs files are: - openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf - openwrt-ar71xx-mikrotik-vmlinux-initramfs-lzma.elf - openwrt-ar71xx-mikrotik-rb-nor-flash-16M-initramfs-kernel.bin 2. Press the reset button on the board and keep that pressed. 3. Connect the board to your local network via its ethernet port. 4. Release the button after the LEDs on the board are turned off. Now the board should load and start the initramfs image from the TFTP server. 5. Upload the sysupgrade image to the board with scp: $ scp openwrt-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/fw.bin 5. Log in to the running system listening on 192.168.1.1 via ssh as root (without password): $ ssh root@192.168.1.1 7. Flash the uploaded firmware file from the ssh session via the sysupgrade command: root@OpenWrt:~# sysupgrade /tmp/fw.bin Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
6 years ago
rb-911-2hn|\
rb-911-5hn|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
rb-911g-2hpnd|\
rb-911g-5hpacd|\
rb-911g-5hpnd|\
rb-912uag-2hpnd|\
rb-912uag-5hpnd|\
ar71xx: add support for MikroTik RouterBOARD 921GS-5HPacD r2 (mANTBox 15s) This patch adds support for the MikroTik RouterBOARD 921GS-5HPacD r2 (mANTBox 15s), an outdoor sector antenna with a built-in 802.11ac wireless router. Additionally, it adds a new profile for devices with >= 128 MB NAND flash and 802.11ac to the ar71xx/mikrotik subtarget. See https://mikrotik.com/product/RB921GS-5HPacD-15S for more info. Specifications: - SoC: Qualcomm Atheros QCA9558 (720 MHz) - RAM: 128 MB - Storage: 128 MB NAND - Wireless: external QCA9822 802.11a/ac 2x2:2 - Ethernet: 1x 1000/100/10 Mbps, integrated, via AR8031 PHY, passive PoE in - SFP: 1x host Working: - Board/system detection - NAND storage detection - Wireless - Ethernet - 1x user LED - Reset button - Sysupgrade Untested: - SFP cage (probably not working) Installation: - Boot initramfs image via TFTP and then flash sysupgrade image Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
6 years ago
rb-921gs-5hpacd-r2|\
ar71xx: add support for MikroTik RouterBOARD 922UAGS-5HPacD This patch adds support for the MikroTik RouterBOARD 922UAGS-5HPacD with a built-in 802.11ac High-Power radio (31dBm). See https://mikrotik.com/product/RB922UAGS-5HPacD for more info. Specifications: - SoC: Qualcomm Atheros QCA9557 (720 MHz) - RAM: 128 MB - Storage: 128 MB NAND - Wireless: external QCA9882 802.11a/ac 2x2:2 - Ethernet: 1x 1000/100/10 Mbps, integrated, via AR8031 PHY, passive PoE-in 24V - SFP: 1x host - USB: 1x 2.0 type A - PCIe: 1x Mini slot (also contains USB 2.0 for 3G/LTE modems) - SIM slot: 1x mini-SIM Working: - Board/system detection - NAND storage detection - PCIe - USB: Type A & mini PCIe - Wireless - Ethernet - LED's (excl. SFP and RSSI levels) - Reset button - Sysupgrade Not working: - SFP cage Installation: - Boot vmlinux-initramfs image via BOOTP/TFTP and then flash sysupgrade image using "sysupgrade -n" Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
5 years ago
rb-922uags-5hpacd|\
ar71xx: add support for RB LHG 5nD This patch adds support for the MikroTik RouterBOARD LHG 5 https://routerboard.com/RBLHG-5nD Specifications: - SoC: Atheros AR9344 (600MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Wireless: builtin AR9344 5GHz, 2x2:2 - Ethernet: 1x100M Initial flash via initramfs, like all other RB devices. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years ago
rb-lhg-5nd|\
ar71xx: add support for RB mAP L-2nD This patch adds support for the MikroTik RouterBOARD mAP lite https://routerboard.com/RBmAPL-2nD Specifications: - SoC: Qualcomm QCA9533 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Wireless: builtin QCA9533, 2x2:2 - Ethernet: 1x100M This is another 16M SPI NOR mikrotik device. The machine file is named mach-rbspi.c because I plan to add support for several of the other spi-based RouterBOARD devices in subsequent patches: they share most of the hardware and thus the same codebase. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years ago
rb-mapl-2nd|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
rb-sxt2n|\
ar71xx: Add support for Mikrotik RB SXT 2nD r3 The Mikrotik RouterBOARD SXT 2nD r3 is an outdoor WiFi AP / CPE with a single 2.4 GHz radio and a 100 Mbps Ethernet port. The device similar to the SXT 2nD r2, but it has SPI NOR flash instead of NAND flash. Hardware -------- CPU: Atheros AR9344 (600 MHz) RAM: 64 MiB FLASH: 16 MiB SPI NOR W25Q128 ETH: 1x 100 Mbps Atheros AG71xx WiFi: 2T2R 802.11b/g/n (ath9k) Power: Passive PoE 8-30 V Installation instructions: 1. Boot openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf using a DHCP+TFTP server. 2. Erase the "firmware" partition using the mtd command. This should no longer be required once this patch is merged. 3. Use sysupgrade to install to flash. The file openwrt-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin should be used. Signed-off-by: Xavier Douville <github@douville.org>
5 years ago
rb-sxt-2nd-r3|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
rb-sxt5n|\
ar71xx: complete support for RB wAP 2nD This patch adds support for the MikroTik RouterBOARD wAP https://mikrotik.com/product/RBwAP2nD Specifications: - SoC: Qualcomm QCA9533 (650 MHz) - RAM: 64 MB - Storage: 16 MB NOR SPI flash - Wireless: built-in QCA9533, 2x2:2 - Ethernet: 1x100M (802.3af/at POE in) This patch adds missing code to fully support wAP. Machfile already contained configuration for wAP 2nD but device specific configuration like LEDs etc. was missing. Installation: 1. Login to the Mikrotik WebUI to backup your licence keys 2. Setup a DHCP/BOOTP server with: - DHCP-Option 66 (TFTP server name) pointing to a local TFTP server within the same subnet of the DHCP range - DHCP-Option 67 (Bootfile-Name) matching the initramfs filename of the to be booted image 3. Connect the port labeled internet to your local network 4. Keep the reset button pushed down and power on the board The board should load and start the initramfs image from the TFTP server. Login as root/without password to the started LEDE via SSH listing on IPv4 address 192.168.1.1. Use sysupgrade to install LEDE. Revert to RouterOS Use the "rbcfg" package on in LEDE: - rbcfg set boot_protocol bootp - rbcfg set boot_device ethnand - rbcfg apply Open Netinstall and reboot routerboard. Now Netinstall sees RouterBOARD and you can install RouterOS. If NetInstall gets stuck on Sending offer just wait for it to timeout and then close and open Netinstall again. Click on install again. In order for RouterOS to function properly, you need to restore license for the device. You can do that by including license in NetInstall. Signed-off-by: Robert Marko <robimarko@gmail.com>
7 years ago
rb-wap-2nd|\
ar71x: add support for Mikrotik Routerboard wAP R This commit adds support for the Mikrotik wAP R (RBwAPR-2nD). The change is based on 3b15eb0 which added support for the wAP 2nD. This change lacks LED support. Specifications: - SoC: Qualcomm QCA9531 (650 MHz) - RAM: 64 MB - Storage: 16 MB NOR SPI flash - Wireless: built-in QCA9531, 802.11b/g/n 2x2:2 - Ethernet: 1x100Mbps - Power: 9-30V Passive PoE, 9-30V DC jack, 9-30V automotive jack - SIM card slot - Mini-PCIe slot Installation: 1. Login to the Mikrotik WebUI to backup your licence key 2. Change the following settings in System->Routerboard->Settings: - Boot device: try ethernet once then NAND - Boot protocol: DHCP - Force Backup Booter: checked 3. Setup a DHCP/BOOTP server with: - DHCP-Option 66 (TFTP server name) pointing to a local TFTP server within the same subnet of the DHCP range - DHCP-Option 67 (Bootfile-Name) matching the initramfs filename of the to be booted image, e.g. openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf 4. Power off the device 5. If this is the second attempt to boot OpenWRT or the boot device isn't "try ethernet once then NAND," press and hold the reset button while powered off. If this is the first attempt, this step isn't necessary. 6. Power on the device, holding the reset button for 15-20s if already pressed from the previous step. The board should load and start the initramfs image from the TFTP server. Login as root/without password to the started OpenWRT via SSH listing on IPv4 address 192.168.1.1. Use sysupgrade to install OpenWRT. Revert to RouterOS Use the "rbcfg" package on in OpenWRT: - rbcfg set boot_protocol bootp - rbcfg set boot_device ethnand - rbcfg apply Open Netinstall and reboot routerboard. Now Netinstall sees RouterBOARD and you can install RouterOS. If NetInstall gets stuck on Sending offer just wait for it to timeout and then close and open Netinstall again. Click on install again. In order for RouterOS to function properly, you need to restore license for the device. You can do that by including license in NetInstall. Signed-off-by: David Ehrmann <ehrmann@gmail.com>
6 years ago
rb-wapr-2nd|\
ar71xx: add support for MikroTik RouterBOARD wAP G-5HacT2HnD (wAP AC) This patch adds support for the MikroTik RouterBOARD wAP G-5HacT2HnD (wAP AC), a small weatherproof dual band, dual-radio 802.11ac wireless AP with integrated omnidirectional anntennae and one 10/100/1000 Mbps Ethernet ports. See https://mikrotik.com/product/RBwAPG-5HacT2HnD for more info. Specifications: - SoC: Qualcomm Atheros QCA9556 - RAM: 64 MB - Storage: 16 MB NOR - Wireless: · Atheros AR9550 (SoC) 802.11b/g/n 2x2:2, 2 dBi antennae · Qualcomm QCA9880 802.11a/n/ac 3x3:3, 2 dBi antennae - Ethernet: Atheros AG71xx (SoC, AR8033), 1x 1000/100/10 port, passive PoE in Working: - Board/system detection - Sysupgrade - Serial console - Ethernet - 2.4 GHz radio - 5 GHz radio - Reset button Not working: - LEDs (added according to Mikrotik's GPL sources but not functional) Unsupported: - ZT2046Q SPI temperature and voltage sensor Contributors: Giuseppe Tipaldi (@Ciusss89) Ricky (@rickydee) Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: whitespace fix, use PHYADDR instead of PHYMASK]
6 years ago
rb-wapg-5hact2hnd|\
ar71xx: add support for TP-Link RE355 This device is identical as TP-Link RE450 RE355 is a dual-band AC1200 router, based on Qualcomm/Atheros QCA9558+QCA9880. Specification: 720/600/200 MHz (CPU/DDR/AHB) 64/128 MB of RAM (DDR2) 8 MB of FLASH (SPI NOR) 3T3R 2.4 GHz 3T3R 5 GHz 1x 10/100/1000 Mbps Ethernet 7x LED, 3x button UART header on PCB Flash instruction: Web: Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use OEM System Tools - Firmware Upgrade site. Signed-off-by: Henryk Heisig <hyniu@o2.pl>
6 years ago
re355|\
ar71xx: add support for TP-Link RE450 Add full support for TP-Link RE450. The wireless SoC is similiar to Archer C7: QCA9558 + QCA9880 (pci). The ethernet interface is AR8035, but the mdio is connected to the gpio and the chipset builtin mdio bus isn't used, which is unique (and weird), so the kernel gpio mdio module is used. The two ethernet leds are connected to the GPIO, so they are both configured, one to indicate link status and the other to indicate data transfer. The generation of the image was added to the image Makefile. The return value of tplink-safeloader is not ignored anymore (to fail on error) The result factory image is flashable from the stock web ui. Signed-off-by: Tal Keren <kooolk@gmail.com> [rd@radekdostal.com: ar71xx: RE450: do not build RE450 for nand] Signed-off-by: Radek Dostál <rd@radekdostal.com> [hyniu@o2.pl: ar71xx: RE450: Renaming LED accordance with the standard] Signed-off-by: Henryk Heisig <hyniu@o2.pl> [jo@mein.io: squash fixes from Radek and Henryk into original commit] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years ago
re450|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
rocket-m-xw|\
ar71xx: add Abicom SC300M support Support Abicom International Scorpion SC300M Module QCA9550 700MHz Extended Temperature Range 256MB DDR2 256MB Nand Flash 16MB SPI Flash 802.11a/na/b/g/ng GPIO x 22, USB x2, PCIe x2 10/100/1000 Ethernet 23dBm, Optional Onboard Antenna DC Input, 8-20V DC 85 x 55 mm Signed-off-by: Conor O'Gorman <i@conorogorman.net>
7 years ago
sc300m |\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
tl-mr10u|\
tl-mr11u|\
tl-mr12u|\
tl-mr13u|\
tl-mr3020|\
tl-mr3040|\
tl-mr3040-v2|\
tl-wa701nd-v2|\
tl-wa7210n-v2|\
tl-wa750re|\
tl-wa801nd-v2|\
tl-wa830re-v2|\
tl-wa850re|\
ar71xx: add support for TP-Link TL-WA850RE v2 TP-Link TL-WA850RE v2 is a wall-plug N300 Wi-Fi range extender, based on Qualcomm/Atheros QCA9533 v2. Short specification: - 550/391/195 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 32 MB of RAM (DDR1) - 4 MB of FLASH - 2T2R 2.4 GHz - 2x internal antennas (embedded on PCB) - 9x LED (all can be turned off with GPIO15), 2x button - UART (J3) header on PCB Flash instruction: use "factory" image directly in vendor GUI. Warning: this device does not include any kind of recovery mechanism in the bootloader and disassembling process is not trivial. You can access vendor firmware over serial line using: - login: root - password: sohoadmin Image was tested only in US version of the device, but should work also with the same device version sold in other countries. Available FLASH space, with LEDE trunk, is only 240 KB. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
tl-wa850re-v2|\
ar71xx: fix typo in network defaults Commit 9fec39a (ar71xx: add support for TP-Link TL-WA855RE v1) introduced a typo in 02_network, fix it by removing the stray paren. Reported-by: Henryk Heisig <hyniu@o2.pl> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
tl-wa855re-v1|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
tl-wa901nd|\
tl-wa901nd-v2|\
tl-wa901nd-v3|\
tl-wa901nd-v4|\
ar71xx: add support for TP-Link TL-WA901ND v5 The TL-WA901ND v5 has the same hardware as v4, although the PCB has a different layout. Installation from factory is done via TFTP. (rename -factory image to wa901ndv4_tp_recovery.bin for tftp) Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 years ago
tl-wa901nd-v5|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
tl-wr703n|\
ar71xx: add support for TP-Link WR802N v1 This patch adds support solely for version 1 of the TP-Link WR802N. It is based on Rick Pannen's patch posted on the OpenWrt devel list. Signed-off-by: Julius Schulz-Zander <julius@inet.tu-berlin.de>
8 years ago
tl-wr802n-v1|\
ar71xx: add support for TL-WR802N Version 2 This patch adds support for the TP-Link TL-WR802N Version 2. Specification: - SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc) - RAM: 32 MiB - Storage: 4 MiB of FLash on board - Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) Installation through OEM Web Interface: - Connect to TL-WR802N by Ethernet or Wi-Fi - Go to http://192.168.0.1 (default user is "admin" & password is "admin) - Go to "System Tools -> Firmware Upgrade" - Browse for firmware "*.factory-us.bin" or "*.factory-eu.bin" for eu model - Click upgrade Installation through tftp: Note: T_OUT, T_IN and GND on the board must be connected to USB TTL Serial Configuration 115200 8n1 - Boot the TL-WR802N - When "Autobooting in 1 seconds" appears type "tpl" followed by enter - Connect to the board Ethernet port (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10) - tftpboot 0x80000000 <Firmware Image Name> - Record the result of "printenv bootcmd" - Enter "erase <Result of 'printenv bootcmd'> +0x3c0000" (e.g erase 0x9f020000 +0x3c0000) - Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000" (e.g cp.b 0x80000000 0x9f020000 0x3c0000) - Enter "bootm <Result of 'printenv bootcmd'>" (e.g bootm 0x9f020000) Signed-off-by: Thomas Roberts <tom.p.roberts@gmail.com>
7 years ago
tl-wr802n-v2|\
ar71xx: add support for TP-Link TL-WR902AC v1 TP-Link TL-WR902AC v1 is a pocket-size, dual-band (AC750), successor of TL-MR3020 (both devices use very similar enclosure, in same size). New device is based on Qualcomm QCA9531 v2 + QCA9887. FCC ID: TE7WR902AC. Specification: - 650/391/216 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 1x USB 2.0 (GPIO-controlled power) - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz (QCA9531) - 1T1R 5 GHz (QCA9887) - 5x LED (GPIO-controlled), 2x button, 1x 3-pos switch - UART pads on PCB (TP1 -> TX, TP2 -> RX, TP3 -> GND, TP4 -> 3V3, jumper resitors are missing on TX/RX lines) - 1x micro USB (for power only) Flash instructions: Use "factory" image under vendor GUI. Recovery instructions: This device contains tftp recovery mode inside U-Boot. You can use it to flash LEDE (use "factory" image) or vendor firmware. 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "lede-ar71xx-generic-tl-wr902ac-v1-squashfs-factory.bin" to "wr902acv1_un_tp_recovery.bin" and place it in tftp server dir. 3. Connect PC with LAN port, press the reset button, power up the router and keep button pressed until WPS LED lights up. 4. Router will download file from server, write it to flash and reboot. Root access over serial line in vendor firmware: root/sohoadmin. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
tl-wr902ac-v1|\
ar71xx: Add support for PISEN TS-D084 PISEN TS-D084 is an wireless router with a battery and integrated power supply based on Atheros AR9331. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 1x 10/100 Mbps Ethernet - 1T1R 2.4 GHz (AR9331) - 1x USB 2.0 Flash instruction: The manufacturer are using exactly the same firmware header as TP-LINK TL-WR703N (including device ID!). Simply upload the factory firmware into WebUI and flashing is done. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
6 years ago
ts-d084|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
tube2h|\
ar71xx: fix network setup for UniFi The Ubiquiti UniFi APs just have eth0. Until now, the setup script fell through to the default case and configured the (not present) eth1 as WAN with DHCP. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 years ago
unifi|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
unifiac-lite|\
ar71xx: add support for Nokia WI2A-AC200i Specifications: - SoC: Qualcomm QCA9558 (720 MHz) - RAM: 256MB - Storage: 1MB NOR, 128 MB NAND flash - Ethernet: 1x1000M Installation: 1. Connect to serial console on the board 2. Boot initramfs image over u-boot 3. Copy image to the device and run sysupgrade Installation without serial console is not supported at this time Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years ago
wi2a-ac200i|\
ar71xx: add support for AR9331 based Hak5 devices This adds support for AR9331 based Hak5 penetration testing tools: - WiFi Pineapple NANO - LAN Turtle - Packet Squirrel WiFi Pineapple NANO specifications: - SoC: Atheros AR9331 (400 MHz) - RAM: 64 MB (DDR2) - FLASH: 16 MB - WiFi: 1T1R AR9331 (built-in), 1T1R AR9271 (built-in via USB bus) - Ethernet: 1x FE over USB (ASIX AX88772A) - Ports: 2x RP-SMA for antennas, 1x USB 2.0 (host), 1x micro SD - Power: USB 5 V, 1.5 A - Other: status LED, reset button LAN Turtle specifications: - SoC: Atheros AR9331 (400 MHz) - RAM: 64 MB (DDR2) - FLASH: 16 MB - WiFi: none - Ethernet: 1x FE (AR9331), 1x FE over USB (Realtek RTL8152B) - Ports: 1x RJ45, version dependent: micro SD or 3G SIM slot - Power: USB 5 V, 0.5 A - Other: status LED, reset button (inside, on PCB) Packet Squirrel specifications: - SoC: Atheros AR9331 (400 MHz) - RAM: 64 MB (DDR2) - FLASH: 16 MB - WiFi: none - Ethernet: 2x FE (AR9331) - Ports: 2x RJ45, 1x USB 2.0 - Power: USB 5 V, 0.12 A - Other: status LED, reset button, 4-way switch Flash instructions for all 3 devices: Original firmware is based on OpenWrt. Use sysupgrade via SSH to flash. Signed-off-by: Sebastian Kinne <contact@sebkinne.com> [squashed commits, combined and reworked mach files, aligned board naming with general convention, fixed minor issues, tested on real hardware, reworded commit subject and description] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
6 years ago
wifi-pineapple-nano|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
wndap360|\
wp543)
ucidef_set_interface_lan "eth0"
;;
ar71xx: add user-space support for the OpenMesh A40 Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
8 years ago
a40|\
ar71xx: add user-space support for the OpenMesh A60 Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
8 years ago
a60|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
alfa-ap96|\
alfa-nx|\
ar71xx: set GE interface as wan by default in Wallys DR344 This aligns default network interfaces configuration with vendor firmware: GE (eth0) -> wan, FE (eth1) -> lan. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
dr344|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
gl-ar150|\
gl-ar300m|\
gl-domino|\
gl-inet|\
gl-mifi|\
jwap003|\
ar71xx: add user-space support for the OpenMesh OM2Pv4/-HSv4 Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
8 years ago
om2p-hsv4|\
ar71xx: base-files: alphabetical reordering Re-order the cases of base-files/* alphabetically. Also merge some cases in diag.sh Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 years ago
om2pv4|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
pb42|\
pb44|\
rb-951ui-2hnd|\
routerstation|\
tl-wr710n|\
tl-wr720n-v3|\
tl-wr810n|\
ar71xx: add support for TP-Link TL-WR810N v2 TP-Link TL-WR810N v2 is a compact Wi-Fi router with two Ethernet ports. Specification: - QCA9533 (650 MHz) - 32 MB RAM - 8 MB Flash - 300 Mbps Wi-Fi 2.4 GHz - 2x 10/100 Mbps Ethernet (eth0, eth1) - UART on testpads on PCB - 1x LED (GPIO-controlled) - 1x reset/WPS button - 1x slide-switch with 2 GPIO inputs Flash instructions: - Flash as regular firmware update in Web UI - Default: 192.168.0.254 / admin / admin - Select *-factory.bin When holding reset button during power-up, U-Boot requests a file 'wr810nv1_tp_recovery.bin' from TFTP server at 192.168.0.66 Signed-off-by: Paul Wassi <p.wassi@gmx.at>
7 years ago
tl-wr810n-v2|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
wpe72|\
wrtnode2q)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
all0258n|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
all0315n|\
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
dlan-hotspot|\
dlan-pro-500-wp|\
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ja76pf2|\
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
rocket-m-ti|\
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ubnt-unifi-outdoor)
ucidef_set_interface_lan "eth0 eth1"
;;
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
wzr-hp-g300nh2)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "2:wan"
;;
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ap132|\
ap136|\
ap152|\
rb-750gl|\
rb-751g|\
rb-951g-2hnd|\
ar71xx: add support for MikroTik hAP ac This patch adds initial support for the MikroTik RouterBOARD hAP ac (RB962UiGS-5HacT2HnT). All functions are supported except: -SFP cage (eth1) is not working -WLAN LEDs are not working Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
7 years ago
rb-962uigs-5hact2hnt|\
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
wlr8100|\
wzr-hp-g450h)
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ap135-020|\
ap136-020|\
ar71xx: add support for Buffalo BHR-4GRV2 Signed-off-by: FUKAUMI Naoki <naobsd@gmail.com>
8 years ago
bhr-4grv2|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
tew-823dru|\
tl-wr1043nd-v2|\
wzr-450hp2)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
;;
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ap136-010|\
ap147-010|\
nbg6616|\
nbg6716)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
board.d: merge ucidef_add_switch() and ucidef_add_switch_ports() This changes uci-defaults-new.sh, config_generate and all relevant board.d files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into a single function. Also removes now superfluous enable and reset arguments. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47721
9 years ago
ucidef_add_switch "switch0" \
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
;;
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ap143|\
rb-433|\
rb-433u)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
"1:lan" "2:lan" "5@eth1"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
;;
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
archer-c5|\
archer-c7|\
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
tl-wdr4900-v2)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
ar71xx: Fix network setup for TP-Link Archer C25 v1 Network for the Archer C25 v1 is set up without switch for no obvious reason. The LED setup is even done switch-based. This patch changes network setup so a switch is created. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years ago
archer-c25-v1|\
ar71xx: fix port order on TP-Link Archer C60 v1/v2 The labels on the LAN ports of the TP-Link Archer C60 v1/v2 are actually inverted compared to the ports of the internal switch. Add this information to 02_network. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> (cherry picked from commit 14a07fa1f000f962d55bf53cfe9b128448b1f11f)
4 years ago
archer-c60-v1|\
archer-c60-v2|\
ar71xx: Fix network setup for TP-Link Archer C25 v1 Network for the Archer C25 v1 is set up without switch for no obvious reason. The LED setup is even done switch-based. This patch changes network setup so a switch is created. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years ago
rb-750-r2|\
rb-750p-pbr2|\
rb-750up-r2|\
rb-951ui-2nd|\
rb-952ui-5ac2nd)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
ar71xx: add support for TP-Link Archer C58 v1 TP-Link Archer C58 v1 is a dual-band AC1350 router, based on Qualcomm QCA9561 + QCA9886. It looks like Archer C59 v1 without USB port. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 6x LED, 3x button - UART header on PCB, RX, TX at TP4+5 (backside) QCA9886 wlan needs pre_cal_data file and enable ieee80211 phy hotplug to patch macaddress. Flash instruction: Use "factory" image directly in vendor GUI. Recovery method: 1. Set PC to fixed ip address 192.168.0.66/24. 2. Download "lede-ar71xx-generic-archer-c58-v1-squashfs-factory.bin" and rename it to "tp_recovery.bin". 3. Start a tftp server with the file "tp_recovery.bin" in its root directory. 4. Turn off the router. 5. Press and hold Reset button. 6. Turn on router with the reset button pressed and wait ~15 seconds. 7. Release the reset button and after a short time the firmware should be transferred from the tftp server. 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin erase 0x9f020000 +$filesize cp.b $fileaddr 0x9f020000 $filesize reset This commit is based on GitHub PR#1112 Signed-off-by: Henryk Heisig <hyniu@o2.pl>
7 years ago
archer-c58-v1|\
ar71xx: add support to TP-Link Archer C59v1 and C60v1 TP-Link Archer C59v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - 8x LED (controled by 74HC595), 3x button - UART header on PCB TP-Link Archer C60v1 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561+QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Currently not working: - Port LAN1 on C59, LAN4 on C60 - WiFi 5GHz (missing ath10k firmware for QCA9886 chip) - Update from oficial web interface ( tplink-saveloader not support "product-info") Flash instruction: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-cXX-v1-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. reset Signed-off-by: Henryk Heisig <hyniu@o2.pl> [Jo-Philipp Wich: remove duplicate ATH79_MACH_ARCHER_C59/C60_V1 entries] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
archer-c59-v1|\
ar71xx: add support for TP-Link Archer C59 v2 TP-Link Archer C59v2 is a dual-band AC1350 router based on Qualcomm/Atheros QCA9561+QCA9886 chips. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - USB 2.0 port - UART header on PCB Flash instruction: - via web UI: 1. Download openwrt-ar71xx-generic-archer-c59-v2-squashfs-factory.bin 2. Login to router and open the Advanced tab 3. Navigate to System Tools -> Firmware Upgrade 4. Upload firmware using the Manual Upgrade form - via TFTP: 1. Set PC to fixed ip address 192.168.0.66 2. Download openwrt-ar71xx-generic-archer-c59-v2-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Keith Maika <keithm@aoeex.com>
6 years ago
archer-c59-v2|\
ar71xx: add support for Fritz!Box 4020 This commit adds support for the AVM Fritz!Box 4020 WiFi-router. SoC: Qualcomm Atheros QCA9561 (Dragonfly) 750MHz RAM: Winbond W971GG6KB-25 FLASH: Macronix MX25L12835F WiFi: QCA9561 b/g/n 3x3 450Mbit/s USB: 1x USB 2.0 IN: WPS button, WiFi button OUT: Power LED green, Internet LED green, WLAN LED green, LAN LED green, INFO LED green, INFO LED red UART: Header Next to Black metal shield Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet (LAN + WAN) - WiFi (correct MAC) - Installation via EVA bootloader - OpenWRT sysupgrade - Buttons - LEDs Not working: - USB port Installation via EVA: In the first seconds after Power is connected, the bootloader will listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1). Firmware can be uploaded like following: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put openwrt-sysupgrade.bin mtd1 Note that this procedure might take up to two minutes. After transfer is complete you need to powercycle the device to boot OpenWRT. Signed-off-by: David Bauer <mail@david-bauer.net>
6 years ago
fritz4020|\
ar71xx: fix lan ports on archer C59 and C60 Signed-off-by: Henryk Heisig <hyniu@o2.pl>
7 years ago
rb-450g)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
;;
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
arduino-yun|\
dir-505-a1|\
tl-wa801nd-v3)
ucidef_set_interface_lan "eth1"
;;
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
bsb)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
"0@eth1" "1:lan" "3:lan"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
;;
ar71xx: add support for the Airtight C-60 This patch adds support for the Airtight C-60. SOC: Atheros AR9344 rev 2 (CPU:560.000MHz) RAM: 128 MiB NOR: MX25L3205D 4MiB NAND: ST Micro NAND 32MiB 3,3V 8-bit SW-NET: AR8327N (2 Ports) WLAN1: Dual-Band AR9340 Rev:2 (built-in SoC) WLAN2: Dual-Band AR9300 Rev:4 PCIe Chip The switch is setup for an accesspoint: LAN1: (gigabit) is the wan-port. LAN2: (fast ethernet) is bridged with the br-lan. Flashing Guide (via initramfs): 1. Connect a PC to the serial port of the C-60. power up the C-60. Enter u-boot command prompt: #> nand erase #> setenv bootcmd "bootm 0x9f060000" #> saveenv #> setenv ipaddr 192.168.1.1 #> setenv netmask 255.255.255.0 #> setenv serverip 192.168.1.100 #> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin #> tftpboot #> bootm 2. Wait for the C-60 to boot LEDE. On the root prompt. Enter: # ubiformat /dev/mtd4 # ubiattach -p /dev/mtd4 3. After that copy the sysupgrade.tar onto the router and run: # sysupgrade sysupgrade.tar to flash the image. Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided a C-60 unit and he helped with debugging the switch, LEDs and platfrom support. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
8 years ago
c-60)
ucidef_add_switch "switch0" \
"0@eth0" "3:wan" "4:lan"
;;
ar71xx: Add eTactica EG-200 support EG-200 is a DIN rail mountable device with one ethernet port, wifi, an RS-485 port, and an internal USB attached uSD card reader. Two leds, "modbus" and "etactica" are managed by userspace applications in factory firmware. Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Karl Palsson <karlp@etactica.com>
8 years ago
rme-eg200)
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_set_interface_lan "eth0" "dhcp"
;;
ar71xx: fix COMFAST CF-E375AC support Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
6 years ago
cf-e375ac|\
rb-map-2nd)
ucidef_add_switch "switch0" \
"0@eth0" "1:wan" "2:lan"
;;
ar71xx: add support for COMFAST CF-E385AC COMFAST CF-E385AC is an AC2200 ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9558 + QCA9984 + QCA8337N. Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 256 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 2x 10/100/1000 Mbps Ethernet, with PoE support - 3T3R 2.4 GHz (QCA9558), with external LNA and PA (SE2576L) - 4T4R 5 GHz (QCA9984), with external FEM (SKY85728-11) - 7x internal antennas - 1x RGB LED (driven by GPIO) - 1x button (reset) - UART, LEDs/GPIO and USB headers on PCB - external watchdog (Pericon Technology PT7A7514) Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
6 years ago
cf-e385ac)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "1:wan" "6@eth1"
;;
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
cpe210|\
ar71xx: add support for TP-Link WBS210/510 The devices are mostly identical to the CPE210/510, but use external antennas. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
7 years ago
cpe510|\
wbs210|\
wbs510)
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
"0@eth0" "5:lan" "4:wan"
;;
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
cr3000)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
"0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
;;
cr5000|\
dgl-5500-a1|\
dhp-1565-a1|\
dir-825-c1|\
dir-835-a1|\
esr900|\
mynet-n750|\
ar71xx: fix TL-WR1043N v5 port mapping fixes 5660c8fb20 ("ar71xx: TL-WR1043N v5: fix mapping of LAN ports to labels on housing.") Signed-off-by: John Crispin <john@phrozen.org>
6 years ago
sr3200)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
ar71xx: add support for TP-Link TL-WR1043N v5 TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4, except that the USB port has been removed and there is no longer a removable antenna option. The software is more in line with the Archer series in that it uses a nested bootloader scheme. Specifications: - QCA9563 at 775 MHz - 64 MB RAM - 16 MB flash - 3 (non-detachable) Antennas / 450 Mbit - 1x/4x WAN/LAN Gbps Ethernet (QCA8337) - reset and Wi-Fi buttons Signed-off-by: Tim Thorpe <tim@tfthorpe.net> Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
7 years ago
tl-wr1043n-v5)
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
ar71xx: TL-WR1043N v5: fix mapping of LAN ports to labels on housing. Reversed the numbering of the LAN ports in Luci so as to match the port numbers on the housing. Signed-off-by: Tim Thorpe <tim@tfthorpe.net>
6 years ago
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
;;
ar71xx: add support for D-Link DAP-2695 rev. A1 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
8 years ago
dap-2695-a1)
ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:wan" "6@eth1"
;;
ar71xx: add support for MikroTik RB931-2nD This patch adds support for the MikroTik RB931-2nD (hAP mini): https://mikrotik.com/product/RB931-2nD Specifications: * SoC: Qualcomm QCA9533 (650MHz) * RAM: 32MiB * Storage: 16MiB SPI NOR flash * Ethernet: 3x100M * Wireless: QCA9533 built-in, dual-chain 802.11b/g/n Installation: 1. Setup a DHCP/BOOTP Server with the following parameters: * DHCP-Option 66 (TFTP server name): pointing to a local TFTP server within the same subnet of the DHCP range * DHCP-Option 67 (Bootfile-Name): matching the initramfs filename of the to be booted image. The usable intramfs files are: - openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf - openwrt-ar71xx-mikrotik-vmlinux-initramfs-lzma.elf - openwrt-ar71xx-mikrotik-rb-nor-flash-16M-initramfs-kernel.bin 2. Press the reset button on the board and keep that pressed. 3. Connect the board to your local network via its Internet port. 4. Release the button after the LEDs on the board are turned off. Now the board should load and start the initramfs image from the TFTP server. 5. Now connect the board via either of its LAN ports (2 or 3). 6. Upload the sysupgrade image to the board with scp: $ scp openwrt-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/fw.bin 7. Log in to the running system listening on 192.168.1.1 via ssh as root (without password): $ ssh root@192.168.1.1 8. Flash the uploaded firmware file from the ssh session via the sysupgrade command: root@OpenWrt:~# sysupgrade /tmp/fw.bin Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
6 years ago
rb-931-2nd)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:3" "2:lan:2" "3:wan:1"
;;
ar71xx: add support for RB-941-2nD Add full support for Mikrotik RB-941-2nD (hAP lite) Original patch by Sergey Sergeev <adron@yapic.net> and more information is available here: https://wiki.openwrt.org/toh/mikrotik/rb941_2nd I updated and adapted the patch to apply cleanly to LEDE trunk and added proper numbering for the switch ports (matching case labels). Tested working on actual hardware with the information provided in the above webpage. Sysupgrade works. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years ago
rb-941-2nd)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:wan:1"
;;
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
db120|\
ar71xx: add userspace support for Mikrotik RB2011iL Kernel/hardware support for this board has been implemented since Chaos Calmer. This set of patches is to get the board identified in userland. This will allow support for things like sysupgrade, configuring initial LED state, configuring initial switch state, etc. Signed-off-by: Ron Angeles <ronangeles@gmail.com>
7 years ago
rb-2011il|\
ar71xx: Add userspace support for Mikrotik rb-2011iLS Kernel support already present. Patch adds userspace for the 'iLS' suffix model of the RB2011 family. Enables correct initial switch settings, sysupgrade, etc. https://mikrotik.com/product/RB2011iLS-IN Signed-off-by: Simon Paterson <simon.paterson.nz@gmail.com>
6 years ago
rb-2011ils|\
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
rb-2011l|\
rb-2011uas|\
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
rb-2011uas-2hnd|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
rb-2011uias|\
ar71xx: add support for Mikrotik RouterBOARD 2011UiAS-2HnD r2 This board got a new hardware revision, without any change in functionality. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years ago
rb-2011uias-2hnd|\
rb-2011uias-2hnd-r2)
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
case "$board" in
ar71xx: Add userspace support for Mikrotik rb-2011iLS Kernel support already present. Patch adds userspace for the 'iLS' suffix model of the RB2011 family. Enables correct initial switch settings, sysupgrade, etc. https://mikrotik.com/product/RB2011iLS-IN Signed-off-by: Simon Paterson <simon.paterson.nz@gmail.com>
6 years ago
rb-2011ils|\
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
rb-2011uas*|\
rb-2011uias|\
ar71xx: add support for Mikrotik RouterBOARD 2011UiAS-2HnD r2 This board got a new hardware revision, without any change in functionality. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years ago
rb-2011uias-2hnd|\
rb-2011uias-2hnd-r2)
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" "6:sfp"
;;
*)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
esac
ucidef_add_switch "switch1" \
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan"
;;
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
dir-615-i1|\
omy-g1|\
r6100|\
smart-300|\
tl-wdr6500-v2|\
ar71xx: add support for TP-LINK TL-WR940N v4 Signed-off-by: David Lutz <kpanic@hirnduenger.de>
8 years ago
tl-wr940n-v4|\
ar71xx: add support for TP-Link TL-WR940N v6 Add support for TL-WR940N v6 board. It is pretty much the same as v5 except they only left WAN LED and removed other ones. Installation: flash factory image through WEB UI or use TFTP. Signed-off-by: Robert Marko <robimarko@gmail.com>
6 years ago
tl-wr940n-v6|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
tl-wr941nd-v6|\
wnr1000-v2|\
wnr2000-v4|\
wnr2200|\
wnr612-v2|\
wpn824n)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
ar71xx: fix vlan settings for some boards For AR71XX devices, GMAC1 always connects port 0 of the built-in switch, as the CPU port. This patch sets correct vlan for some devices with wrong settings: a) mark port 0 as CPU port, tagged b) reverse port order, marking these ports untagged Signed-off-by: Weijie Gao <hackpascal@gmail.com>
7 years ago
"0@eth1" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4"
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
;;
ar71xx: Add support for TP-Link MR6400 You can flash via tftp recovery (serve factory image as /mr6400_tp_recovery.bin on 192.168.0.66/24, connect to any ethernet port and power on device while holding the reset button). Flashing via OEM web interface does not work. Hardware Specification (v1.0 EU): - SoC: QCA9531 - Flash: Winbond W25Q64FV (8MiB) - RAM: EtronTech EM6AB160TSE-5G (64MiB) - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna) - Ethernet: 2NIC (3x100M + 1x100M) - WWAN: TP-LINK LTE MODULE (2x external detachable antenna) - Power: DC 12V 1A Signed-off-by: Filip Moc <lede@moc6.cz>
7 years ago
tl-mr6400)
ucidef_set_interfaces_lan_wan "eth0.1 eth1" "usb0"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan"
;;
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
dir-825-b1|\
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
nbg460n_550n_550nh|\
tew-673gru|\
wzr-hp-g300nh)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
;;
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
dlan-pro-1200-ac)
ucidef_set_interface_lan "eth0"
ucidef_add_switch "switch0" \
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
"0u@eth0" "2:lan" "3:lan" "4:lan"
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch_attr "switch0" "enable" "false"
;;
ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2 WHQX E1700AC v2 is based on Qualcomm QCA9563 + QCA9880 + QCA8334. Specification: - 750/400/250 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz (QCA9563) with external FEM (SKY85309-11) - 3T3R 5 GHz (QCA9880) with external FEM (SKY85728-11) - 2x 10/100/1000 Mbps Ethernet (one port with PoE support) - 1x miniPCIe slot (USB 2.0 bus only) - 1x microSIM slot - 1x USB 2.0 - 5x LED (4 driven by GPIO) - 1x button (reset) - 1x 2-pos switch - 1x DC jack for main power input (9-48 V) - UART (J5) and LEDs (J13) headers on PCB WHQX E600G is based on Qualcomm QCA9531. Specification: - 650/391/216 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (QCA9531) with external PA (LXK-6601) - 2x 10/100 Mbps Ethernet (one port with PoE support) - 1x miniPCIe slot (with PCIe and USB 2.0 buses) - 1x microSIM slot - 5x LED (4 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-48 V) - UART (J100), SIM (J34), JTAG (J5) and LEDs (J7) headers on PCB WHQX E600GAC is based on Qualcomm QCA9531 + QCA9887. Specification: - 650/391/216 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (QCA9531) - 1T1R 5 GHz (QCA9887) with external FEM (SKY85703-11) - 2x 10/100 Mbps Ethernet - 6x LED (1x RGB, 5 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-12 V) - UART (J100), USB (J102), JTAG (J5) and LEDs (J7) header on PCB Important notice: First version of these boards are using different mtd layout, with ART data at the end. You should not use v2 images on v1 board because it will result in lost of ART data! Flash instruction (using U-Boot CLI and tftp server): 1. Configure PC with static IP 192.168.1.10 and tftp server. 2. Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. 3. Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. 4. Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): 1. Configure PC with static IP 192.168.1.xxx(2-254)/24. 2. Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. 3. Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Signed-off-by: Peng Zhang <sd20@qxwlan.com> [reworked: image generation code, mach-* files, commit description, fixed minor code style issues, rebased on master] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
6 years ago
e1700ac-v2|\
ar71xx:add support for E750G v8 Qxwlan E750G v8 is based on Qualcomm QCA9344. Specification: - 560/450/225 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4G GHz (AR9344) - 2x 10/100 Mbps Ethernet (PoE support) - 2x 10/100/1000 Mbps Ethernet - 7x LED (6 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-48 V) - UART (J23) and LEDs (J2) headers on PCB Flash instruction (using U-Boot CLI and tftp server): - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. - Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. - Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): - Configure PC with static IP 192.168.1.xxx(2-254)/24. - Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. - Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Signed-off-by: 张鹏 <sd20@qxwlan.com>
6 years ago
e750g-v8|\
ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2 WHQX E1700AC v2 is based on Qualcomm QCA9563 + QCA9880 + QCA8334. Specification: - 750/400/250 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz (QCA9563) with external FEM (SKY85309-11) - 3T3R 5 GHz (QCA9880) with external FEM (SKY85728-11) - 2x 10/100/1000 Mbps Ethernet (one port with PoE support) - 1x miniPCIe slot (USB 2.0 bus only) - 1x microSIM slot - 1x USB 2.0 - 5x LED (4 driven by GPIO) - 1x button (reset) - 1x 2-pos switch - 1x DC jack for main power input (9-48 V) - UART (J5) and LEDs (J13) headers on PCB WHQX E600G is based on Qualcomm QCA9531. Specification: - 650/391/216 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (QCA9531) with external PA (LXK-6601) - 2x 10/100 Mbps Ethernet (one port with PoE support) - 1x miniPCIe slot (with PCIe and USB 2.0 buses) - 1x microSIM slot - 5x LED (4 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-48 V) - UART (J100), SIM (J34), JTAG (J5) and LEDs (J7) headers on PCB WHQX E600GAC is based on Qualcomm QCA9531 + QCA9887. Specification: - 650/391/216 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (QCA9531) - 1T1R 5 GHz (QCA9887) with external FEM (SKY85703-11) - 2x 10/100 Mbps Ethernet - 6x LED (1x RGB, 5 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-12 V) - UART (J100), USB (J102), JTAG (J5) and LEDs (J7) header on PCB Important notice: First version of these boards are using different mtd layout, with ART data at the end. You should not use v2 images on v1 board because it will result in lost of ART data! Flash instruction (using U-Boot CLI and tftp server): 1. Configure PC with static IP 192.168.1.10 and tftp server. 2. Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. 3. Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. 4. Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): 1. Configure PC with static IP 192.168.1.xxx(2-254)/24. 2. Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. 3. Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Signed-off-by: Peng Zhang <sd20@qxwlan.com> [reworked: image generation code, mach-* files, commit description, fixed minor code style issues, rebased on master] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
6 years ago
unifiac-pro|\
xd3200)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:wan"
;;
ar71xx:add support for E558 v2 Qxwlan E558 v2 is based on Qualcomm QCA9558 + AR8327. Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (QCA9558) - 3x 10/100/1000 Mbps Ethernet (one port with PoE support) - 4x miniPCIe slot (USB 2.0 bus only) - 1x microSIM slot - 5x LED (4 driven by GPIO) - 1x button (reset) - 1x 3-pos switch - 1x DC jack for main power input (9-48 V) - UART (JP5) and LEDs (J8) headers on PCB Flash instruction (using U-Boot CLI and tftp server): - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. - Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. - Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): - Configure PC with static IP 192.168.1.xxx(2-254)/24. - Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. - Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Signed-off-by: 张鹏 <sd20@qxwlan.com>
6 years ago
e558-v2)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
ucidef_add_switch "switch0" \
"0@eth1" "4:lan" "5:lan" "6@eth0" "3:wan"
;;
ar71xx: Add support for D-Link EBR-2310 Rev. C Add support for the EBR-2310, which is almost identical to the DIR-615 rev E4, without the wifi. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
7 years ago
ebr-2310-c1)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4"
;;
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
el-m150)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "3@eth1"
;;
ar71xx: add userspace support for D-Link DIR-869 A1, generate images Signed-off-by: Florian Beier <beier.florian@gmail.com> [Matthias Schiffer: fix factory image, improve commit message] Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
8 years ago
dir-869-a1|\
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
epg5000|\
ar71xx: add support for TP-LINK WR1043ND v4 Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
8 years ago
esr1750|\
ar71xx: WNDR4300: Fix network vlan IDs The Netgear WNDR4300 has the VLAN IDs flipped in LuCi, fix it. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
7 years ago
tl-wr1043nd-v4|\
ar71xx: fix Netgear WNDR3700 v4 switch port mapping Signed-off-by: Qian Zheng <sotux82@gmail.com>
7 years ago
wndr3700v4|\
ar71xx: WNDR4300: Fix network vlan IDs The Netgear WNDR4300 has the VLAN IDs flipped in LuCi, fix it. Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
7 years ago
wndr4300)
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
ar71xx: add ew-balin platform from Embedded Wireless Add the Embedded Wireless "Balin" platform SoC: QCA AR9344 or AR9350 RAM: DDR2-RAM 64MBytes Flash: SPI-NOR 16MBytes WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n Ethernet: 3 x 10/100 Mb/s USB: 1 x USB2.0 Host/Device bootstrap-pin at power-up PCI-Express: 1 x lane PCIe 1.2 UART: 1 x Normal, 1 x High-Speed JTAG: 1 x EJTAG GPIO: 10 x Input/Output multiplexed The module comes already with the current vanilla OpenWrt firmware. To update, use "sysupgrade" image directly in vendor firmware. Signed-off-by: Catrinel Catrinescu <cc@80211.de>
6 years ago
ew-balin)
ar71xx: fix bad "proto" references in default network configuration This change was originally meant to go along with the ucidef_set_interface() fixup. Fixes: 7e664b7c2d ("base-files: fix ucidef_set_interface() protocol selection") Fixes: 85048a9c1f ("base-files: rework _ucidef_set_interface to be more generic") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
6 years ago
ucidef_set_interface "usb2" ifname "usb0" protocol "static"
ar71xx: add ew-balin platform from Embedded Wireless Add the Embedded Wireless "Balin" platform SoC: QCA AR9344 or AR9350 RAM: DDR2-RAM 64MBytes Flash: SPI-NOR 16MBytes WLAN: 2 x 2 MIMO 2.4 & 5 GHz IEEE802.11 a/b/g/n Ethernet: 3 x 10/100 Mb/s USB: 1 x USB2.0 Host/Device bootstrap-pin at power-up PCI-Express: 1 x lane PCIe 1.2 UART: 1 x Normal, 1 x High-Speed JTAG: 1 x EJTAG GPIO: 10 x Input/Output multiplexed The module comes already with the current vanilla OpenWrt firmware. To update, use "sysupgrade" image directly in vendor firmware. Signed-off-by: Catrinel Catrinescu <cc@80211.de>
6 years ago
ucidef_add_switch "switch0" \
"0@eth0" "5:lan:4" "4:lan:5" "3:wan"
;;
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ew-dorin)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:wan"
;;
ew-dorin-router)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan"
;;
ar71xx: Add support to DomyWifi DW33D Signed-off-by: Jing Lin <mumuqz@163.com>
8 years ago
dw33d|\
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
f9k1115v2)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
"2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "0@eth0" "1:wan"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
;;
ar71xx: fix netgear wnr2000 v3 switch port mapping Signed-off-by: Qian Zheng <sotux82@gmail.com> [Jo-Philipp Wich: fix alphabetical order after merging with gl-ar300 case] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
gl-ar300|\
wnr2000-v3)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
;;
ar71xx: add support for GL.iNet GL-AR750 GL.iNet GL-AR750 is a small size, dual-band (AC750) router, based on Qualcomm/Atheros QCA9531 v2 + QCA9887. FCC ID: 2AFIW-AR750. Specification: - 650/597/216 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3x 10/100 Mbps Ethernet - 2T2R 2.4 GHz (QCA9531) - 1T1R 5 GHz (QCA9887) - 1x USB 2.0 (power controlled by GPIO) - 1x microSD (GL857L) - 3x LED (all driven by GPIO) - 1x button (reset) - 1x 2-pos switch - header for optional PoE module - 1x micro USB for main power input - UART + I2C header on PCB Flash instruction: Vendor firmware is based on OpenWrt/LEDE. GUI or sysupgrade can be used to flash OpenWrt/LEDE firmware. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
gl-ar750|\
rb-435g)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan" "2:lan"
;;
ar71xx: add support for GL.iNet GL-AR750S This patch adds supports for GL-AR750S. Specification: - SOC: QCA9563 (775MHz) - Flash: 16 MiB (W25Q128FVSG) - RAM: 128 MiB DDR2 - Ethernet: 2x 1Gbps LAN + 1x 1Gbps WAN - Wireless: 2.4GHz (bgn) and 5GHz (ac) - USB: 1x USB 2.0 port - Button: 1x switch button, 1x reset button - LED: 3x LEDS (green) Flash instruction: Apply factory image via web-gui. Signed-off-by: Luo chongjun <luochongjun@gl-inet.com>
6 years ago
gl-ar750s)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:2" "3:lan:1" "1:wan"
;;
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
jwap230)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "5:wan" "6@eth1"
;;
nanostation-m-xw)
ucidef_add_switch "switch0" \
"0@eth0" "5:lan" "1:wan"
;;
onion-omega)
ucidef_set_interface_lan "wlan0"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
;;
rb-450)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
ar71xx: Fix switch config on Mikrotik RB450/G This patch fixes the ethernet switch initial config for Mikrotik RB450 and RB450G. The previous version wrongly changed the RouterStation Pro config. This one creates a specific config for the RB450G and leaves the RouterStation Pro unchanged. Signed-off-by: João Chaínho <joaochainho@gmail.com>
8 years ago
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth1"
;;
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
routerstation-pro)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
"0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
;;
rb-493g)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth0.1 eth1.1" "eth1.2"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
ar71xx: Fix switch port numbering on MIkrotik RB951Ui-2nD and RB493G This patch fixes the switch port numbering on Mikrotik RB951Ui-2nD (hAP). Also fixes the switch port numbering shown on LuCI for Mikrotik RB493G. Signed-off-by: João Chaínho <joaochainho@gmail.com>
7 years ago
"0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch1" \
ar71xx: Fix switch port numbering on MIkrotik RB951Ui-2nD and RB493G This patch fixes the switch port numbering on Mikrotik RB951Ui-2nD (hAP). Also fixes the switch port numbering shown on LuCI for Mikrotik RB493G. Signed-off-by: João Chaínho <joaochainho@gmail.com>
7 years ago
"0@eth1" "1:lan:4" "2:lan:1" "3:lan:3" "4:lan:2" "5:wan"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
;;
ar71xx: add support for Teltonika RUT900 Teltonika RUT900 is an industrial 3G router based on Atheros AR9344. There are available 3 other models in RUT9xx series: RUT905, RUT950 and RUT955, which differ in availability of additional I/O ports, built-in GSM modem type, GPS antenna and other features. FCC ID of the RUT950 model (LTE module built-in): 2AET4-RUT950. This patch adds support for the RUT900 model only but can be easily extended to cover whole series. Also, as there are several different 3/4G modules (Huawei, Quectel, Telit) used in whole series, packages required for WWAN support are not included by default. It is up to the user to install required software for built-in modem. Specification: - 550/400/200 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1 - 2T2R 2,4 GHz (AR9344), with ext. PA (MGA-22103) and LNA - built-in 3G module (example: Telit HE910-D) - 2x miniSIM slot - 2x RP-SMA/F (Wi-Fi), 2x SMA/F (3G) - PCA9539 16-bit GPIO I2C expander - 12x LED (4 are driven by AR9344, 7 by PCA9539) - 1x button (reset) - DC jack for main power input (9-30 V) - UART available on PCB edge connector Serial console pinout: - RX: pin1 (square) on top side of the main PCB (AR9344 is on top) - TX: pin1 (square) on bottom side Flash instruction: Vendor firmware is based on OpenWrt CC release. Use the "factory" image directly in GUI (make sure to uncheck "keep settings") or in U-Boot web based recovery. To avoid any problems, make sure to first update vendor firmware to latest version - "factory" image was successfully tested on device running "RUT9XX_R_00.03.960" firmware and U-Boot "3.0.1". Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
rut900)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
;;
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
tellstick-znet-lite)
ucidef_set_interface_wan "eth0"
ar71xx: fix bad "proto" references in default network configuration This change was originally meant to go along with the ucidef_set_interface() fixup. Fixes: 7e664b7c2d ("base-files: fix ucidef_set_interface() protocol selection") Fixes: 85048a9c1f ("base-files: rework _ucidef_set_interface to be more generic") Signed-off-by: Jo-Philipp Wich <jo@mein.io>
6 years ago
ucidef_set_interface "wlan" ifname "wlan0" protocol "dhcp"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
;;
ar71xx: fix switch port mapping for ap123 based TP-Link devices This fixes switch port mapping for: TL-WR841N/ND v8, TL-MR3420 v2 and TL-WR941N/ND v5. All of them share the same Atheros ap123 reference design. The order of switch ports (shown in "swconfig dev eth1 show") is CPU, LAN 4, LAN 1, LAN 2, LAN 3. Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com> [included 2 more devices] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
tl-mr3420-v2|\
tl-wr841n-v8|\
tl-wr842n-v2|\
ar71xx: add support for TP-Link TL-WR942N v1 TP-Link TL-WR942N v1 is a 2.4 GHz single-band N450 router, based on Qualcomm/Atheros QCA9561. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x USB 2.0 - 11x LED (most are controlled by 74HC595) - 2x button - UART header on PCB* * Serial console is disabled in OEM non-beta firmwares and corresponding GPIO pins 14 and 15 are assigned to control USB1 and USB2 LEDs by production (non-beta) U-Boot and firmware. Currently not working: 1. USB1 and USB2 LEDs if UART RX and TX pins are assigned to their GPIOs by some U-Boot versions. Flash instruction under vendor GUI: 1. Download "lede-ar71xx-generic-tl-wr942n-v1-squashfs-factory.bin". 2. Go to WEB interface and perform usual firmware upgrade. FLash instruction under U-Boot recovery mode (doesn't work in beta firmware): 1. Setup PC with static IP "192.168.0.66/24" and tftp server. 2. Change "*-factory" image filename to "WR942v1_recovery.bin" and make it available to download from your tftp server. 3. Press "reset" button and power up the router, wait till "WPS" LED turns on. Flash instruction under U-Boot, using UART (can be done only with preinstalled UART-enabled U-Boot version!): 1. Use "tpl" to stop autobooting and obtain U-Boot CLI access. 2. Setup ip addresses for U-Boot and your tftp server. 3. Issue below commands: tftp 0x81000000 lede-ar71xx-generic-tl-wr942n-v1-sysupgrade.bin erase 0x9f020000 +$filesize cp.b 0x81000000 0x9f020000 $filesize reset Signed-off-by: Serg Studzinskii <serguzhg@gmail.com> [minor code style fixes, extended commit message] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
tl-wr941nd-v5|\
tl-wr942n-v1)
ar71xx: fix switch port mapping for ap123 based TP-Link devices This fixes switch port mapping for: TL-WR841N/ND v8, TL-MR3420 v2 and TL-WR941N/ND v5. All of them share the same Atheros ap123 reference design. The order of switch ports (shown in "swconfig dev eth1 show") is CPU, LAN 4, LAN 1, LAN 2, LAN 3. Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com> [included 2 more devices] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
;;
ar71xx: add support for TP-LINK Archer C7 v4 TP-Link Archer C7 v4 is a dual-band AC1750 router, based on Qualcomm/Atheros QCA9561+QCA9888. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction: 1. Upload lede-ar71xx-generic-archer-c7-v4-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c7-v4-squashfs-factory.bin and rename it to ArcherC7v4_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f040000 +$filesize 3. cp.b $fileaddr 0x9f040000 $filesize 4. reset Signed-off-by: Felix Fietkau <nbd@nbd.name>
7 years ago
archer-c7-v4|\
ar71xx: add support for TP-LINK Archer C7 v5 TP-Link Archer C7 v5 is a dual-band AC1750 router, based on Qualcomm/Atheros QCA9563+QCA9880. Specification: - 750/400/250 MHz (CPU/DDR/AHB - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 10x LED, 2x button - UART header on PCB Flash instruction: 1. Upload lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c7-v5-squashfs-factory.bin and rename it to ArcherC7v5_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Signed-off-by: Arvid E. Picciani <aep@exys.org>
6 years ago
archer-c7-v5|\
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
tl-wdr4300|\
tl-wr1041n-v2)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
;;
ar71xx: wpa8630: change board name to tl-wpa8630 Signed-off-by: Henryk Heisig <hyniu@o2.pl>
8 years ago
tl-wpa8630)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
;;
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
tl-wr1043nd)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
;;
tl-wr2543n)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
;;
ar71xx: fix TL-MR3220-v2 switch port order Fix the switch port order for proper display on high level interfaces. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
5 years ago
tl-mr3220-v2|\
ar71xx: fix TL-WR741ND-v4 switch port order Fix the switch port order for proper display on high level interfaces. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
5 years ago
tl-wr741nd-v4)
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
;;
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
tl-wr841n-v1|\
tl-wr941nd)
base-files: rework _ucidef_set_interface to be more generic This is a rework of previously submitted patch reworking ucidef_set_interface_raw [1]. Here, keep the idea but instead make _ucidef_set_interface more generic and use it instead of ucidef_set_interface_raw. Also change the users like ucidef_set_interface_lan and others. [1] https://patchwork.ozlabs.org/patch/844961/ Signed-off-by: Roman Yeryomin <roman@advem.lv>
6 years ago
ucidef_set_interface "eth" ifname "eth0"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
ar71xx: fix switch port mapping for TP-Link TL-WR74xN/D series Fixes FS#843 Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
tl-wr741nd|\
ar71xx: fix tl-wr841n-v7 switch port mapping Signed-off-by: Qian Zheng <sotux82@gmail.com> [Jo-Philipp Wich: fix alphabetical order] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
tl-wr841n-v7)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ar71xx: fix tl-wr841n-v7 switch port mapping Signed-off-by: Qian Zheng <sotux82@gmail.com> [Jo-Philipp Wich: fix alphabetical order] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4"
;;
ar71xx: base-files: cleanups in etc/board.d/02_network This includes: - code style fixes - removal of huge comment (it should be in doc, not here) and some small ones - removal of redundant config for DR531/WPJ531 as the default is the same - merge of boards with exactly the same interfaces config Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
uap-pro|\
wpj342)
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:wan"
;;
ar71xx: fix netgear wndr3700 v1/v2, wndr3800/wndr3800ch switch port mapping Signed-off-by: Qian Zheng <sotux82@gmail.com>
7 years ago
wndr3700|\
wndr3700v2|\
wndr3800|\
wndr3800ch)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
ar71xx: fix netgear wndr3700 v1/v2, wndr3800/wndr3800ch switch port mapping Signed-off-by: Qian Zheng <sotux82@gmail.com>
7 years ago
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0"
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch_attr "switch0" "blinkrate" 2
ucidef_add_switch_port_attr "switch0" 1 led 6
ucidef_add_switch_port_attr "switch0" 2 led 9
ucidef_add_switch_port_attr "switch0" 5 led 2
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
;;
wpj344)
ucidef_add_switch "switch0" \
"0@eth0" "3:lan" "2:wan"
;;
wpj558)
ucidef_add_switch "switch0" \
"5:lan" "1:wan" "6@eth0"
;;
ar71xx: Compex WPJ563 support Specification: - SoC: Qualcomm Atheros QCA9563 (775 MHz, MIPS 74Kc) - RAM: 128 MiB - Storage: 16MB NOR flash - Wireless: Built into QCA9563 (Dragonfly), PHY modes b/g/n, 3x3 MIMO - Ethernet: 2x1G Tested and working: - ethernet / switch / lan / wan - 2.4GHz SoC wifi - PCIe - leds - buzzer Ramload: - tftpboot 0x84000000 lede-ar71xx-generic-wpj563-16M-initramfs-uImage.bin - bootm 0x84000000 Install: - tftpboot 0x80500000 lede-ar71xx-generic-wpj563-16M-squashfs-sysupgrade.bin - erase 0x9f030000 +$filesize - erase 0x9f680000 +1 - cp.b $fileaddr 0x9f030000 $filesize Erasing 0x9f680000 is required because uboot defines "bootcmd=bootm 0x9f680000 || bootm 0x9f030000", so it first tries to boot the higher address. I think the 16 mb flash are intended to be used as 8+8mb for a fallback image. In my hardware only the lower address has a bootable image. But to make sure future hardware will boot lede too, I erase one block, so uboot will skip this address. Signed-off-by: Christian Mehlis <christian@m3hlis.de>
7 years ago
wpj563)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:wan"
;;
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
wrt160nl)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
ar71xx: base-files: fix boards order in etc/board.d/02_network Keep everything in alphabetical order. Boards are ordered in two steps, first within/inside common configuration (case section), then sections, globally. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth0"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
;;
wzr-hp-g450h)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:1 3:lan:2 4:lan:3 5:lan:4" "1:wan"
;;
z1)
ar71xx/ipq806x/mediatek/mvebu: fix network defaults After "73d923e base-files: emit tagged switch configuration by default" some default network configurations are broken because the lan and wan ifnames are forcibly set to untagged netdevs. Adjust the offending set_interfaces_lan_wan() calls to use the proper tagged device names. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years ago
ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:wan"
;;
ar71xx: ens202ext: Fix VLAN switch The target ENS202EXT was just recently added right before the stable release of Openwrt 18. It flashes fine, but the physical switch is almost impossible to use until you have a VLAN set up. Tested on two devices. The actual problem is that eth0 represents nothing for whatever reason. In other words, both WAN and LAN are running from eth1. There may be an underlying problem in the build, but for now, I assume that this is correct and that a VLAN switch is an appropriate fix. Also, it's virtually impossible to get the switch running right through LuCI. It is one thing to get a switch to appear, but attempting to configure it breaks the whole thing. The VLAN has to be set up perfectly, otherwise, interfaces will not start up, and one is forced to reset settings, OR, the new LuCI feature kicks in and reverses any steps. It is extremely difficult to determine which virtual ports correspond to which physical ethernet ports without being able to set up the switch in LuCI. Temporary Workaround: followed directions here [openwrt/luci#867](https://github.com/openwrt/luci/issues/867) Reviewed-by: Marty Plummer <hanetzer@startmail.com> Signed-off-by: Michael Pratt <mpratt51@gmail.com> [commit author fix, subject fix, message text wrap] Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years ago
ens202ext)
ar71xx: ens202ext: Fix whitespace issues I've missed leading whitespace issues in the original patch, so fixing it in this commit. Thanks to pepe2k for letting me know. Fixes: d260813d ("ar71xx: ens202ext: Fix VLAN switch") Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years ago
ucidef_set_interfaces_lan_wan "eth1.1" "eth1.2"
ucidef_add_switch "switch0" \
"0@eth1" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
;;
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
esac
}
ar71xx_setup_macs()
{
local board="$1"
local lan_mac=""
local wan_mac=""
case $board in
ar71xx: use correct wan mac address for the TP-Link Archer C7 v4 The correct MAC address for this device is lan_mac +1, there is no need to set lan_mac so use base_mac variable instead lan_mac. Based on this PR for ath79: https://github.com/openwrt/openwrt/pull/1726 Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com> [fix alphabetical ordering, reword subject] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
5 years ago
archer-c7-v4)
base_mac=$(mtd_get_mac_binary config 8)
wan_mac=$(macaddr_add "$base_mac" 1)
;;
ar71xx: Correct MAC address for WAN interface of Archer C7 v5 This device shares the network config with v4, thus the WAN MAC also needs to be fixed the same way. However, the partition where the MAC address resides has been changed. Based on: https://github.com/openwrt/openwrt/pull/1726 Tested-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years ago
archer-c7-v5)
base_mac=$(mtd_get_mac_binary info 8)
wan_mac=$(macaddr_add "$base_mac" 1)
;;
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
dgl-5500-a1|\
dir-825-c1)
wan_mac=$(mtd_get_mac_ascii nvram "wan_mac")
;;
dhp-1565-a1|\
dir-835-a1|\
wndr3700v4|\
wndr4300)
lan_mac=$(mtd_get_mac_binary caldata 0)
wan_mac=$(mtd_get_mac_binary caldata 6)
;;
ar71xx: use correct wan mac address for the TP-Link Archer C7 v4 The correct MAC address for this device is lan_mac +1, there is no need to set lan_mac so use base_mac variable instead lan_mac. Based on this PR for ath79: https://github.com/openwrt/openwrt/pull/1726 Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com> [fix alphabetical ordering, reword subject] Signed-off-by: Jo-Philipp Wich <jo@mein.io>
5 years ago
dir-869-a1|\
mynet-n750)
wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
;;
esr900)
wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
;;
ar71xx: add AVM FRITZ!WLAN Repeater 300E support Specifications: * SoC: AR7242 (Virian 400MHz) * RAM: 64 MB DDR (W9751G6JB-25) * Flash: 16MB SPI flash (S25FL129PIF) * WiFi: AR9382 (2.4/5GHz) + 2x SE2595L * LAN: 1x1000M (PEF7071V) To install LEDE via EVA bootloader, a FTP connection need to be established to 192.168.178.1 within the first seconds after power on: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put lede-ar71xx-generic-fritz300e-squashfs-sysupgrade.bin mtd1 Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years ago
fritz300e)
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
;;
ar71xx: fix MAC address setup for TL-WDR4300 board The current ethernet MAC address setup of TL-WDR4300 board is different from the setup of stock firmware: OpenWrt: lan = label_mac -2, wan = label_mac -2 stock: lan = label_mac, wan = label_mac +1 This patch applies to all devices using TL-WDR4300 board: TL-WDR3600 v1 TL-WDR4300 v1 TL-WDR4300 v1 (IL) TL-WDR4310 v1 Mercury MW4530R v1 Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit 9b02d32e34df2bb8821ec6f08f525bee22d0d1ba)
4 years ago
tl-wdr4300)
base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
wan_mac=$(macaddr_add "$base_mac" 1)
;;
ar71xx: add support for TP-Link TL-WR1043N v5 TP-Link TL-WR1043N v5 appears to be identical to the TL-WR1043ND v4, except that the USB port has been removed and there is no longer a removable antenna option. The software is more in line with the Archer series in that it uses a nested bootloader scheme. Specifications: - QCA9563 at 775 MHz - 64 MB RAM - 16 MB flash - 3 (non-detachable) Antennas / 450 Mbit - 1x/4x WAN/LAN Gbps Ethernet (QCA8337) - reset and Wi-Fi buttons Signed-off-by: Tim Thorpe <tim@tfthorpe.net> Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
7 years ago
tl-wr1043n-v5|\
ar71xx: add support for TP-LINK WR1043ND v4 Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
8 years ago
tl-wr1043nd-v4)
ar71xx: fix MAC addresses on TP-Link TL-WR1043ND v4 The addresses were read from the 'config' partition, which would not always contain the addresses at the same offsets, depending on the stock firmware version used before flashing LEDE. Change this to get the addresses from the 'product-info' partition, which is read-only. Reported-and-tested-by: Andreas Ziegler <ml@andreas-ziegler.de> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
7 years ago
lan_mac=$(mtd_get_mac_binary product-info 8)
wan_mac=$(macaddr_add "$lan_mac" 1)
ar71xx: add support for TP-LINK WR1043ND v4 Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
8 years ago
;;
ar71xx: fix Sitecom WLR-8100 support This patch fixes Sitecom WLR-8100: - mtd layout - LAN and WAN MAC address setup - 2.4 GHz Wi-Fi MAC address setup - 5 GHz Wi-Fi support (calibration data, MAC address setup, missing ath10k-* packages) Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com> [squashed commits, fixed whitespace issues, reworded commit message] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
7 years ago
wlr8100)
lan_mac=$(mtd_get_mac_ascii u-boot-env "ethaddr")
wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
;;
ar71xx: wpj558: remove unused eth1 device and fix MAC address Signed-off-by: Enrique Giraldo <enrique.giraldo@galgus.net>
7 years ago
wpj344|\
wpj558)
ar71xx: wpj344: set MAC on wan Signed-off-by: Leon M. George <leon@georgemail.eu>
7 years ago
wan_mac=$(mtd_get_mac_binary u-boot 0x2e018)
;;
ar71xx: create a separated network interface for the RB2011UAS SFP port Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 36800
11 years ago
esac
ar71xx: switch network and led defaults to board detection framework Also translate ucidef_add_switch_vlan() to ucidef_add_switch_ports() for better switch topology mapping and improved default config generation. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47663
9 years ago
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
}
ar71xx: create generic network config from an uci-defaults script SVN-Revision: 28817
13 years ago
ar71xx: set mib-poll-interval on devices with ar8xxx switch Commit "generic: ar8216: add mib_poll_interval switch attribute" sets mib-poll-interval as disabled by default (was set to 2s), so it makes switch LEDs trigger disfunctional on devices which don't have mib-poll-interval set. So this patch sets mib-poll-interval to 500ms on devices which are using ar8xxx switch LEDs trigger, as the same value was set for built in switches in 443fc9ac35 ("ath79: use ar8216 for builtin switch"). Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
5 years ago
ar71xx_setup_ar8xxx_switch()
{
local board="$1"
case $board in
ap147-010|\
archer-c25-v1|\
archer-c58-v1|\
archer-c59-v1|\
archer-c59-v2|\
archer-c60-v1|\
archer-c60-v2|\
archer-c7-v4|\
archer-c7-v5|\
cf-e375ac|\
cf-e385ac|\
cr3000|\
dhp-1565-a1|\
mynet-n600|\
rb-2011il|\
rb-2011ils|\
rb-2011l|\
rb-2011uas|\
rb-2011uas-2hnd|\
rb-2011uias|\
rb-2011uias-2hnd|\
rb-2011uias-2hnd-r2|\
rb-750|\
rb-750p-pbr2|\
rb-750-r2|\
rb-750up-r2|\
rb-951ui-2nd|\
rb-952ui-5ac2nd|\
rb-map-2nd|\
tl-wr1043nd-v4|\
tl-wr1043n-v5|\
wndr3700v4|\
wndr3700v4|\
wndr4300|\
wnr1000-v2|\
wnr2000-v3|\
wnr2200|\
wnr612-v2|\
wpn824n)
ucidef_set_ar8xxx_switch_mib "switch0" 0 500
;;
esac
}
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
board_config_update
treewide: use the generic board_name function Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years ago
board=$(board_name)
ar71xx: base-files: rework etc/board.d/02_network Convert etc/board.d/02_network in ar71xx target to the same shape as we have in ramips target. Split code into two new functions: - interface/s setup in ar71xx_setup_interfaces() - MAC/s setup in ar71xx_setup_macs() Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years ago
ar71xx_setup_interfaces $board
ar71xx_setup_macs $board
ar71xx: set mib-poll-interval on devices with ar8xxx switch Commit "generic: ar8216: add mib_poll_interval switch attribute" sets mib-poll-interval as disabled by default (was set to 2s), so it makes switch LEDs trigger disfunctional on devices which don't have mib-poll-interval set. So this patch sets mib-poll-interval to 500ms on devices which are using ar8xxx switch LEDs trigger, as the same value was set for built in switches in 443fc9ac35 ("ath79: use ar8216 for builtin switch"). Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
5 years ago
ar71xx_setup_ar8xxx_switch $board
ar71xx: switch network and led defaults to board detection framework Also translate ucidef_add_switch_vlan() to ucidef_add_switch_ports() for better switch topology mapping and improved default config generation. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47663
9 years ago
board_config_flush
ar71xx: create generic network config from an uci-defaults script SVN-Revision: 28817
13 years ago
exit 0