dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ar71xx: add support for TP-Link Archer C58 v1

Browse Source 
TP-Link Archer C58 v1 is a dual-band AC1350 router, based on Qualcomm
QCA9561 + QCA9886. It looks like Archer C59 v1 without USB port.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 6x LED, 3x button
- UART header on PCB, RX, TX at TP4+5 (backside)

QCA9886 wlan needs pre_cal_data file and enable ieee80211 phy hotplug to
patch macaddress.

Flash instruction:

Use "factory" image directly in vendor GUI.

Recovery method:

1. Set PC to fixed ip address 192.168.0.66/24.
2. Download "lede-ar71xx-generic-archer-c58-v1-squashfs-factory.bin" and
   rename it to "tp_recovery.bin".
3. Start a tftp server with the file "tp_recovery.bin" in its root
   directory.
4. Turn off the router.
5. Press and hold Reset button.
6. Turn on router with the reset button pressed and wait ~15 seconds.
7. Release the reset button and after a short time the firmware should
   be transferred from the tftp server.
8. Wait ~30 second to complete recovery.

Flash instruction under U-Boot, using UART:

tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
erase 0x9f020000 +$filesize
cp.b $fileaddr 0x9f020000 $filesize
reset

This commit is based on GitHub PR#1112

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
v19.07.3_mercusys_ac12_duma
Henryk Heisig 7 years ago committed by Piotr Dymacz
parent 01280bc8dc
commit b05c7193fd
16 changed files with 155 additions and 7 deletions
Show Stats Download Patch File Download Diff File

1
target/linux/ar71xx/base-files/etc/board.d/01_leds
Unescape Escape View File

@ -63,6 +63,7 @@ archer-c25-v1)
ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
;;
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1)
ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"

1
target/linux/ar71xx/base-files/etc/board.d/02_network
Unescape Escape View File

@ -217,6 +217,7 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
archer-c58-v1|\
archer-c59-v1|\
rb-450g)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"

1
target/linux/ar71xx/base-files/etc/diag.sh
Unescape Escape View File

@ -52,6 +52,7 @@ get_status_led() {
status_led="ap135:green:status"
;;
archer-c25-v1|\
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
fritz300e|\

7
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
Unescape Escape View File

@ -134,6 +134,13 @@ case "$FIRMWARE" in
;;
esac
;;
"ath10k/pre-cal-pci-0000:00:00.0.bin")
case $board in
archer-c58-v1)
ath10kcal_extract "art" 20480 12064
;;
esac
;;
*)
exit 1
;;

21
target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
Unescape Escape View File

@ -0,0 +1,21 @@
#!/bin/ash
[ "$ACTION" == "add" ] || exit 0
PHYNBR=${DEVPATH##*/phy}
[ -n $PHYNBR ] || exit 0
. /lib/ar71xx.sh
. /lib/functions/system.sh
board=$(ar71xx_board_name)
case "$board" in
archer-c58-v1)
echo $(macaddr_add $(mtd_get_mac_binary mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
;;
*)
;;
esac

3
target/linux/ar71xx/base-files/lib/ar71xx.sh
Unescape Escape View File

@ -449,6 +449,9 @@ ar71xx_board_detect() {
*"Archer C5")
name="archer-c5"
;;
*"Archer C58 v1")
name="archer-c58-v1"
;;
*"Archer C59 v1")
name="archer-c59-v1"
;;

1
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
Unescape Escape View File

@ -207,6 +207,7 @@ platform_check_image() {
ap531b0|\
ap90q|\
archer-c25-v1|\
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
bullet-m|\

1
target/linux/ar71xx/config-4.4
Unescape Escape View File

@ -52,6 +52,7 @@ CONFIG_ATH79_MACH_AP531B0=y
CONFIG_ATH79_MACH_AP90Q=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C25_V1=y
CONFIG_ATH79_MACH_ARCHER_C58_V1=y
CONFIG_ATH79_MACH_ARCHER_C59_V1=y
CONFIG_ATH79_MACH_ARCHER_C60_V1=y
CONFIG_ATH79_MACH_ARCHER_C7=y

10
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
Unescape Escape View File

@ -1328,6 +1328,16 @@ config ATH79_MACH_ARCHER_C25_V1
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
config ATH79_MACH_ARCHER_C58_V1
bool "TP-LINK Archer C58 v1 support"
select SOC_QCA956X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
config ATH79_MACH_ARCHER_C59_V1
bool "TP-LINK Archer C59 v1 support"
select SOC_QCA956X

1
target/linux/ar71xx/files/arch/mips/ath79/Makefile
Unescape Escape View File

@ -57,6 +57,7 @@ obj-$(CONFIG_ATH79_MACH_AP531B0) += mach-ap531b0.o
obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C58_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o

64
target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
Unescape Escape View File

@ -1,7 +1,7 @@
/*
* TP-Link Archer C59 v1 board support
* TP-Link Archer C58/C59 v1 board support
*
* Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
* Copyright (C) 2017 Henryk Heisig <hyniu@o2.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@ -65,6 +65,44 @@
#define ARCHER_C59_V1_WMAC_CALDATA_OFFSET 0x1000
#define ARCHER_C59_V1_PCI_CALDATA_OFFSET 0x5000
static struct gpio_led archer_c58_v1_leds_gpio[] __initdata = {
{
.name = "archer-c58-v1:green:power",
.gpio = ARCHER_C59_74HC_GPIO_LED_POWER,
.active_low = 1,
},
{
.name = "archer-c58-v1:green:wlan2g",
.gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2,
.active_low = 1,
},
{
.name = "archer-c58-v1:green:wlan5g",
.gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5,
.active_low = 1,
},
{
.name = "archer-c58-v1:green:lan",
.gpio = ARCHER_C59_74HC_GPIO_LED_LAN,
.active_low = 1,
},
{
.name = "archer-c58-v1:green:wan",
.gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
.active_low = 1,
},
{
.name = "archer-c58-v1:amber:wan",
.gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
.active_low = 1,
},
{
.name = "archer-c58-v1:green:wps",
.gpio = ARCHER_C59_74HC_GPIO_LED_WPS,
.active_low = 1,
},
};
static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = {
{
.name = "archer-c59-v1:green:power",
@ -177,7 +215,7 @@ static struct spi_board_info archer_c59_v1_spi_info[] = {
},
};
static void __init archer_c59_v1_setup(void)
static void __init archer_c5x_v1_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
@ -187,9 +225,6 @@ static void __init archer_c59_v1_setup(void)
ARRAY_SIZE(archer_c59_v1_spi_info));
platform_device_register(&archer_c59_v1_spi_device);
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
archer_c59_v1_leds_gpio);
ath79_register_gpio_keys_polled(-1, ARCHER_C59_V1_KEYS_POLL_INTERVAL,
ARRAY_SIZE(archer_c59_v1_gpio_keys),
archer_c59_v1_gpio_keys);
@ -233,5 +268,22 @@ static void __init archer_c59_v1_setup(void)
"LED reset");
}
static void __init archer_c58_v1_setup(void)
{
archer_c5x_v1_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c58_v1_leds_gpio),
archer_c58_v1_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_ARCHER_C58_V1, "ARCHER-C58-V1",
"TP-LINK Archer C58 v1", archer_c58_v1_setup);
static void __init archer_c59_v1_setup(void)
{
archer_c5x_v1_setup();
ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
archer_c59_v1_leds_gpio);
}
MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1",
"TP-LINK Archer C59 v1", archer_c59_v1_setup);

1
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
Unescape Escape View File

@ -42,6 +42,7 @@ enum ath79_mach_type {
ATH79_MACH_AP96, /* Atheros AP96 */
ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */
ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
ATH79_MACH_ARCHER_C58_V1, /* TP-LINK Archer C58 V1 board */
ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */

13
target/linux/ar71xx/image/tp-link.mk
Unescape Escape View File

@ -137,6 +137,17 @@ define Device/archer-c25-v1
MTDPARTS := spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,1536k(kernel),6272k(rootfs),128k(config)ro,64k(art)ro,7808k@0x30000(firmware)
endef
define Device/archer-c58-v1
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK Archer C58 v1
DEVICE_PACKAGES := kmod-ath10k
BOARDNAME := ARCHER-C58-V1
TPLINK_BOARD_NAME := ARCHER-C58-V1
DEVICE_PROFILE := ARCHERC58V1
IMAGE_SIZE := 7936k
MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k@0x20000(firmware)
endef
define Device/archer-c59-v1
$(Device/archer-cxx)
DEVICE_TITLE := TP-LINK Archer C59 v1
@ -158,7 +169,7 @@ define Device/archer-c60-v1
IMAGE_SIZE := 7936k
MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,1344k(kernel),6592k(rootfs),64k(tplink)ro,64k(art)ro,7936k@0x20000(firmware)
endef
TARGET_DEVICES += archer-c25-v1 archer-c59-v1 archer-c60-v1
TARGET_DEVICES += archer-c25-v1 archer-c58-v1 archer-c59-v1 archer-c60-v1
define Device/archer-c5-v1
$(Device/tplink-16mlzma)

1
target/linux/ar71xx/mikrotik/config-default
Unescape Escape View File

@ -17,6 +17,7 @@
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set

1
target/linux/ar71xx/nand/config-default
Unescape Escape View File

@ -17,6 +17,7 @@
# CONFIG_ATH79_MACH_AP90Q is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set

35
tools/firmware-utils/src/tplink-safeloader.c
Unescape Escape View File

@ -341,6 +341,41 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system",
},
/** Firmware layout for the C58v1 */
{
.id = "ARCHER-C58-V1",
.vendor = "",
.support_list =
"SupportList:\r\n"
"{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
"{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
"{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
.support_trail = '\x00',
.soft_ver = "soft_ver:1.0.0\n",
.partitions = {
{"fs-uboot", 0x00000, 0x10000},
{"default-mac", 0x10000, 0x00200},
{"pin", 0x10200, 0x00200},
{"product-info", 0x10400, 0x00100},
{"partition-table", 0x10500, 0x00800},
{"soft-version", 0x11300, 0x00200},
{"support-list", 0x11500, 0x00100},
{"device-id", 0x11600, 0x00100},
{"profile", 0x11700, 0x03900},
{"default-config", 0x15000, 0x04000},
{"user-config", 0x19000, 0x04000},
{"os-image", 0x20000, 0x150000},
{"file-system", 0x170000, 0x678000},
{"certyficate", 0x7e8000, 0x08000},
{"radio", 0x7f0000, 0x10000},
{NULL, 0, 0}
},
.first_sysupgrade_partition = "os-image",
.last_sysupgrade_partition = "file-system",
},
/** Firmware layout for the C59v1 */
{
.id = "ARCHER-C59-V1",

Write Preview
Loading…
Cancel
Save