You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
INAGAKI Hiroshi 3a8d65010d ramips: add support for ELECOM WRC-2533GST2
ELECOM WRC-2533GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based
on MT7621A.

Specification:

- SoC		: MediaTek MT7621A
- RAM		: DDR3 256 MiB
- Flash		: SPI-NOR 32 MiB
- WLAN		: 2.4/5 GHz 4T4R (2x MediaTek MT7615)
- Ethernet	: 10/100/1000 Mbps x5
  - Switch	: MediaTek MT7530 (SoC)
- LED/keys	: 4x/6x (2x buttons, 1x slide-switch)
- UART		: through-hole on PCB
  - J4: 3.3V, GND, TX, RX from ethernet port side
  - 57600n8
- Power		: 12VDC, 1.5A

Flash instruction using factory image:

1. Boot WRC-2533GST2 normally
2. Access to "http://192.168.2.1/" and open firmware update page
   ("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
4 years ago
..
lzma-loader ramips: Add support for mt7621 to lzma-loader 6 years ago
Makefile ramips: add support for netis WF2770 4 years ago
common-tp-link.mk treewide: omit IMAGE_SIZE argument from check-size 4 years ago
mt76x8.mk ramips: add support for Asus RT-N10P V3 / RT-N11P B1 / RT-N12 VP B1 4 years ago
mt7620.mk ramips: add support for Netgear EX6120 4 years ago
mt7621.mk ramips: add support for ELECOM WRC-2533GST2 4 years ago
rt288x.mk ramips: tidy up image subtarget Makefiles 4 years ago
rt305x.mk ramips: add kmod-usb-dwc2 to ZyXEL Keenetic image 4 years ago
rt3883.mk ramips: tidy up image subtarget Makefiles 4 years ago