You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

INAGAKI Hiroshi 3a8d65010d ramips: add support for ELECOM WRC-2533GST2 ... ELECOM WRC-2533GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB - Flash : SPI-NOR 32 MiB - WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - LED/keys : 4x/6x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX from ethernet port side - 57600n8 - Power : 12VDC, 1.5A Flash instruction using factory image: 1. Boot WRC-2533GST2 normally 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		4 years ago
..
imagebuilder	imagebuilder: Remove json_info_files/ before build	4 years ago
linux	ramips: add support for ELECOM WRC-2533GST2	4 years ago
sdk	sdk: add OpenWrt branding to menuconfig & .config	4 years ago
toolchain	toolchain: wrapper.sh: harmonize leading whitespaces	4 years ago
Config.in	build: define RTC_SUPPORT as a bool	4 years ago
Makefile	build: make <subdir>/install opt-in, use it for target/ only	7 years ago