You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
697 lines
30 KiB
Diff
697 lines
30 KiB
Diff
--- a/nl80211.h
|
|
+++ b/nl80211.h
|
|
@@ -11,7 +11,7 @@
|
|
* Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
|
|
* Copyright 2008 Colin McCabe <colin@cozybit.com>
|
|
* Copyright 2015-2017 Intel Deutschland GmbH
|
|
- * Copyright (C) 2018-2019 Intel Corporation
|
|
+ * Copyright (C) 2018-2020 Intel Corporation
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
@@ -249,6 +249,45 @@
|
|
*/
|
|
|
|
/**
|
|
+ * DOC: VLAN offload support for setting group keys and binding STAs to VLANs
|
|
+ *
|
|
+ * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they
|
|
+ * support offloading VLAN functionality in a manner where the driver exposes a
|
|
+ * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs
|
|
+ * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet
|
|
+ * case. Frames received from stations that are not assigned to any VLAN are
|
|
+ * delivered on the main netdev and frames to such stations can be sent through
|
|
+ * that main netdev.
|
|
+ *
|
|
+ * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and
|
|
+ * %NL80211_CMD_SET_STATION will optionally specify vlan_id using
|
|
+ * %NL80211_ATTR_VLAN_ID.
|
|
+ */
|
|
+
|
|
+/**
|
|
+ * DOC: TID configuration
|
|
+ *
|
|
+ * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG
|
|
+ * attribute given in wiphy capabilities.
|
|
+ *
|
|
+ * The necessary configuration parameters are mentioned in
|
|
+ * &enum nl80211_tid_config_attr and it will be passed to the
|
|
+ * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG.
|
|
+ *
|
|
+ * If the configuration needs to be applied for specific peer then the MAC
|
|
+ * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
|
|
+ * configuration will be applied for all the connected peers in the vif except
|
|
+ * any peers that have peer specific configuration for the TID by default; if
|
|
+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
|
|
+ * will be overwritten.
|
|
+ *
|
|
+ * All this configuration is valid only for STA's current connection
|
|
+ * i.e. the configuration will be reset to default when the STA connects back
|
|
+ * after disconnection/roaming, and this configuration will be cleared when
|
|
+ * the interface goes down.
|
|
+ */
|
|
+
|
|
+/**
|
|
* enum nl80211_commands - supported nl80211 commands
|
|
*
|
|
* @NL80211_CMD_UNSPEC: unspecified command to catch errors
|
|
@@ -257,13 +296,14 @@
|
|
* to get a list of all present wiphys.
|
|
* @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or
|
|
* %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME,
|
|
- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the
|
|
- * attributes determining the channel width; this is used for setting
|
|
- * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT,
|
|
- * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
|
|
- * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD.
|
|
- * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL
|
|
- * instead, the support here is for backward compatibility only.
|
|
+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ,
|
|
+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the
|
|
+ * channel width; this is used for setting monitor mode channel),
|
|
+ * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG,
|
|
+ * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or
|
|
+ * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel,
|
|
+ * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward
|
|
+ * compatibility only.
|
|
* @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request
|
|
* or rename notification. Has attributes %NL80211_ATTR_WIPHY and
|
|
* %NL80211_ATTR_WIPHY_NAME.
|
|
@@ -312,7 +352,8 @@
|
|
* %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT,
|
|
* %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
|
|
* The channel to use can be set on the interface or be given using the
|
|
- * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
|
|
+ * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the
|
|
+ * attributes determining channel width.
|
|
* @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
|
|
* @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
|
|
* @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
|
|
@@ -497,11 +538,12 @@
|
|
* interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and
|
|
* BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
|
|
* the SSID (mainly for association, but is included in authentication
|
|
- * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ is used
|
|
- * to specify the frequence of the channel in MHz. %NL80211_ATTR_AUTH_TYPE
|
|
- * is used to specify the authentication type. %NL80211_ATTR_IE is used to
|
|
- * define IEs (VendorSpecificInfo, but also including RSN IE and FT IEs)
|
|
- * to be added to the frame.
|
|
+ * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
|
|
+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
|
|
+ * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
|
|
+ * authentication type. %NL80211_ATTR_IE is used to define IEs
|
|
+ * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
|
|
+ * to the frame.
|
|
* When used as an event, this reports reception of an Authentication
|
|
* frame in station and IBSS modes when the local MLME processed the
|
|
* frame, i.e., it was for the local STA and was received in correct
|
|
@@ -556,8 +598,9 @@
|
|
* requests to connect to a specified network but without separating
|
|
* auth and assoc steps. For this, you need to specify the SSID in a
|
|
* %NL80211_ATTR_SSID attribute, and can optionally specify the association
|
|
- * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP,
|
|
- * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
|
|
+ * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE,
|
|
+ * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ,
|
|
+ * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT,
|
|
* %NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
|
|
* %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
|
|
* %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and
|
|
@@ -571,6 +614,14 @@
|
|
* set of BSSID,frequency parameters is used (i.e., either the enforcing
|
|
* %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict
|
|
* %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT).
|
|
+ * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if
|
|
+ * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is
|
|
+ * included, these IEs through %NL80211_ATTR_IE are specified by the user
|
|
+ * space based on the best possible BSS selected. Thus, if the driver ends
|
|
+ * up selecting a different BSS, it can modify these IEs accordingly (e.g.
|
|
+ * userspace asks the driver to perform PMKSA caching with BSS1 and the
|
|
+ * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE
|
|
+ * has to get updated with the apt PMKID).
|
|
* %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within
|
|
* the ESS in case the device is already associated and an association with
|
|
* a different BSS is desired.
|
|
@@ -640,6 +691,10 @@
|
|
* four bytes for vendor frames including the OUI. The registration
|
|
* cannot be dropped, but is removed automatically when the netlink
|
|
* socket is closed. Multiple registrations can be made.
|
|
+ * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if
|
|
+ * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which
|
|
+ * case the registration can also be modified to include/exclude the
|
|
+ * flag, rather than requiring unregistration to change it.
|
|
* @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for
|
|
* backward compatibility
|
|
* @NL80211_CMD_FRAME: Management frame TX request and RX notification. This
|
|
@@ -739,7 +794,7 @@
|
|
* various triggers. These triggers can be configured through this
|
|
* command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For
|
|
* more background information, see
|
|
- * http://wireless.kernel.org/en/users/Documentation/WoWLAN.
|
|
+ * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN.
|
|
* The @NL80211_CMD_SET_WOWLAN command can also be used as a notification
|
|
* from the driver reporting the wakeup reason. In this case, the
|
|
* @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason
|
|
@@ -1101,6 +1156,20 @@
|
|
* peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
|
|
* content. The frame is ethernet data.
|
|
*
|
|
+ * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration
|
|
+ * is passed using %NL80211_ATTR_TID_CONFIG attribute.
|
|
+ *
|
|
+ * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon
|
|
+ * frame. This event is used to indicate that a received Beacon frame was
|
|
+ * dropped because it did not include a valid MME MIC while beacon
|
|
+ * protection was enabled (BIGTK configured in station mode).
|
|
+ *
|
|
+ * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control
|
|
+ * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME.
|
|
+ * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME
|
|
+ * includes the contents of the frame. %NL80211_ATTR_ACK flag is included
|
|
+ * if the recipient acknowledged the frame.
|
|
+ *
|
|
* @NL80211_CMD_MAX: highest used command number
|
|
* @__NL80211_CMD_AFTER_LAST: internal use
|
|
*/
|
|
@@ -1325,6 +1394,12 @@ enum nl80211_commands {
|
|
|
|
NL80211_CMD_PROBE_MESH_LINK,
|
|
|
|
+ NL80211_CMD_SET_TID_CONFIG,
|
|
+
|
|
+ NL80211_CMD_UNPROT_BEACON,
|
|
+
|
|
+ NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS,
|
|
+
|
|
/* add new commands above here */
|
|
|
|
/* used to define NL80211_CMD_MAX below */
|
|
@@ -1370,7 +1445,8 @@ enum nl80211_commands {
|
|
* of &enum nl80211_chan_width, describing the channel width. See the
|
|
* documentation of the enum for more information.
|
|
* @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the
|
|
- * channel, used for anything but 20 MHz bandwidth
|
|
+ * channel, used for anything but 20 MHz bandwidth. In S1G this is the
|
|
+ * operating channel center frequency.
|
|
* @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the
|
|
* channel, used only for 80+80 MHz bandwidth
|
|
* @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ
|
|
@@ -1580,7 +1656,8 @@ enum nl80211_commands {
|
|
* flag is included, then control port frames are sent over NL80211 instead
|
|
* using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is
|
|
* to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
|
|
- * flag.
|
|
+ * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
|
|
+ * frames are not forwared over the control port.
|
|
*
|
|
* @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
|
|
* We recommend using nested, driver-specific attributes within this.
|
|
@@ -2373,6 +2450,64 @@ enum nl80211_commands {
|
|
* the allowed channel bandwidth configurations. (u8 attribute)
|
|
* Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
|
|
*
|
|
+ * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key
|
|
+ * (u16).
|
|
+ *
|
|
+ * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings.
|
|
+ *
|
|
+ * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry
|
|
+ * using attributes from &enum nl80211_iftype_akm_attributes. This
|
|
+ * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating
|
|
+ * supported AKM suites capability per interface. AKMs advertised in
|
|
+ * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not
|
|
+ * advertised for a specific interface type.
|
|
+ *
|
|
+ * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a
|
|
+ * nested attribute with &enum nl80211_tid_config_attr sub-attributes;
|
|
+ * on output (in wiphy attributes) it contains only the feature sub-
|
|
+ * attributes.
|
|
+ *
|
|
+ * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control
|
|
+ * port in order to forward/receive them as ordinary data frames.
|
|
+ *
|
|
+ * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32,
|
|
+ * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value).
|
|
+ * An optional parameter configured through %NL80211_CMD_SET_PMKSA.
|
|
+ * Drivers that trigger roaming need to know the lifetime of the
|
|
+ * configured PMKSA for triggering the full vs. PMKSA caching based
|
|
+ * authentication. This timeout helps authentication methods like SAE,
|
|
+ * where PMK gets updated only by going through a full (new SAE)
|
|
+ * authentication instead of getting updated during an association for EAP
|
|
+ * authentication. No new full authentication within the PMK expiry shall
|
|
+ * result in a disassociation at the end of the lifetime.
|
|
+ *
|
|
+ * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in
|
|
+ * terms of percentage of %NL80211_ATTR_PMK_LIFETIME
|
|
+ * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional
|
|
+ * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the
|
|
+ * driver to trigger a full authentication roam (without PMKSA caching)
|
|
+ * after the reauthentication threshold time, but before the PMK lifetime
|
|
+ * has expired.
|
|
+ *
|
|
+ * Authentication methods like SAE need to be able to generate a new PMKSA
|
|
+ * entry without having to force a disconnection after the PMK timeout. If
|
|
+ * no roaming occurs between the reauth threshold and PMK expiration,
|
|
+ * disassociation is still forced.
|
|
+ * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the
|
|
+ * %NL80211_CMD_REGISTER_FRAME command, see the description there.
|
|
+ * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated
|
|
+ * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with
|
|
+ * an %NL80211_ATTR_WIPHY_FREQ_OFFSET.
|
|
+ * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the
|
|
+ * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1.
|
|
+ * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies
|
|
+ *
|
|
+ * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
|
|
+ * association request when used with NL80211_CMD_NEW_STATION).
|
|
+ *
|
|
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
|
|
+ * transmit power to stay within regulatory limits. u32, dBi.
|
|
+ *
|
|
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
|
|
* @NL80211_ATTR_MAX: highest attribute number currently defined
|
|
* @__NL80211_ATTR_AFTER_LAST: internal use
|
|
@@ -2835,6 +2970,28 @@ enum nl80211_attrs {
|
|
NL80211_ATTR_WIPHY_EDMG_CHANNELS,
|
|
NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
|
|
|
|
+ NL80211_ATTR_VLAN_ID,
|
|
+
|
|
+ NL80211_ATTR_HE_BSS_COLOR,
|
|
+
|
|
+ NL80211_ATTR_IFTYPE_AKM_SUITES,
|
|
+
|
|
+ NL80211_ATTR_TID_CONFIG,
|
|
+
|
|
+ NL80211_ATTR_CONTROL_PORT_NO_PREAUTH,
|
|
+
|
|
+ NL80211_ATTR_PMK_LIFETIME,
|
|
+ NL80211_ATTR_PMK_REAUTH_THRESHOLD,
|
|
+
|
|
+ NL80211_ATTR_RECEIVE_MULTICAST,
|
|
+ NL80211_ATTR_WIPHY_FREQ_OFFSET,
|
|
+ NL80211_ATTR_CENTER_FREQ1_OFFSET,
|
|
+ NL80211_ATTR_SCAN_FREQ_KHZ,
|
|
+
|
|
+ NL80211_ATTR_HE_6GHZ_CAPABILITY,
|
|
+
|
|
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
|
|
+
|
|
/* add attributes here, update the policy in nl80211.c */
|
|
|
|
__NL80211_ATTR_AFTER_LAST,
|
|
@@ -3413,6 +3570,8 @@ enum nl80211_mpath_info {
|
|
* defined in HE capabilities IE
|
|
* @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
|
|
* defined
|
|
+ * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16),
|
|
+ * given for all 6 GHz band channels
|
|
* @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
|
|
*/
|
|
enum nl80211_band_iftype_attr {
|
|
@@ -3423,6 +3582,7 @@ enum nl80211_band_iftype_attr {
|
|
NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
|
|
NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
|
|
NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
|
|
+ NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
|
|
|
|
/* keep last */
|
|
__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
|
|
@@ -3554,6 +3714,9 @@ enum nl80211_wmm_rule {
|
|
* @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations.
|
|
* This is a nested attribute that contains the wmm limitation per AC.
|
|
* (see &enum nl80211_wmm_rule)
|
|
+ * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
|
|
+ * in current regulatory domain.
|
|
+ * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
|
|
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
|
|
* currently defined
|
|
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
|
|
@@ -3583,6 +3746,8 @@ enum nl80211_frequency_attr {
|
|
NL80211_FREQUENCY_ATTR_NO_20MHZ,
|
|
NL80211_FREQUENCY_ATTR_NO_10MHZ,
|
|
NL80211_FREQUENCY_ATTR_WMM,
|
|
+ NL80211_FREQUENCY_ATTR_NO_HE,
|
|
+ NL80211_FREQUENCY_ATTR_OFFSET,
|
|
|
|
/* keep last */
|
|
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
|
|
@@ -3780,6 +3945,7 @@ enum nl80211_sched_scan_match_attr {
|
|
* @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
|
|
* @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
|
|
* @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
|
|
+ * @NL80211_RRF_NO_HE: HE operation not allowed
|
|
*/
|
|
enum nl80211_reg_rule_flags {
|
|
NL80211_RRF_NO_OFDM = 1<<0,
|
|
@@ -3797,6 +3963,7 @@ enum nl80211_reg_rule_flags {
|
|
NL80211_RRF_NO_HT40PLUS = 1<<14,
|
|
NL80211_RRF_NO_80MHZ = 1<<15,
|
|
NL80211_RRF_NO_160MHZ = 1<<16,
|
|
+ NL80211_RRF_NO_HE = 1<<17,
|
|
};
|
|
|
|
#define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
|
|
@@ -4351,6 +4518,7 @@ enum nl80211_bss_scan_width {
|
|
* @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update.
|
|
* Contains a nested array of signal strength attributes (u8, dBm),
|
|
* using the nesting index as the antenna number.
|
|
+ * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
|
|
* @__NL80211_BSS_AFTER_LAST: internal
|
|
* @NL80211_BSS_MAX: highest BSS attribute
|
|
*/
|
|
@@ -4375,6 +4543,7 @@ enum nl80211_bss {
|
|
NL80211_BSS_PARENT_TSF,
|
|
NL80211_BSS_PARENT_BSSID,
|
|
NL80211_BSS_CHAIN_SIGNAL,
|
|
+ NL80211_BSS_FREQUENCY_OFFSET,
|
|
|
|
/* keep last */
|
|
__NL80211_BSS_AFTER_LAST,
|
|
@@ -4503,6 +4672,7 @@ enum nl80211_key_default_types {
|
|
* See &enum nl80211_key_default_types.
|
|
* @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.
|
|
* Defaults to @NL80211_KEY_RX_TX.
|
|
+ * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key
|
|
*
|
|
* @__NL80211_KEY_AFTER_LAST: internal
|
|
* @NL80211_KEY_MAX: highest key attribute
|
|
@@ -4518,6 +4688,7 @@ enum nl80211_key_attributes {
|
|
NL80211_KEY_TYPE,
|
|
NL80211_KEY_DEFAULT_TYPES,
|
|
NL80211_KEY_MODE,
|
|
+ NL80211_KEY_DEFAULT_BEACON,
|
|
|
|
/* keep last */
|
|
__NL80211_KEY_AFTER_LAST,
|
|
@@ -4674,6 +4845,92 @@ enum nl80211_tx_power_setting {
|
|
};
|
|
|
|
/**
|
|
+ * enum nl80211_tid_config - TID config state
|
|
+ * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID
|
|
+ * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID
|
|
+ */
|
|
+enum nl80211_tid_config {
|
|
+ NL80211_TID_CONFIG_ENABLE,
|
|
+ NL80211_TID_CONFIG_DISABLE,
|
|
+};
|
|
+
|
|
+/* enum nl80211_tx_rate_setting - TX rate configuration type
|
|
+ * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate
|
|
+ * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter
|
|
+ * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter
|
|
+ */
|
|
+enum nl80211_tx_rate_setting {
|
|
+ NL80211_TX_RATE_AUTOMATIC,
|
|
+ NL80211_TX_RATE_LIMITED,
|
|
+ NL80211_TX_RATE_FIXED,
|
|
+};
|
|
+
|
|
+/* enum nl80211_tid_config_attr - TID specific configuration.
|
|
+ * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values
|
|
+ * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported
|
|
+ * for per-vif configuration; doesn't list the ones that are generic
|
|
+ * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
|
|
+ * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
|
|
+ * per peer instead.
|
|
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
|
|
+ * that the new configuration overrides all previous peer
|
|
+ * configurations, otherwise previous peer specific configurations
|
|
+ * should be left untouched.
|
|
+ * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7)
|
|
+ * Its type is u16.
|
|
+ * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID.
|
|
+ * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config.
|
|
+ * Its type is u8.
|
|
+ * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame
|
|
+ * transmission, user-space sets this configuration in
|
|
+ * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and
|
|
+ * the max value is advertised by the driver in this attribute on
|
|
+ * output in wiphy capabilities.
|
|
+ * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame
|
|
+ * transmission, user-space sets this configuration in
|
|
+ * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and
|
|
+ * the max value is advertised by the driver in this attribute on
|
|
+ * output in wiphy capabilities.
|
|
+ * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation
|
|
+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
|
|
+ * Its type is u8, using the values from &nl80211_tid_config.
|
|
+ * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs
|
|
+ * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using
|
|
+ * the values from &nl80211_tid_config.
|
|
+ * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation
|
|
+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS.
|
|
+ * Its type is u8, using the values from &nl80211_tid_config.
|
|
+ * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful
|
|
+ * to notfiy the driver that what type of txrate should be used
|
|
+ * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using
|
|
+ * the values form &nl80211_tx_rate_setting.
|
|
+ * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied
|
|
+ * with the parameters passed through %NL80211_ATTR_TX_RATES.
|
|
+ * configuration is applied to the data frame for the tid to that connected
|
|
+ * station.
|
|
+ */
|
|
+enum nl80211_tid_config_attr {
|
|
+ __NL80211_TID_CONFIG_ATTR_INVALID,
|
|
+ NL80211_TID_CONFIG_ATTR_PAD,
|
|
+ NL80211_TID_CONFIG_ATTR_VIF_SUPP,
|
|
+ NL80211_TID_CONFIG_ATTR_PEER_SUPP,
|
|
+ NL80211_TID_CONFIG_ATTR_OVERRIDE,
|
|
+ NL80211_TID_CONFIG_ATTR_TIDS,
|
|
+ NL80211_TID_CONFIG_ATTR_NOACK,
|
|
+ NL80211_TID_CONFIG_ATTR_RETRY_SHORT,
|
|
+ NL80211_TID_CONFIG_ATTR_RETRY_LONG,
|
|
+ NL80211_TID_CONFIG_ATTR_AMPDU_CTRL,
|
|
+ NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL,
|
|
+ NL80211_TID_CONFIG_ATTR_AMSDU_CTRL,
|
|
+ NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE,
|
|
+ NL80211_TID_CONFIG_ATTR_TX_RATE,
|
|
+
|
|
+ /* keep last */
|
|
+ __NL80211_TID_CONFIG_ATTR_AFTER_LAST,
|
|
+ NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1
|
|
+};
|
|
+
|
|
+/**
|
|
* enum nl80211_packet_pattern_attr - packet pattern attribute
|
|
* @__NL80211_PKTPAT_INVALID: invalid number for nested attribute
|
|
* @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has
|
|
@@ -5144,6 +5401,8 @@ enum plink_actions {
|
|
|
|
#define NL80211_KCK_LEN 16
|
|
#define NL80211_KEK_LEN 16
|
|
+#define NL80211_KCK_EXT_LEN 24
|
|
+#define NL80211_KEK_EXT_LEN 32
|
|
#define NL80211_REPLAY_CTR_LEN 8
|
|
|
|
/**
|
|
@@ -5152,6 +5411,7 @@ enum plink_actions {
|
|
* @NL80211_REKEY_DATA_KEK: key encryption key (binary)
|
|
* @NL80211_REKEY_DATA_KCK: key confirmation key (binary)
|
|
* @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary)
|
|
+ * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type)
|
|
* @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal)
|
|
* @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal)
|
|
*/
|
|
@@ -5160,6 +5420,7 @@ enum nl80211_rekey_data {
|
|
NL80211_REKEY_DATA_KEK,
|
|
NL80211_REKEY_DATA_KCK,
|
|
NL80211_REKEY_DATA_REPLAY_CTR,
|
|
+ NL80211_REKEY_DATA_AKM,
|
|
|
|
/* keep last */
|
|
NUM_NL80211_REKEY_DATA,
|
|
@@ -5484,6 +5745,39 @@ enum nl80211_feature_flags {
|
|
* @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in
|
|
* station mode (SAE password is passed as part of the connect command).
|
|
*
|
|
+ * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev
|
|
+ * with VLAN tagged frames and separate VLAN-specific netdevs added using
|
|
+ * vconfig similarly to the Ethernet case.
|
|
+ *
|
|
+ * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL)
|
|
+ * feature, which prevents bufferbloat by using the expected transmission
|
|
+ * time to limit the amount of data buffered in the hardware.
|
|
+ *
|
|
+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection
|
|
+ * and can receive key configuration for BIGTK using key indexes 6 and 7.
|
|
+ * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon
|
|
+ * protection as a client only and cannot transmit protected beacons.
|
|
+ *
|
|
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the
|
|
+ * forwarding of preauth frames over the control port. They are then
|
|
+ * handled as ordinary data frames.
|
|
+ *
|
|
+ * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames
|
|
+ *
|
|
+ * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations
|
|
+ * in IBSS mode, essentially by dropping their state.
|
|
+ *
|
|
+ * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations
|
|
+ * are possible for multicast frames and those will be reported properly.
|
|
+ *
|
|
+ * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and
|
|
+ * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to
|
|
+ * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be
|
|
+ * included in the scan request.
|
|
+ *
|
|
+ * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver
|
|
+ * can report tx status for control port over nl80211 tx operations.
|
|
+ *
|
|
* @NUM_NL80211_EXT_FEATURES: number of extended features.
|
|
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
|
|
*/
|
|
@@ -5529,6 +5823,16 @@ enum nl80211_ext_feature_index {
|
|
NL80211_EXT_FEATURE_EXT_KEY_ID,
|
|
NL80211_EXT_FEATURE_STA_TX_PWR,
|
|
NL80211_EXT_FEATURE_SAE_OFFLOAD,
|
|
+ NL80211_EXT_FEATURE_VLAN_OFFLOAD,
|
|
+ NL80211_EXT_FEATURE_AQL,
|
|
+ NL80211_EXT_FEATURE_BEACON_PROTECTION,
|
|
+ NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH,
|
|
+ NL80211_EXT_FEATURE_PROTECTED_TWT,
|
|
+ NL80211_EXT_FEATURE_DEL_IBSS_STA,
|
|
+ NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS,
|
|
+ NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT,
|
|
+ NL80211_EXT_FEATURE_SCAN_FREQ_KHZ,
|
|
+ NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,
|
|
|
|
/* add new features before the definition below */
|
|
NUM_NL80211_EXT_FEATURES,
|
|
@@ -5640,6 +5944,9 @@ enum nl80211_timeout_reason {
|
|
* @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
|
|
* only have supported rates and no additional capabilities (unless
|
|
* added by userspace explicitly.)
|
|
+ * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
|
|
+ * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means
|
|
+ * %NL80211_ATTR_SCAN_FREQUENCIES will not be included.
|
|
*/
|
|
enum nl80211_scan_flags {
|
|
NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
|
|
@@ -5655,6 +5962,7 @@ enum nl80211_scan_flags {
|
|
NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10,
|
|
NL80211_SCAN_FLAG_RANDOM_SN = 1<<11,
|
|
NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12,
|
|
+ NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13,
|
|
};
|
|
|
|
/**
|
|
@@ -6151,12 +6459,14 @@ enum nl80211_ftm_responder_stats {
|
|
* @NL80211_PREAMBLE_HT: HT preamble
|
|
* @NL80211_PREAMBLE_VHT: VHT preamble
|
|
* @NL80211_PREAMBLE_DMG: DMG preamble
|
|
+ * @NL80211_PREAMBLE_HE: HE preamble
|
|
*/
|
|
enum nl80211_preamble {
|
|
NL80211_PREAMBLE_LEGACY,
|
|
NL80211_PREAMBLE_HT,
|
|
NL80211_PREAMBLE_VHT,
|
|
NL80211_PREAMBLE_DMG,
|
|
+ NL80211_PREAMBLE_HE,
|
|
};
|
|
|
|
/**
|
|
@@ -6349,6 +6659,10 @@ enum nl80211_peer_measurement_attrs {
|
|
* is valid)
|
|
* @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating
|
|
* the maximum FTMs per burst (if not present anything is valid)
|
|
+ * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
|
|
+ * trigger based ranging measurement is supported
|
|
+ * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
|
|
+ * if non trigger based ranging measurement is supported
|
|
*
|
|
* @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
|
|
* @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
|
|
@@ -6364,6 +6678,8 @@ enum nl80211_peer_measurement_ftm_capa {
|
|
NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS,
|
|
NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT,
|
|
NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST,
|
|
+ NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED,
|
|
+ NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED,
|
|
|
|
/* keep last */
|
|
NUM_NL80211_PMSR_FTM_CAPA_ATTR,
|
|
@@ -6393,6 +6709,20 @@ enum nl80211_peer_measurement_ftm_capa {
|
|
* @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag)
|
|
* @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data
|
|
* (flag)
|
|
+ * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging
|
|
+ * measurement (flag).
|
|
+ * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are
|
|
+ * mutually exclusive.
|
|
+ * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
|
|
+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
|
|
+ * ranging will be used.
|
|
+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
|
|
+ * ranging measurement (flag)
|
|
+ * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
|
|
+ * mutually exclusive.
|
|
+ * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
|
|
+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
|
|
+ * ranging will be used.
|
|
*
|
|
* @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal
|
|
* @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number
|
|
@@ -6409,6 +6739,8 @@ enum nl80211_peer_measurement_ftm_req {
|
|
NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES,
|
|
NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI,
|
|
NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC,
|
|
+ NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED,
|
|
+ NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED,
|
|
|
|
/* keep last */
|
|
NUM_NL80211_PMSR_FTM_REQ_ATTR,
|
|
@@ -6548,5 +6880,51 @@ enum nl80211_obss_pd_attributes {
|
|
NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1,
|
|
};
|
|
|
|
+/**
|
|
+ * enum nl80211_bss_color_attributes - BSS Color attributes
|
|
+ * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid
|
|
+ *
|
|
+ * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color.
|
|
+ * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled.
|
|
+ * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used..
|
|
+ *
|
|
+ * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal
|
|
+ * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute.
|
|
+ */
|
|
+enum nl80211_bss_color_attributes {
|
|
+ __NL80211_HE_BSS_COLOR_ATTR_INVALID,
|
|
+
|
|
+ NL80211_HE_BSS_COLOR_ATTR_COLOR,
|
|
+ NL80211_HE_BSS_COLOR_ATTR_DISABLED,
|
|
+ NL80211_HE_BSS_COLOR_ATTR_PARTIAL,
|
|
+
|
|
+ /* keep last */
|
|
+ __NL80211_HE_BSS_COLOR_ATTR_LAST,
|
|
+ NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1,
|
|
+};
|
|
+
|
|
+/**
|
|
+ * enum nl80211_iftype_akm_attributes - interface type AKM attributes
|
|
+ * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid
|
|
+ *
|
|
+ * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag
|
|
+ * attribute for each interface type that supports AKM suites specified in
|
|
+ * %NL80211_IFTYPE_AKM_ATTR_SUITES
|
|
+ * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported
|
|
+ * AKM suites for the specified interface types.
|
|
+ *
|
|
+ * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal
|
|
+ * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute.
|
|
+ */
|
|
+enum nl80211_iftype_akm_attributes {
|
|
+ __NL80211_IFTYPE_AKM_ATTR_INVALID,
|
|
+
|
|
+ NL80211_IFTYPE_AKM_ATTR_IFTYPES,
|
|
+ NL80211_IFTYPE_AKM_ATTR_SUITES,
|
|
+
|
|
+ /* keep last */
|
|
+ __NL80211_IFTYPE_AKM_ATTR_LAST,
|
|
+ NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1,
|
|
+};
|
|
|
|
#endif /* __LINUX_NL80211_H */
|