f2719168ba
libubox: update to latest version, improves uloop error handling
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39725
10 years ago
a42b421c79
procd: depend on libubox directly to rebuild on ABI changes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39724
10 years ago
a15524582c
netifd: depend on libubox directly to rebuild on ABI changes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39723
10 years ago
01c4775116
ubus: declare main version as ABI version for libubus
...
Reorder BuildPackage calls, as libubox needs to come first for ABI
version handling to work
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39722
10 years ago
538e38f5d3
libubox: declare main version as ABI version
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39721
10 years ago
623825103e
build: allow packages to declare ABI versions to detect necessary package rebuilds
...
If a package directly depends on another package that recently changed
its ABI version, it will be cleaned up and rebuilt (assuming quilt is
not used).
This helps with packages that have no stable ABI, e.g. libubox, ubus,
etc.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39720
10 years ago
f587bacc26
brcm47xx: b44: start the phy
...
We did not start the PHY when an external phy was in use. Without this
patch the driver uses half duplex mode and the switch uses full duplex
mode, which causes problems.
Thank you fback for spotting this problem.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39719
10 years ago
15a7efa119
brcm47xx: fix detection of some Linksys WRT54G* devices
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39718
10 years ago
455ee13faf
x86/thincan: remove old kernel config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39717
10 years ago
d5ab9b12bf
x86/thincan: switch to 3.10 and add broken flag
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39716
10 years ago
b8061d4e8e
x86/thincan: add config for 3.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39715
10 years ago
4ae644c137
x86/xen_domu: remove old kernel config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39714
10 years ago
24ef414bec
x86/xen_domu: switch to 3.10 and add broken flag
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39713
10 years ago
f333739c24
x86/xen_domu: add config for 3.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39712
10 years ago
c0405b152f
x86/geos: remove old kernel configs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39711
10 years ago
a7db713477
x86/geos: switch to 3.10 and add broken flag
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39710
10 years ago
944edb47f9
x86/geos: add config for 3.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39709
10 years ago
b5fdd769f0
brcm63xx: update LINUX_VERSION to 3.10.32
...
Missed from the previous comit.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39708
10 years ago
f677b1bc7e
kernel: update 3.10 to 3.10.32
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39707
10 years ago
6c8300df3d
netifd: update to latest version, fixes wireless device reload handling
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39706
10 years ago
590bafe3de
ar71xx: define status LED for the RB91x boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39705
10 years ago
da2f3c1448
ar71xx: rb91x: register GPIO LEDs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39704
10 years ago
14d95026b2
ar71xx: rb91x: add SPI device for the serial shift register
...
The RB91x boards are using a serial shift register
connected to the SPI bus to drive some of the LEDs.
Rework the board setup code to register a SPI device
for that. This makes it possible to use the 'spi-74x164'
driver to control the device.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39703
10 years ago
7b89005f0d
ar71xx/mikrotik: enable the 74x164 GPIO driver
...
That will be used to drive the 74HC595 serial-in/parallel-out
8-bits shift register which can be found on some RouterBOARDs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39702
10 years ago
5f224ef8a3
ar71xx: improve platform device support in the gpio-74x164 driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39701
10 years ago
3d906ac6ac
ar71xx: rb91x-nand: rewrite to use GPIO API
...
Rewrite tha rb91x-nand driver to use GPIO API to
modify the NAND control lines.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39700
10 years ago
8fea668cb7
ar71xx: rb91x: register a gpio-latch platform device
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39699
10 years ago
da5caba072
ar71xx/mikrotik: enable the GPIO latch driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39698
10 years ago
ab08c40487
ar71xx: add a generic GPIO latch driver
...
It will be used for the Mikrotik boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39697
10 years ago
be18a3849b
ar71xx/mikrotik: enable small sector erase in the m25p80 driver
...
The serial flash devices used on the ROuterBOARDs are
supporting 4KiB erase blocks. Enable the small sector
erase option in the m25p80 driver to avoid superfluous
erase/write of adjacent blocks.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39696
10 years ago
b7539ab109
ar71xx: spi-ath79: fix initial GPIO CS line setup
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39695
10 years ago
3e6c7ed4f2
ar71xx: refresh unaligned access hacks patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39694
10 years ago
86f5a9cf78
target/sunxi: add dependency on sunxi to kmod-wdt-sunxi
...
SVN-Revision: 39693
10 years ago
7a8f13f33c
gianfar: Fix reported number of sent bytes to BQL
...
This is a backported patch for the gianfar ethernet driver
used in TPLink 4900 v1. It is supposed to fix the error which
show up in dmesg with:
NETDEV WATCHDOG: eth0 (fsl-gianfar): transmit queue xy timed out
Full upstream patch is at: http://patchwork.ozlabs.org/patch/271242
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
SVN-Revision: 39692
10 years ago
8167b27bca
ath5k: mark the current survey channel as being used
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39691
10 years ago
08255e0237
ath9k: reduce unnecessary logspam ( #14940 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39690
10 years ago
3ae79cd848
ath9k: fix issues with 5/10 mhz channel bandwidth ( #14916 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39689
10 years ago
ec4ab71c54
ath9k: fix issues that have been plaguing some powersave clients since the tx queueing rework ( #14092 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39688
10 years ago
b75914d2fb
ath9k: show more reset causes in debugfs
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39687
10 years ago
ca82dfe31b
mac80211: merge some upstream fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39686
10 years ago
fc0a51c2e1
ath9k: enable u-apsd support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39685
10 years ago
b44e9bff9d
ath9k: add a tx locking fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39684
10 years ago
c1f397e1e1
b53: Make b53_switch_init static
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4869/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39683
10 years ago
9eb60826f2
b53: Add BCM53128 switch support
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Patchwork: http://patchwork.openwrt.org/patch/4867/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39682
10 years ago
b8ed6534ca
brcm63xx: fix RG100A/DB120 usb port number
...
Set usbh ports to 2 to fix #15007 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39681
10 years ago
4a2f87bce0
brcm63xx: fix number of usb ports for HW556 variants
...
Don't only fix up the fallback board, but also all three variants.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39680
10 years ago
ece12908a8
brcm63xx: add initial support for BCM963268BU_P300 reference board
...
Only netboot tested, so no images or now.
GbE ports are only working in FE mode, and leds do not work.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39679
10 years ago
f6c4b1eb29
brcm63xx: add VW6339GU support
...
Completely untested except for booting from network; wan port
only works in 10/HD, lan1 only in 100/FD.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39678
10 years ago
60edb75e47
brcm63xx: fix number of switch ports for BCM63168/63268
...
BCM63168 has 6 ports (3 FE PHY, 1 GE PHY, two RGMII) and BCM63268
has two additional RGMII ports, making it 8.
Fix this by checking the chip variant and applying an appropriate
limit.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39677
10 years ago
edbfb81b56
brcm63xx: F@ST2504n board support (image, base-files)
...
Signed-off-by: Max Staudt <openwrt.max@enpas.org>
Patchwork: http://patchwork.openwrt.org/patch/4730/
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39676
10 years ago
Felix Fietkau
Hauke Mehrtens
Gabor Juhos
Nicolas Thill
Jonas Gorski