Commit Graph

46782 Commits (c81b2e94c7d89fbf9f03aa4680ebb3d26cede872)
 

Author SHA1 Message Date
Roger Pueyo Centelles c81b2e94c7 rbextract: support devices with plain RLE caldata
Old MikroTik devices have the RLE-encoded radio calibration data
directly stored in the art (hard_config) partition, without LZO
compression nor any preceding ERD magic bytes. This commit adds
a fallback for these devices.

Tested on the ath79 target with a MikroTik SXT 5nD r2 (SXT Lite5),
only locally --not yet merged upstream--.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
4 years ago
Kevin Darbyshire-Bryant 3660a89cb9 kernel: x86_64: drop CALGARY properly
Use correct config syntax of 'is not set' instead of just commenting the
line

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years ago
John Crispin 083eb80bf2 mediatek: add latest fixes provided by MTK
Signed-off-by: John Crispin <john@phrozen.org>
4 years ago
Kevin Darbyshire-Bryant ffd249366f kernel: x86_64: drop CALGARY IOMMU
The calgary IOMMU was only used on high-end IBM systems in the early
x86_64 age.  This is an unlikely OpenWrt target and in fact upstream
are looking to drop the driver entirely with the bonus that we no
longer see:

[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years ago
John Crispin a1dd773272 mac80211: enhance wifi reload
If the reconf call fails force a full restart of the radio.

Signed-off-by: John Crispin <john@phrozen.org>
4 years ago
John Crispin d3b7838ebe hostapd: enhance wifi reload
Add a radio_config_id property. If the radio config changes return an error
upon receiving the reconf call.

Signed-off-by: John Crispin <john@phrozen.org>
4 years ago
Felix Fietkau e8fae62f64 mt76: update to the latest version
0a53dcda5203 mt76: mt7603: add upper limit for dynamic sensitivity minimum receive power
46e63c05f7d1 mt76: mt7603: enable dynamic sensitivity adjustment by default
81476f11b68c mt76: mt7615: fix antenna mask initialization in DBDC mode

Signed-off-by: Felix Fietkau <nbd@nbd.name>
4 years ago
Piotr Dymacz a422b171ac base-files: diag: restore default trigger for 'boot' LED
For devices without a dedicated 'diag' LED, we use sometimes one of
other LEDs for indicating at least 'boot', 'failsafe' and 'upgrade'
stages. In some cases, at the same time these LEDs have defined default
triggers in DTS using 'linux,default-trigger' property. Current 'diag'
setup removes the trigger and turns off 'boot' LED after bootup.

One of the examples of such device is TP-Link TL-WR841N v14 (ramips)
which uses 'wlan' LED with defined 'linux,default-trigger' for 'diag':

aliases {
        led-boot = &led_wlan;
        led-failsafe = &led_wlan;
        led-upgrade = &led_wlan;
};

[...]

led_wlan: wlan {
        label = "tl-wr841n-v14:green:wlan";
        gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
        linux,default-trigger = "phy0tpt";
};

This patch extends 'diag.sh' and 'leds.sh' scripts to make sure default
trigger defined in DTS is restored for 'diag' LED which isn't used for
indicating 'running' stage.

Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
4 years ago
Piotr Dymacz 2d113f89d2 hostapd: start hostapd/wpa_supplicant for all wiphy devices
c888e17e06 ("hostapd: manage instances via procd instead of pidfile")
added procd support for managing hostapd and wpa_supplicant daemons
but at the same time limited wiphy names to 'phy*'.

This brings back initial behaviour (introduced in 60fb4c92b6 ("hostapd:
add ubus reload") and makes procd manage daemons for any wiphy device
found in '/sys/class/ieee80211'.

CC: Felix Fietkau <nbd@nbd.name>
CC: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
4 years ago
Piotr Dymacz 82679ca0b9 umbim: move package to 'WWAN' submenu
'uqmi' was moved to 'WWAN' submenu in 9abdeee0b7.
Let's be consistent and do the same with 'umbim'.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
4 years ago
Josef Schlehofer 8fe9daf775 mbedtls: use correct SPDX License Identifier and add License file
License "GPL-2.0+" is deprecated License Identifier according to
SPDX License list [1]. The correct one is GPL-2.0-or-later.
While at it, also add the License file.

[1] https://spdx.org/licenses/

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
4 years ago
Josef Schlehofer 36af1967f5 mbedtls: update to version 2.16.5
Changelog:
https://tls.mbed.org/tech-updates/releases/mbedtls-2.16.5-and-2.7.14-released

Security advisory:
https://tls.mbed.org/tech-updates/security-advisories/mbedtls-security-advisory-2020-02

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
4 years ago
Josef Schlehofer b55f68d553 strace: update to version 5.5
Changelog:
https://strace.io/files/5.5/

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
4 years ago
Hauke Mehrtens 27358ec8fd kernel: Sort generic configuration
This was done by executing these commands:

$ ./scripts/kconfig.pl '+' target/linux/generic/config-4.19 /dev/null > target/linux/generic/config-4.19-new
$ mv target/linux/generic/config-4.14-new target/linux/generic/config-4.14

$ ./scripts/kconfig.pl '+' target/linux/generic/config-4.14 /dev/null > target/linux/generic/config-4.14-new
$ mv target/linux/generic/config-4.19-new target/linux/generic/config-4.19

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years ago
Hauke Mehrtens 806354ab53 linux-atm: Fix compile warning
The function trace_on_exit() is given to atexit() as a parameter, but
atexit() only takes a function pointer to a function with a void
parameter.

This problem was introduced when the on_exit() function was incompletely
replaced by atexit().

Fixes: ba6c8bd614 ("linux-atm: add portability fixes")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years ago
Hauke Mehrtens 930fc09803 ath10k-ct: Use ath10k-ct version 5.4
This makes ath10k-ct use the version based on kernel 5.4 by default.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years ago
Hauke Mehrtens d97b6204a2 ath10k-ct: Update to version 2020-02-18
This adds AP VLAN support.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years ago
Hauke Mehrtens a9363914a3 mac80211: Allow IBSS mode and different beacon intervals
ath10k-ct supports the combination to select IBSS (ADHOC) mode and
different beacon intervals together. mac80211 does not like this
combination, but Ben says this is ok, so remove this check.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years ago
Hauke Mehrtens f2fc7a62c0 rtl8812au-ct: Update to version 2020-01-12
This fixes compile problems with kernel 5.4

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years ago
Roger Pueyo Centelles 6613a7f5cc ath79: add missing reset-gpios for NanoStation Loco M (XW)
When porting support from ar71xx to ath79, the reset-gpios option was
missed. Due to a hardware bug, this would eventually leave the devices
with RX-deaf Ethernet PHY.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
4 years ago
Koen Vandeputte 7ae2523323 kernel: bump 4.19 to 4.19.106
Refreshed all patches.

Remove upstreamed:
- 950-0786-leds-pca963x-Fix-open-drain-initialization.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years ago
Sungbo Eo fc65fae304 kirkwood: remove kmod-i2c-mv64xxx from DEVICE_PACKAGES
Commit 9a1f441ac8 ("kirkwood: enable SoC drivers in the kernel config")
enabled I2C_MV64XXX in the kernel config, and the subsequent commit 0d5ba94088
("orion: enable SoC drivers in the kernel config") removed kmod-i2c-mv64xxx
package entirely. As the feature is now kernel built-in and the package does not
exist anymore, we can safely remove kmod-i2c-mv64xxx from DEVICE_PACKAGES.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years ago
Koen Vandeputte b6c9d2bab0 kernel: bump 4.19 to 4.19.105
Refreshed all patches.

Fixes:
- CVE-2013-1798
- CVE-2019-3016

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years ago
Koen Vandeputte f4bea1b6a3 kernel: bump 4.14 to 4.14.171
Refreshed all patches.

Fixes:
- CVE-2013-1798

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years ago
Sungbo Eo 7e9c7e7b2d kirkwood: tidy up hwmon_fancontrol
Add indent and sort board_name alphabetically.

Sourcing /lib/functions.sh is already handled by /etc/rc.common. Drop the line.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years ago
Sungbo Eo 3124c9afe3 urngd: avoid PKG_NAME in define lines
> Avoid reuse of PKG_NAME in call, define and eval lines for consistency and
> readability. Write the full name instead.

Ref: https://openwrt.org/docs/guide-developer/packages

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years ago
Sungbo Eo 33ecc694d5 urandom-seed: avoid PKG_NAME in define lines
> Avoid reuse of PKG_NAME in call, define and eval lines for consistency and
> readability. Write the full name instead.

Ref: https://openwrt.org/docs/guide-developer/packages

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years ago
Sungbo Eo 1013b140a6 kirkwood: add kmod-hwmon-core to DEVICE_PACKAGES
kmod-hwmon-lm* will not get into images unless kmod-hwmon-core is added to
DEVICE_PACKAGES as well.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[only address kmod-hwmon-core in this commit]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years ago
Sungbo Eo 4528128b05 kirkwood: tidy up image Makefile
- use k in SIZE variables
- break long lines

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years ago
Sungbo Eo c24e01fccc kirkwood: fix device node name of Iomega ix2-200
The current device node name of ix2-200 is "iom_ix2_200", which results
in a SUPPORTED_DEVICES string "iom,ix2,200" that does not match the
compatible in DTS and the board name used in board.d.

Fix this by replacing the second underscore with a dash, following
vendor_model scheme.

Fixes: 27b2f0fc0f ("kirkwood: add support for Iomega Storcenter ix2-200")

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[commit title/message rephrase]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years ago
David Bauer 55c153538d ath79: fix TP-Link TL-WA901ND v2 PHY stuck in reset
Some newer bootloaders for the TP-Link TL-WA901ND put the ethernet PHY
in reset before loading the kernel, thus the LAN interface is not
working in OpenWrt.

Clear the reset to restore ethernet functionality.

Signed-off-by: David Bauer <mail@david-bauer.net>
4 years ago
Sungbo Eo 33c1d5eee4 x86: avoid underscore in package name
As 07e1d88d7b ("kernel: avoid underscore in *6lowpan package names") shows,
underscores might cause build failures. Replace underscore with dash.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years ago
Sungbo Eo e6c55d70f4 ltq-vdsl-mei: avoid underscore in package name
As 07e1d88d7b ("kernel: avoid underscore in *6lowpan package names") shows,
underscores might cause build failures. Replace underscore with dash.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years ago
Adrian Schmutzler 1173719817 ramips: move includes to DTSI for mt7628an_tplink_8m*
All devices inherited from mt7628an_tplink_8m.dtsi and
mt7628an_tplink_8m-split-uboot.dtsi contain the same additional
includes in the DTS files.

Move them to the DTSI files instead.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years ago
Adrian Schmutzler 1ae6292f75 ramips: move compatible for Ubiquiti Edgerouter X to DTS file
So far, the compatible for the Ubiquiti Edgerouter X has been
defined in the DTSI file and inherited for the edgerouterx.dts,
but overwritten for the edgerouterx-sfp.dts. In contrast, the
model was stored in the DTS file in both cases.

To resolve this somewhat confusing situation, move the compatible
with the device name for edgerouterx to the DTS file as well.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years ago
Adrian Schmutzler 963f572ead ramips: remove redundant includes in DTS files
Many DTS files contain the same includes again that are already
present in the DTSI files they are derived from.

Remove those redundant includes in the DTS files. For vocore, the
include is moved to the parent DTSI file.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years ago
Adrian Schmutzler a967ae9d14 ath79: remove redundant includes in DTS files
Many DTS files contain the same includes again that are already
present in the DTSI files they are derived from.

Remove those redundant includes in the DTS files.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years ago
Scott Roberts 34e7d31983 packages/boot: bump arm-trusted-firmware-mvebu version
The current version of ATF does not support power off for SGMII
COMPHY.  Update to latest ATF to resolve this issue.

Signed-off-by: Scott Roberts <ttocsr@gmail.com>
4 years ago
Fredrik Olofsson 9ad1ccbe15 mac80211: backport fix TID field in monitor mode transmit
Backport 753ffad3d6243303994227854d951ff5c70fa9e0 as merged in Linux v5.5-rc3.

Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
4 years ago
Martin Schiller 54e39ddc2e kernel: fix xt_connmark.h
Commit a1cfe0dcbb (kernel: connmark set-dscpmark follow upstreamimg
attempt") broke the usage of xt_connmark.h in user-space (e.g.
strongswan), because the BIT() macro is unknown there.

Fixes: a1cfe0dcbb (kernel: connmark set-dscpmark follow upstreamimg attempt")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
4 years ago
Daniel Engberg 53470bdf32 toolchain/binutils: Add binutils 2.34
Refresh patches
Drop 300-012_check_ldrunpath_length.patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
4 years ago
Daniel Engberg f0864cb31b package/utils/f2fs-tools: Update to 1.13.0
Update f2fs-tools to 1.13.0
Remove upstreamed patches
Disable build of static library

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
4 years ago
Aleksander Jan Bajkowski c6e33b7cb4 generic: refresh patches
just run: make target/linux/refresh V=s

Fixes: 6e315de0f4

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
4 years ago
Davide Fioravanti 9003115d6f usbmode: Update modeswitch data to 20191128
Add support for new hardware

Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
4 years ago
Aleksander Jan Bajkowski 84845123fe kernel: remove non-existant symbols from 4.19 config
These symbols only exist in kernel version <= 4.15

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
4 years ago
Tomasz Maciej Nowak 9c6b6abdcd kernel: replace SUBDIRS with M in package recipes
The SUBDIRS variable has been removed in kernel 5.4, and was deprecated
since the beginnig of kernel git history in favour of M or KBUILD_EXTMOD.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
4 years ago
DENG Qingfang e6cec17568 linux-firmware: update to 20200122
Update linux-firmware to 20200122

git log --pretty=oneline --abbrev-commit 20191215..20200122

1eb2408 linux-firmware: Update firmware file for Intel Bluetooth AX200
0dc1611 linux-firmware: Update firmware file for Intel Bluetooth AX201
d03f79c linux-firmware: Update firmware file for Intel Bluetooth 9560
aab62bc linux-firmware: Update firmware file for Intel Bluetooth 9260
ed0aa3a nvidia: add TU102/TU104/TU106 signed firmware
9c340bd amdgpu: update navi10 firmware for 19.50
3b4a503 amdgpu: Add navi10 TA ucode
16cc13a Merge branch 'v1.1.3' of https://github.com/ruiwang-mtk/linux_fw_vpu_v1.1.37f3177d mediatek: update MT8173 VPU firmware to v1.1.3
67d4ff5 Mellanox: Add new mlxsw_spectrum firmware xx.2000.2714
f1c9e7b radeon: update oland rlc microcode from amdgpu
b1dafb7 amdgpu: update vega20 microcode for 19.50
c38789e amdgpu: update vega12 microcode for 19.50
5a141c1 amdgpu: update vega10 microcode for 19.50
a03173a amdgpu: update picasso microcode for 19.50
86e9a5f amdgpu: update raven2 microcode for 19.50
febe09a amdgpu: update raven microcode for 19.50
af76fd0 amdgpu: update navi10 microcode for 19.50
b5b176a amdgpu: update navi14 microcode for 19.50
ad90178 amdgpu: add TA microcode for Raven asics
379551b qed: Add firmware 8.42.2.0
58b4003 Merge branch 'RB3-wlan-firmware-1387-v2' of https://github.com/andersson/linux-firmware
5967a45 Adjust WHENCE entry to check_whence doesn't complain
d1e743d Merge branch 'master' of https://github.com/NXP/mwifiex-firmware
d6219ab qcom: Switch SDM845 WLAN firmware
e65245c linux-firmware: add NXP firmware licence file
6871bff Merge branch 'ath10k-20191220' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware
b142c2e ath10k: WCN3990 hw1.0: add firmware WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
8809b87 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00070
513d70c ath10k: QCA988X hw2.0: update firmware-5.bin to 10.2.4-1.0-00047
203435b ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00070
a66d2fc ath10k: QCA9887 hw1.0: update firmware-5.bin to 10.2.4-1.0-00047
6d19154 ath10k: QCA6174 hw3.0: update board-2.bin
c4586ff linux-firmware: Update AMD cpu microcode

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years ago
DENG Qingfang b9d29b78c8 iw: update to 5.4
Update iw to 5.4
This increases the ipk size of iw-tiny/full by about 400 bytes

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years ago
Rosen Penev 499ebb791f libbsd: update to 0.10.0
Removed all upstream patches.

Added PKG_BUILD_PARALLEL for faster compilation.

Small Makefile rearrangements for consistency between packages.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
4 years ago
Hauke Mehrtens b951f53fba build: Add additional kernel debug options
Make it possible to activate some additional kernel debug options.
This can be used to debug some problems in kernel drivers.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
4 years ago