base-files: diag: restore default trigger for 'boot' LED

For devices without a dedicated 'diag' LED, we use sometimes one of
other LEDs for indicating at least 'boot', 'failsafe' and 'upgrade'
stages. In some cases, at the same time these LEDs have defined default
triggers in DTS using 'linux,default-trigger' property. Current 'diag'
setup removes the trigger and turns off 'boot' LED after bootup.

One of the examples of such device is TP-Link TL-WR841N v14 (ramips)
which uses 'wlan' LED with defined 'linux,default-trigger' for 'diag':

aliases {
        led-boot = &led_wlan;
        led-failsafe = &led_wlan;
        led-upgrade = &led_wlan;
};

[...]

led_wlan: wlan {
        label = "tl-wr841n-v14:green:wlan";
        gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
        linux,default-trigger = "phy0tpt";
};

This patch extends 'diag.sh' and 'leds.sh' scripts to make sure default
trigger defined in DTS is restored for 'diag' LED which isn't used for
indicating 'running' stage.

Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

package/base-files/Makefile

@@ -12,7 +12,7 @@ include $(INCLUDE_DIR)/version.mk
 include $(INCLUDE_DIR)/feeds.mk
 
 PKG_NAME:=base-files
-PKG_RELEASE:=213
+PKG_RELEASE:=214
 PKG_FLAGS:=nonshared
 
 PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/

package/base-files/files/etc/diag.sh

@@ -37,6 +37,8 @@ set_led_state() {
 		;;
 	done)
 		status_led_off
+		[ "$status_led" != "$running" ] && \
+			status_led_restore_trigger "boot"
 		[ -n "$running" ] && {
 			status_led="$running"
 			status_led_on

package/base-files/files/lib/functions/leds.sh

@@ -1,16 +1,24 @@
 #!/bin/sh
 # Copyright (C) 2013 OpenWrt.org
 
-get_dt_led() {
-	local label
+get_dt_led_path() {
 	local ledpath
 	local basepath="/proc/device-tree"
 	local nodepath="$basepath/aliases/led-$1"
 
 	[ -f "$nodepath" ] && ledpath=$(cat "$nodepath")
+	[ -n "$ledpath" ] && ledpath="$basepath$ledpath"
+
+	echo "$ledpath"
+}
+
+get_dt_led() {
+	local label
+	local ledpath=$(get_dt_led_path $1)
+
 	[ -n "$ledpath" ] && \
-		label=$(cat "$basepath$ledpath/label" 2>/dev/null) || \
-		label=$(cat "$basepath$ledpath/chan-name" 2>/dev/null)
+		label=$(cat "$ledpath/label" 2>/dev/null) || \
+		label=$(cat "$ledpath/chan-name" 2>/dev/null)
 
 	echo "$label"
 }
@@ -35,6 +43,17 @@ led_off() {
 	led_set_attr $1 "brightness" 0
 }
 
+status_led_restore_trigger() {
+	local trigger
+	local ledpath=$(get_dt_led_path $1)
+
+	[ -n "$ledpath" ] && \
+		trigger=$(cat "$ledpath/linux,default-trigger" 2>/dev/null)
+
+	[ -n "$trigger" ] && \
+		led_set_attr "$(get_dt_led $1)" "trigger" "$trigger"
+}
+
 status_led_set_timer() {
 	led_timer $status_led "$1" "$2"
 	[ -n "$status_led2" ] && led_timer $status_led2 "$1" "$2"