Commit Graph

87 Commits (b31108e0a8b1a747c07ddefbd688436e7d604830)

Author SHA1 Message Date
Gabor Juhos 39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
12 years ago
Gabor Juhos 1ab80c7817 ramips: rt305x: add support for the UR-336UN board
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31451
12 years ago
Gabor Juhos 3626444c6d ramips: rt305x: add support for the Asus WL-330N3G board
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31450
12 years ago
Gabor Juhos 5024ffb976 ramips: nuke 3.2 suport
SVN-Revision: 31405
12 years ago
Gabor Juhos 5c325b0057 ramips: add support for 3.3
SVN-Revision: 31403
12 years ago
Gabor Juhos fc88a363c0 ramips: rt305x: add initial support for Tenda W306R V2.0
More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

SVN-Revision: 31396
12 years ago
Gabor Juhos 88b5827c52 ramips: remove hardcoded console parameter from kernel configs
SVN-Revision: 31395
12 years ago
Jo-Philipp Wich e9c4d3d1f2 ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation
SVN-Revision: 31144
12 years ago
Gabor Juhos e4e24c5512 ramips: rt305x: add add support for the Asus WL-330N board
[juhosg: reorder several lines in order to keep things sorted
alphabetically]

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31100
12 years ago
Gabor Juhos 18f7081e17 ramips: rt305x: add profile for the AZtech HW-5503G board
Patch from #11085.

SVN-Revision: 30907
13 years ago
Gabor Juhos 0e486d2fd2 ramips: add support for unbranded XDX-RN502J board
This patch adds support for routers using a PCB marked XDX-RN502J
V2.0, such as some unbranded routers like this:

http://www.mediafire.com/?8acv87h6snn9fj6
http://www.mediafire.com/?do7xonw7scor4kn
http://www.mediafire.com/?1ad49zvx3e7jyix
http://www.mediafire.com/?i46cqiq66maa197

http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html

some reports also state the Aceex 22Y uses the same board.

more information can be found in the following openwrt forum post
https://forum.openwrt.org/viewtopic.php?id=34878

[juhosg: fix checkpatch warnings, use the GENERIC_4M template]

Signed-off-by: bruno schwander <bruno@tinkerbox.org>

SVN-Revision: 30809
13 years ago
Gabor Juhos 44c8b396f9 ramips: board support for Asus RT-N10+
[juhosg: fix indentation in platform scripts, and remove debug
messages from 06_set_iface_mac]

Signed-off-by: Patrick van Staveren <trick@vanstaveren.us>

SVN-Revision: 30808
13 years ago
Gabor Juhos 214216c04d ramips: raeth: add debugfs support
SVN-Revision: 30680
13 years ago
Gabor Juhos 3ba0f4e1ca ramips: move the ethernet driver into a separate directory
Also clean up the Kconfig symbols.

SVN-Revision: 30670
13 years ago
Gabor Juhos 18fdaee00b ramips: nuke 2.6.39 support
SVN-Revision: 30651
13 years ago
Gabor Juhos 3489515a7e ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router
[juhosg:
- don't switch back to 2.6.39
- update config-3.2
- change machine id to SL-R7205
- reorder case entries in platform scripts
- remove button hotplug script]

Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com>

SVN-Revision: 30645
13 years ago
Gabor Juhos e532fa5fd4 ramips: add preliminary support for the RT3662/RT3883 SoCs
SVN-Revision: 30495
13 years ago
Gabor Juhos a287c60a61 ramips: add initial support for 3.2
SVN-Revision: 30476
13 years ago
Gabor Juhos 8916c02b47 ramips: raeth: make debugging messages configurable
SVN-Revision: 30450
13 years ago
Gabor Juhos 9cde29f1a7 ramips: rt305x: add support for Accton WR6202 / SMCWBR11S-3GN
This patch adds support for the Accton WR6202 Mini 3G broadband router.
Full details for this device are available at
http://www.awbnetworks.com/products03.php?Fullkey=19.

This device is identical to the SMCWBR11S-3GN:
http://www.smc-asia.com/products03.php?Fullkey=210

It's also worth noting that this board has a GPIO line to control the
power to the USB port.

[juhosg:
 - fix checkpatch warnings,
 - reorder Kconfig entry,
 - merge the sysupgrade patch,
 - add GPL header]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 30434
13 years ago
Gabor Juhos 7298ef2456 ramips: rt305x: add profile for the Belkin f5d8235v2
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 30432
13 years ago
Gabor Juhos b3fdd931d1 ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.

There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.

Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt

[juhosg: reordered some parts in order to keep things sorted
alphabetically]

Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>

SVN-Revision: 29910
13 years ago
Gabor Juhos 1932a7205c ramips: add kernel support for ALL0256N
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 29882
13 years ago
Gabor Juhos 98437278c4 ramips: rt305x: add support for the ALFA Networks W502U (R36) board
SVN-Revision: 29615
13 years ago
Gabor Juhos 7b1e525b56 ramips: initial support for Sitecom WL-351 v1 002
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 29604
13 years ago
Gabor Juhos 2cb946f5b4 ramips: add support for the Senao/EnGenius ESR-9753 board
Signed-off-by: Artur Wronowski <arteqw@gmail.com>

SVN-Revision: 29603
13 years ago
Gabor Juhos 0c38d36488 ramips: add support for Omnima MiniEMBWiFi board
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

SVN-Revision: 29533
13 years ago
Gabor Juhos 2ed38b24a8 ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 29378
13 years ago
Gabor Juhos ee8077f0fe ramips: Support for NexAira BC2
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]

Signed-off-by: Adam Porter <porter.adam at gmail.com>

SVN-Revision: 28571
13 years ago
Gabor Juhos 72e117ec79 ramips: rt305x: add support for the ZyXEL NBG-419N board
SVN-Revision: 28078
13 years ago
Gabor Juhos 9085b05d9e ramips: rt305x: support for wr512-3gn-like routers
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28052
13 years ago
Gabor Juhos e1b176de82 ramips: rt305x: add some USB modules to the default profile
SVN-Revision: 27999
13 years ago
Gabor Juhos 169d68c98c ramips: rt305x: add dwc_otg driver
Based on a patch by Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27997
13 years ago
Gabor Juhos 6ef87ff5e6 ramips: sync kernel config
SVN-Revision: 27993
13 years ago
Gabor Juhos a3c7e71ae1 ramips: add support for Argus ATP-52B
[The ESW related changes has been removed - juhosg]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27991
13 years ago
Gabor Juhos ea211c4d90 ramips: rt305x: add support for the Netcore NW718 board
SVN-Revision: 27813
13 years ago
Gabor Juhos 437e184484 ramips: rt305x: add support for the Asus RT-G32 B1 board
Based on a patch by: Sergiy <piratfm@gmail.com>

SVN-Revision: 27812
13 years ago
Gabor Juhos 7193f29d96 ramips: rt305x: enable M25P80 driver
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27811
13 years ago
Gabor Juhos 57122e7ccc ramips: add SPI controller driver
Based on a patch by Sergiy <piratfm@gmail.com>

SVN-Revision: 27809
13 years ago
Gabor Juhos 646f64d389 ramips: remove 2.6.37 stuff
SVN-Revision: 27398
13 years ago
Gabor Juhos 0fde070cf9 ramips: add 2.6.39 support
Based on the patches from #9625

SVN-Revision: 27396
13 years ago
Gabor Juhos d5a7e2f5c1 ramips: initial board support for MOFI3500-3GN
This patch adds initial board support for the MoFi Network MOFI3500-3GN
(Ralink RT3052F SoC, 8MB flash, 32MB ram, wireless N, USB-OTG).  This
router is basically the NA version of the HW550-3G.

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26466
13 years ago
Gabor Juhos 87f5872f35 ramips: remove 2.6.36 stuff
SVN-Revision: 26329
13 years ago
Gabor Juhos 90d37adb8d ramips: switch to 2.6.37
SVN-Revision: 26328
13 years ago
Gabor Juhos 23518bb2e4 ramips: initial board support for Aztech HW550-3G
This patch adds initial support for the Aztech HW550-3G (Ralink
RT3052f SoC, 8MB flash, 32MB dram).  Ethernet is not working yet.
Wireless appears to work fine.  USB does not work yet (as with other
Ralink boards).

Signed-off-by: Layne Edwards <ledwards76@gmail.com>

SVN-Revision: 26123
14 years ago
Gabor Juhos 16366feafb ramips: add watchdog driver
SVN-Revision: 25126
14 years ago
Gabor Juhos d2fdd1dbe1 ramips: remove 2.6.3[24] support
SVN-Revision: 24562
14 years ago
Gabor Juhos 0449d92dd7 ramips: add support for 2.6.36
SVN-Revision: 24270
14 years ago
Gabor Juhos 01a5cb48c8 ramips: default profile fix
Fix package names in default profiles.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24269
14 years ago
Gabor Juhos 21c8d63505 ramips: add support for Belkin F5D8235 v2 board
No support for usb for now.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 24126
14 years ago