ramips: rt305x: add support for the Netcore NW718 board

SVN-Revision: 27813
v19.07.3_mercusys_ac12_duma
Gabor Juhos 13 years ago
parent 437e184484
commit ea211c4d90

@ -42,6 +42,9 @@ get_status_led() {
mofi3500-3gn)
status_led="mofi3500-3gn:green:status"
;;
nw718)
status_led="nw718:amber:cpu"
;;
pwh2004)
status_led="pwh2004:green:power"
;;

@ -46,6 +46,7 @@ case "$FIRMWARE" in
hw550-3g | \
mofi3500-3gn | \
pwh2004 | \
nw718 | \
rt-n15 | \
v22rw-2x2 | \
wcr150gn | \

@ -31,6 +31,9 @@ ramips_board_name() {
*"MoFi Network MOFI3500-3GN")
name="mofi3500-3gn"
;;
*"NW718")
name="nw718"
;;
*"PWH2004")
name="pwh2004"
;;

@ -14,7 +14,7 @@ platform_check_image() {
[ "$ARGC" -gt 1 ] && return 1
case "$board" in
dir-300-b1 | dir-600-b1 | dir-600-b2 | fonera20n | rt-g32-b1 | v22rw-2x2 | whr-g300n | hw550-3g | mofi3500-3gn)
dir-300-b1 | dir-600-b1 | dir-600-b2 | fonera20n | nw718 | rt-g32-b1 | v22rw-2x2 | whr-g300n | hw550-3g | mofi3500-3gn)
[ "$magic" != "2705" ] && {
echo "Invalid image type."
return 1

@ -22,6 +22,7 @@ enum ramips_mach_type {
RAMIPS_MACH_DIR_600_B1, /* D-Link DIR-600 B1 */
RAMIPS_MACH_DIR_600_B2, /* D-Link DIR-600 B2 */
RAMIPS_MACH_RT_G32_B1, /* Asus RT-G32 B1 */
RAMIPS_MACH_NW718, /* Netcore NW718 */
/* RT3052 based machines */
RAMIPS_MACH_F5D8235_V2, /* Belkin F5D8235 v2 */

@ -43,6 +43,12 @@ config RT305X_MACH_MOFI3500_3GN
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_NW718
bool "Netcore NW718"
default y
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_PWH2004
bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"
default y

@ -16,6 +16,7 @@ obj-$(CONFIG_RT305X_MACH_F5D8235_V2) += mach-f5d8235-v2.o
obj-$(CONFIG_RT305X_MACH_FONERA20N) += mach-fonera20n.o
obj-$(CONFIG_RT305X_MACH_HW550_3G) += mach-hw550-3g.o
obj-$(CONFIG_RT305X_MACH_MOFI3500_3GN) += mach-mofi3500-3gn.o
obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o
obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o
obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o
obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o

@ -0,0 +1,143 @@
/*
* Netcore NW718 board support
*
* Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
#include "devices.h"
#define NW718_GPIO_LED_USB 8
#define NW718_GPIO_LED_CPU 13
#define NW718_GPIO_LED_WPS 14
#define NW718_GPIO_BUTTON_WPS 0
#define NW718_GPIO_BUTTON_RESET 10
#define NW718_GPIO_SPI_CS0 3
#define NW718_GPIO_SPI_SCK 4
#define NW718_GPIO_SPI_MOSI 5
#define NW718_GPIO_SPI_MISO 6
#define NW718_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition nw718_partitions[] = {
{
.name = "u-boot",
.offset = 0,
.size = 0x030000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "config",
.offset = 0x030000,
.size = 0x020000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "factory",
.offset = 0x050000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = 0x060000,
.size = 0x090000,
}, {
.name = "rootfs",
.offset = 0x150000,
.size = 0x2b0000,
}, {
.name = "firmware",
.offset = 0x060000,
.size = 0x3a0000,
}
};
#define nw718_nr_parts ARRAY_SIZE(nw718_partitions)
#else
#define nw718_nr_parts 0
#define nw718_partitions NULL
#endif /* CONFIG_MTD_PARTITIONS */
static struct flash_platform_data nw718_flash_data = {
.nr_parts = nw718_nr_parts,
.parts = nw718_partitions,
};
static struct gpio_led nw718_leds_gpio[] __initdata = {
{
.name = "nw718:amber:cpu",
.gpio = NW718_GPIO_LED_CPU,
.active_low = 1,
}, {
.name = "nw718:amber:usb",
.gpio = NW718_GPIO_LED_USB,
.active_low = 1,
}, {
.name = "nw718:amber:wps",
.gpio = NW718_GPIO_LED_WPS,
.active_low = 1,
}
};
static struct gpio_button nw718_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.threshold = 3,
.gpio = NW718_GPIO_BUTTON_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.threshold = 3,
.gpio = NW718_GPIO_BUTTON_WPS,
.active_low = 1,
}
};
static struct spi_board_info nw718_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p80",
.platform_data = &nw718_flash_data,
.controller_data = (void *) NW718_GPIO_SPI_CS0,
}
};
static void __init nw718_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_I2C |
RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(nw718_leds_gpio),
nw718_leds_gpio);
ramips_register_gpio_buttons(-1, NW718_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(nw718_gpio_buttons),
nw718_gpio_buttons);
rt305x_register_wifi();
rt305x_register_wdt();
rt305x_register_spi(nw718_spi_info, ARRAY_SIZE(nw718_spi_info));
}
MIPS_MACHINE(RAMIPS_MACH_WHR_G300N, "NW718", "Netcore NW718", nw718_init);

@ -89,6 +89,24 @@ define BuildFirmware/Buffalo
fi; fi
endef
define BuildFirmware/NW718
$(call PatchKernelLzma,$(2),$(3) $($(4)))
mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \
-n "ARA1B4NCRNW718;1" \
-d "$(KDIR)/vmlinux-$(2).bin.lzma" \
"$(KDIR)/vmlinux-$(2).uImage"
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \
else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big"; \
else \
( \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
) > $(call imgname,$(1),$(2))-factory.bin; \
fi; fi
endef
mtdlayout_4M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware)
define Image/Build/Template/GENERIC_4M
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_4M,851968,3014656)
@ -109,6 +127,12 @@ define Image/Build/Template/DIR300B1
-o $(call imgname,$(1),$(2))-factory.bin
endef
mtdlayout_nw718=mtdparts=spi0.0:192k(u-boot)ro,128k(config)ro,64k(factory)ro,832k(kernel),2880k(rootfs),3712k@0x60000(firmware)
define Image/Build/Template/NW718
$(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
$(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
endef
define Image/Build/Profile/DIR300B1
$(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
$(call Image/Build/Template/DIR300B1,$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
@ -130,6 +154,10 @@ define Image/Build/Profile/FONERA20N
$(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N)
endef
define Image/Build/Profile/NW718
$(call Image/Build/Template/NW718,$(1),nw718,NW718)
endef
define Image/Build/Profile/PWH2004
$(call Image/Build/Template/GENERIC_8M,$(1),pwh2004,PWH2004)
endef
@ -189,6 +217,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/RTG32B1,$(1))
$(call Image/Build/Profile/FONERA20N,$(1))
$(call Image/Build/Profile/V22RW2X2,$(1))
$(call Image/Build/Profile/NW718,$(1))
$(call Image/Build/Profile/PWH2004,$(1))
$(call Image/Build/Profile/WHRG300N,$(1))
$(call Image/Build/Profile/WCR150GN,$(1))

@ -96,6 +96,7 @@ CONFIG_RT305X_MACH_F5D8235_V2=y
CONFIG_RT305X_MACH_FONERA20N=y
CONFIG_RT305X_MACH_HW550_3G=y
CONFIG_RT305X_MACH_MOFI3500_3GN=y
CONFIG_RT305X_MACH_NW718=y
CONFIG_RT305X_MACH_PWH2004=y
CONFIG_RT305X_MACH_RT_G32_REVB=y
CONFIG_RT305X_MACH_V22RW_2X2=y

Loading…
Cancel
Save