ramips: board support for Asus RT-N10+

[juhosg: fix indentation in platform scripts, and remove debug
messages from 06_set_iface_mac]

Signed-off-by: Patrick van Staveren <trick@vanstaveren.us>

SVN-Revision: 30808
v19.07.3_mercusys_ac12_duma
Gabor Juhos 12 years ago
parent 8533636d2d
commit 44c8b396f9

@ -66,6 +66,9 @@ get_status_led() {
rt-n15)
status_led="rt-n15:blue:power"
;;
rt-n10-plus)
status_led="asus:green:wps"
;;
rt-n56u)
status_led="asus:blue:power"
;;

@ -38,6 +38,7 @@ case "$FIRMWARE" in
rt2x00_eeprom_extract "devdata" 16384 272
;;
rt-n10-plus | \
rt-g32-b1)
rt2x00_eeprom_extract "devconf" 0 272
;;

@ -36,6 +36,10 @@ preinit_set_mac_address() {
mac=$(ramips_get_mac_binary board-nvram 65440)
ifconfig eth0 hw ether $mac 2>/dev/null
;;
rt-n10-plus)
mac=$(ramips_get_mac_binary devconf 4)
ifconfig eth0 hw ether $mac 2>/dev/null
;;
esac
}

@ -98,6 +98,9 @@ ramips_board_name() {
*"RT-G32 B1")
name="rt-g32-b1"
;;
*"RT-N10+")
name="rt-n10-plus"
;;
*"RT-N15")
name="rt-n15"
;;

@ -27,6 +27,7 @@ platform_check_image() {
nw718 | \
omni-emb | \
rt-g32-b1 | \
rt-n10-plus | \
rt-n15 | \
rt-n56u | \
sl-r7205 | \

@ -26,6 +26,7 @@ enum ramips_mach_type {
RAMIPS_MACH_DIR_600_B1, /* D-Link DIR-600 B1 */
RAMIPS_MACH_DIR_600_B2, /* D-Link DIR-600 B2 */
RAMIPS_MACH_RT_G32_B1, /* Asus RT-G32 B1 */
RAMIPS_MACH_RT_N10_PLUS, /* Asus RT-N10+ */
RAMIPS_MACH_NW718, /* Netcore NW718 */
/* RT3052 based machines */

@ -26,6 +26,11 @@ config RT305X_MACH_RT_G32_REVB
bool "Asus RT-G32 revB board support"
select RALINK_DEV_GPIO_BUTTONS
config RT305X_MACH_RT_N10_PLUS
bool "Asus RT-N10+ board support"
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_HW550_3G
bool "Aztech HW550-3G support"
select RALINK_DEV_GPIO_BUTTONS

@ -25,6 +25,7 @@ obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o
obj-$(CONFIG_RT305X_MACH_OMNI_EMB) += mach-omni-emb.o
obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o
obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o
obj-$(CONFIG_RT305X_MACH_RT_N10_PLUS) += mach-rt-n10-plus.o
obj-$(CONFIG_RT305X_MACH_SL_R7205) += mach-sl-r7205.o
obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o
obj-$(CONFIG_RT305X_MACH_W502U) += mach-w502u.o

@ -0,0 +1,74 @@
/*
* ASUS RT-N10+ board support
*
* Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
#include "devices.h"
#define RT_N10_PLUS_GPIO_LED_WPS 14
#define RT_N10_PLUS_GPIO_BUTTON_WPS 0 /* active low */
#define RT_N10_PLUS_GPIO_BUTTON_RESET 10 /* active low */
#define RT_N10_PLUS_KEYS_POLL_INTERVAL 20
#define RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL (3 * RT_N10_PLUS_KEYS_POLL_INTERVAL)
static struct gpio_led rt_n10_plus_leds_gpio[] __initdata = {
{
.name = "asus:green:wps",
.gpio = RT_N10_PLUS_GPIO_LED_WPS,
.active_low = 1,
}
};
static struct gpio_keys_button rt_n10_plus_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL,
.gpio = RT_N10_PLUS_GPIO_BUTTON_RESET,
.active_low = 1,
}, {
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = RT_N10_PLUS_KEYS_DEBOUNCE_INTERVAL,
.gpio = RT_N10_PLUS_GPIO_BUTTON_WPS,
.active_low = 1,
}
};
static void __init rt_n10_plus_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_flash(0);
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n10_plus_leds_gpio),
rt_n10_plus_leds_gpio);
ramips_register_gpio_buttons(-1, RT_N10_PLUS_KEYS_POLL_INTERVAL,
ARRAY_SIZE(rt_n10_plus_gpio_buttons),
rt_n10_plus_gpio_buttons);
rt305x_register_wifi();
rt305x_register_wdt();
}
MIPS_MACHINE(RAMIPS_MACH_RT_N10_PLUS, "RT-N10-PLUS", "Asus RT-N10+",
rt_n10_plus_init);

@ -205,6 +205,13 @@ define BuildFirmware/RTG32B1
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/spi,$(mtdlayout_rtg32b1)),$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size))
endef
mtdlayout_rtn10plus=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
mtd_rtn10plus_kernel_part_size=917504
mtd_rtn10plus_rootfs_part_size=2949120
define BuildFirmware/RTN10PLUS
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_rtn10plus)),$(mtd_rtn10plus_kernel_part_size),$(mtd_rtn10plus_rootfs_part_size))
endef
mtdlayout_whrg300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
define BuildFirmware/WHRG300N
$(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600,phys)
@ -343,6 +350,10 @@ define Image/Build/Profile/RTG32B1
$(call Image/Build/Template/$(fs_squash)/$(1),RTG32B1,rt-g32-b1,RT-G32-B1)
endef
define Image/Build/Profile/RTN10PLUS
$(call Image/Build/Template/$(fs_squash)/$(1),RTN10PLUS,rt-n10-plus,RT-N10-PLUS)
endef
define Image/Build/Profile/SLR7205
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,sl-r7205,SL-R7205,ttyS1,57600,phys)
endef
@ -388,6 +399,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/DIR300B1,$(1))
$(call Image/Build/Profile/ESR9753,$(1))
$(call Image/Build/Profile/F5D8235V2,$(1))
$(call Image/Build/Profile/RTN10PLUS,$(1))
$(call Image/Build/Profile/FONERA20N,$(1))
$(call Image/Build/Profile/HW5503G,$(1))
$(call Image/Build/Profile/MOFI35003GN,$(1))

@ -107,6 +107,7 @@ CONFIG_RT305X_MACH_NW718=y
CONFIG_RT305X_MACH_OMNI_EMB=y
CONFIG_RT305X_MACH_PWH2004=y
CONFIG_RT305X_MACH_RT_G32_REVB=y
CONFIG_RT305X_MACH_RT_N10_PLUS=y
CONFIG_RT305X_MACH_SL_R7205=y
CONFIG_RT305X_MACH_V22RW_2X2=y
CONFIG_RT305X_MACH_W502U=y

Loading…
Cancel
Save