773ce8c319
broadcom-diag: add support for bcma
...
SVN-Revision: 27905
13 years ago
b220442c75
switch: update for brcm47xx target
...
* remove suport for 2.4 kernel
* add support for bcma bus
SVN-Revision: 27904
13 years ago
695cef4f45
rtc-rv5c386a: add support for kernel 3.0
...
remove BKL and adds support for changes in bcm47xx code
SVN-Revision: 27903
13 years ago
8428ebd8e8
brcm47xx: update patches
...
* this adds sflash support for ssb devices
* the flash is now a platform device
* minor updates
SVN-Revision: 27902
13 years ago
353639cdd9
ath9k: add missing chunk to the BlockAckReq fix (fixes a compile error)
...
SVN-Revision: 27891
13 years ago
e9aaa9061f
ath9k: add some code to control internal driver queue length limits
...
SVN-Revision: 27890
13 years ago
cdc70d84ce
ath9k: reduce the number of software retries, include hardware a-mpdu retries in retry counting
...
SVN-Revision: 27889
13 years ago
e7174f44b7
ath9k: rework handling of sending BlockAckReq frames, should hopefully lead to fewer latency spikes
...
SVN-Revision: 27888
13 years ago
61e2e03311
kernel: Fix firewire for 2.6.37+
...
The old ieee1394 stack was removed in 2.6.37. The new firewire stack is
available for all kernel versions, but experimental for the older one, so
make both available where appropriate.
SVN-Revision: 27874
13 years ago
e79f073de9
mac80211: fix a compiler warning
...
SVN-Revision: 27870
13 years ago
c330325bda
broadcom-wl: fix setup of virtual interfaces (patch by Nathan Hintz)
...
SVN-Revision: 27868
13 years ago
901618c68d
perf: mark as broken for now
...
Until we properly deal with the various versions of libelf we package,
mark perf as broken
SVN-Revision: 27867
13 years ago
9f3aea65fc
mac80211: add missing chunks to the compat_firmware_class change
...
SVN-Revision: 27864
13 years ago
21dd9478d7
mac80211: move compat_firmware_class.ko into compat.ko ( fixes #9864 )
...
SVN-Revision: 27863
13 years ago
0cd8805b0a
kernel/modules: Add missing config symbol
...
SVN-Revision: 27862
13 years ago
d3f4416d58
ath9k: prevent the aggregation code from sending packets to sleeping stations - should fix some latency issues
...
SVN-Revision: 27861
13 years ago
a1e19186fa
ath9k: fold patches that were merged upstream into 300-pending_work.patch
...
SVN-Revision: 27860
13 years ago
478decc60b
gdb: add dependency to libexpat when present
...
Also prevent gdb from trying to link against the host's libexpat.
SVN-Revision: 27859
13 years ago
eb90f30ce7
package/kernel: move kmod-fs-mbcache into fs-ext4
...
mbcache is only needed if xattr support is enabled, but this is only true
for ext4 on 2.6.37+, so just bundle it with ext4 when needed.
SVN-Revision: 27849
13 years ago
8fc2981bcd
dropbear: - split port argument at the rightmost colon, allows binding to specific IPv6 addresses - don't use uci ipaddr var but resolve ifname and get addresses from it ( #9853 )
...
SVN-Revision: 27843
13 years ago
26fed98ce6
qos-scripts: disable by default
...
SVN-Revision: 27832
13 years ago
35463493e8
hostapd: fix a compile issue when compiling wpa_supplicant ( fixes #9837 )
...
SVN-Revision: 27830
13 years ago
a5edb705b4
ath9k: fix switching channel bandwidth from 5/10 back to 20mhz
...
SVN-Revision: 27827
13 years ago
32868c1a00
hostapd: fix wds interface address handling for multi-bssid
...
SVN-Revision: 27823
13 years ago
3712ca3f9b
hostapd: use a timeout of 1000ms instead of 100ms for the first gtk rekey eapol frame
...
SVN-Revision: 27822
13 years ago
2e339a6466
swconfig: fix backward compatibility
...
swconfig fails to load uci configuration after the generic switch
identifier changes.
root@OpenWrt:/# uci show network | grep switch
network.@switch[0]=switch
network.@switch[0].name=eth0
network.@switch[0].reset=1
network.@switch[0].enable_vlan=1
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device=eth0
network.@switch_vlan[0].vlan=1
network.@switch_vlan[0].ports=0t 2 3 4 5
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device=eth0
network.@switch_vlan[1].vlan=2
network.@switch_vlan[1].ports=0t 1
root@OpenWrt:/# swconfig dev eth0 load /etc/config/network
Failed to apply configuration for switch 'switch0'
root@OpenWrt:/# swconfig dev switch0 load /etc/config/network
Failed to apply configuration for switch 'switch0'
SVN-Revision: 27820
13 years ago
4dd9373b3e
ppp: remove zero-length patches
...
SVN-Revision: 27819
13 years ago
4c4da37c09
ppp: version bump to 2.4.5
...
Bump to the current version of PPP.
A few of the patches are either in 2.4.5 or something functionally equivalent is, so those patches were removed.
1 patch was added to accommodate pppol2pv3_addr which is referenced in a linux kernel header file, but isn't defined in the kernel header files packaged with PPP.
Redux: re-instate the commenting out of the exponential back-off as requested by Felix.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27818
13 years ago
eaa935658b
swconfig: Add generic switch identifiers
...
Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.
SVN-Revision: 27800
13 years ago
8ff7756e82
base-files: warn when calling /etc/init.d/<script> enable and neither START nor STOP is defined
...
SVN-Revision: 27797
13 years ago
7a206885df
firewall: prevent redundant rules if multiple ports and multiple icmp types are given in a rule block for both icmp and other protocols
...
SVN-Revision: 27792
13 years ago
d6431df9c1
ath9k: rework tx power handling - display the correct *current* tx power, and also fix tx power limits with ATH_USER_REGD set
...
SVN-Revision: 27788
13 years ago
d0cea742bb
mac80211: merge a few pending fixes for channel switch handling
...
SVN-Revision: 27783
13 years ago
20d62f8e5f
linux-atm: don't fail if an PREFIX env var is set
...
SVN-Revision: 27779
13 years ago
94c728dc39
base-files: use "reboot -f" after sysupgrade to prevent executing deleted init scripts
...
SVN-Revision: 27776
13 years ago
1266eb49ee
mac80211: rename a misnamed patch
...
SVN-Revision: 27769
13 years ago
b87d25ea75
mac80211: remove the ccmp rx pn workaround, it should no longer be necessary and it was reported to cause connection stability issues (see #9646 )
...
SVN-Revision: 27764
13 years ago
866a22dc67
kernel: crypto: fix spelling
...
SVN-Revision: 27757
13 years ago
00dd85d8f6
ocf-linux: version bump to 20110720
...
Fixes problem with TFM allocation in cryptosoft.c
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Hauke:
* remove ubsec_ssb package and take it from ocf-linux
* use patches from ocf-linux package
* refresh all patches
* readd some build fixes for OpenWrt.
* readd CRYPTO_MANAGER dependency
SVN-Revision: 27753
13 years ago
8ecad9c51a
broadcom-wl: give the 007 patch a more meaningful name
...
SVN-Revision: 27752
13 years ago
1d7ae4aba7
broadcom-wl: make it work on the RT-N16 and other device using the BCMA bus - refresh and reorder patches - introduce a unified BCMA/SSB glue driver to accomodate for both bus types on brcm47xx - extend wlunbind init script to detach device from bcma-pci-bridge as well
...
SVN-Revision: 27751
13 years ago
0df7ae0418
mac80211: do not build bcma from compat-wireless
...
SVN-Revision: 27750
13 years ago
aa37b9656d
mac80211: fix typo and make broken options depend on BROKEN
...
SVN-Revision: 27735
13 years ago
96b6f27271
mca80211: add support for b43 on bcma bus.
...
This makes b43 work on broadcom SoCs using bcma as system bus.
SVN-Revision: 27734
13 years ago
0390780c34
kernel: add bcma package
...
SVN-Revision: 27732
13 years ago
365f76551a
base-files: attempt bring up related wifi devices when calling ifup If a user invoked /sbin/ifup to bring up an interface, the setup used to fail in case of wireless networks tied to a non-bridged interface definition. Likewise, the bringup of "lan" in the default configuration will reinitialize the bridge but do not re-join the wireless network to it, requiring an extra call to /sbin/wifi (which might not be possible anymore due to a severed link if connected wirelessly).
...
The changeset modifies the "ifup" command to search for related wireless
devices and call "wifi up" on them if applicable. This way the commands for
wireless and non-wireless interfaces are unified from a cli point of view.
The "ifup -a" case has not been changed to keep the logic of the
/etc/init.d/network boot sequence. This might be changed later.
Solves #9763 .
SVN-Revision: 27720
13 years ago
90ac92e8be
firewall: fix serious bug in state var handling ( #9746 )
...
SVN-Revision: 27711
13 years ago
49b905a2cf
comgt: clean up patch, rename gcom binary to comgt, but add a compatibility symlink
...
SVN-Revision: 27699
13 years ago
60d593c2d7
uci: fix one more unused-but-set issue ( #9731 )
...
SVN-Revision: 27698
13 years ago
9c606eb4c5
uhttpd: pass feature flags ( #9742 )
...
SVN-Revision: 27689
13 years ago
Hauke Mehrtens
Felix Fietkau
Jonas Gorski
Florian Fainelli
Vasilis Tsiligiannis
Jo-Philipp Wich
Gabor Juhos