Commit Graph

44034 Commits (a18d41996ebfbbed0598d589e8b381d60aac802b)
 

Author SHA1 Message Date
Daniel Golle a18d41996e tools: tar: update to version 1.32
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5 years ago
Hans Dedecker b04c9a1ffc nghttp2: bump to 1.37.0
cfb47d30 Take into account larger frame size for prioritization
dbbe4e01 Remove unused field
371bc3a8 clang-format
5e7889c5 Update manual pages
b1b2ad50 Bump up version number to 1.37.0, LT revision to 31:2:17
e043ca83 Update AUTHORS
c2434dfb Simplify stream_less
816ad210 Reuse name when indexing header by referencing dynamic table
f5feb16e Merge pull request #1295 from bratkartoffel/fix-compile-boringssl
adf09f21 Merge pull request #1303 from donny-dont/fix-shared-install
2591960e Explicitly set install location when building shared libs
d93842db nghttpx: Fix backend stall if header and request body are sent in 2 packets
8dc2b263 nghttpx: Use std::priority_queue
8d842701 Update manual pages
de85b0fd Update README
5d6beed5 Merge branch 'nghttpx-backend-weight'
1ff9de4c nghttpx: Backend address selection with weight
34482ed4 Fix compilation with boringssl
9b6ced66 Bump up version number to 1.37.0-DEV

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years ago
Hauke Mehrtens a18e2994df lantiq: Refresh kernel 4.14 configuration
This adds two configuration options which are getting automatically
added.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years ago
Hauke Mehrtens 26af8e48d3 linux-atm: Fix compile problem with kernel 4.20
This fixes the following compile problem with kernel 4.20:

In file included from arp.c:20:0:
include/linux/if_arp.h:121:16: error: 'IFNAMSIZ' undeclared here (not in a function)
  char  arp_dev[IFNAMSIZ];
                ^~~~~~~~
make[7]: *** [Makefile:459: arp.o] Error 1

This is caused by commit 6a12709da354 ("net: if_arp: use define instead
of hard-coded value") in the upstream Linux kernel which is integrated
in Linux 4.20.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years ago
Daniel Golle 8f9155fe7a oxnas: fix PCIe register ranges in device-tree
They should be relative to apb-bridge@47000000 rather than to the
pcie-controller@c00000 inside it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5 years ago
Mathew McBride 6a2705a52f layerscape: use wrapped nand_do_upgrade for traverse-ls1043 boards
Traverse LS1043 boards are set up with a dual-system layout, rootfs{1,2} and kernel{1,2}.
nand_do_upgrade can do the image replacement work we were doing before as long as we give it the partition names.
This greatly simplifies the /lib/upgrade/platform.sh.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
5 years ago
Mathew McBride 17468cc090 layerscape: rename Traverse boards along SoC lines
Upcoming product specification and branding changes mean that the names in tree do not accurately reflect released products.
To reduce any confusion, sort our boards by SoC family, e.g traverse-ls1043. Any future boards using Layerscape family SoC's
will be treated the same way, e.g Device/traverse-ls/lx/laXXXX.
The affected boards so far have only been available through OEM channels and those aren't using the provided sysupgrade.

Signed-off-by: Mathew McBride <matt@traverse.com.au>
5 years ago
Moritz Warning 3d3e04d8c8 wolfssl: fix build in busybox environments
The configure script broke when used in alpine-3.9 based docker containers. Fixed in wolfSSL >3.15.7.

Signed-off-by: Moritz Warning <moritzwarning@web.de>
5 years ago
Moritz Warning 7fc4dd3611 cmake: match warnings more strictly in C++ feature checks
Require the word "warning" to appear at the start of a line, after
whitespace, or after a `:`.  This is the same that CTest launchers use
to match warnings.  It avoids matching "warning" inside file paths.
Fixed in cmake 3.14.0.

Signed-off-by: Moritz Warning <moritzwarning@web.de>
5 years ago
Martin Schiller ff3cfe0848 ltq-atm/ltq-ptm: re-enable/fix reset_ppe() functionality for VR9
This patch re-enables the reset_ppe() functionality for VR9 targets by using
the new lantiq rcu subsystem. The reset sequence in the reset_ppe() function
was taken from the ppa datapath driver of lantiq UGW 7.4.1.

Additionally it adds the required reset definitions to the vr9 dtsi file.

It also prepares the reset_ppe() function calls for the other lantiq targets.

This feature is needed to be able to switch between ltq-atm/ltq-ptm driver
in ATM/PTM Auto-Mode at runtime.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
5 years ago
Danijel Tudek eae6cac6a3 lantiq: add support for AVM FRITZ!Box 7362 SL
Hardware:
- SoC: Lantiq VRX288
- RAM: Winbond W971GG6JB 1 Gb (128 MiB)
- Flash:
  - SPI: 8 Mb (1 MiB) for bootloader and tffs
  - NAND: 1 Gb (128 MiB) for OS
- xDSL: Lantiq VRX208
- WLAN: Atheros AR9381
- DECT: Dialog Semiconductors SC14441

Everything except FXS/DECT works
(no drivers for AVM's FXS implementation with SC14441).

Installation via FTP:
1. Use scripts/flashing/eva_ramboot.py to send initramfs-kernel.bin
to the device when powering on.
Standard AVM procedures with finding the correct IP address and
the right moment to open FTP apply here (approx. 4 seconds on 7362SL).
IMPORTANT: set lzma compression in ramdisk options, bootloader stalls
when receiving uncompressed images.

2. Transfer sysupgrade.bin image with scp to /tmp directory
and run sysupgrade

3. First boot might take a bit longer if linux_fs_start was set to 1,
in that case the device will reboot twice, first time it will fail to load
second kernel (overwritten by ubifs), set linux_fs_start to 0 and reboot.

OpenWrt uses the entire NAND flash. Kernel uses 4 MiB and rootfs uses
the rest of 124 MiB, overwriting everything related to FRITZ!OS - both
OS images, config and answering machine/media server data.
To return to FRITZ!OS, use AVM's recovery image.

Signed-off-by: Danijel Tudek <danijel.tudek@gmail.com>
5 years ago
Danijel Tudek 5026f43559 lantiq: move common FRITZ736X bits into dtsi
Move common FRITZ736X bits into dtsi file
as a preparation for FRITZ7362SL support.

Signed-off-by: Danijel Tudek <danijel.tudek@gmail.com>
5 years ago
Andy Binder 20f48c8ae3 lantiq: add support for AVM FRITZ!Box 7412
Hardware:

SoC: Lantiq VRX 220
CPU Cores: 2x MIPS 34Kc at 500 MHz
RAM: 128 MiB 250 MHz
Storage: 128 MiB NAND flash
Ethernet: built-in Fast Ethernet switch, only port 2 is used
Wireless: Atheros AR9287-BL1A b/g/n with 2 pcb antennas
Modem: built-in A/VDSL2 modem
DECT: Dialog SC14441
LEDs: 1 two-color, 4 one-color
Buttons: 2
FXS: 1 port via TAE or RJ12 connector
Everything except FXS/DECT works
(no drivers for AVM's FXS implementation with SC14441).

Installation:

Use the eva_ramboot.py script to load an initramfs image on the
device. Run it a few seconds after turning the device on.
$ scripts/flashing eva_ramboot 192.168.178.1 bin/targets/lantiq/xrx200/openwrt-lantiq-xrx200-avm_fritz7412-initramfs-kernel.bin
If it fails to find the device try the ip address 169.254.120.1.
(Firmware updates or the recovery tool apparently change it.)

IMPORTANT: set lzma compression in ramdisk options, bootloader stalls
when receiving uncompressed images.

The device will load it in ram and boot it. You can reach it under
the openwrt default ip address 192.168.1.1.

Check if the key linux_fs_start is not set to 1 in tffs:
$ fritz_tffs_nand -d /dev/mtd1 -n linux_fs_start
If it is set to 1, the bootloader will select the wrong set of
partitions. Restart the box and install an FritzOS upgrade or do a
recovery. Afterwards start again at step 1.

Run sysupgrade to persistently install OpenWRT.

Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.de>
Signed-off-by: Andy Binder <AndyBinder@gmx.de>
5 years ago
Andy Binder 50717510e7 fritz-tools: add fritz_tffs_nand_read tool
A tool for reading the TFFS partitions (a name-value storage usually
found in AVM Fritz!Box based devices) on nand flash.

Copyright (c) 2018 Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE>

Based on the fritz_tffs_read tool:
    Copyright (c) 2015-2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
and on the TFFS 2.0 kernel driver from AVM:
    Copyright (c) 2004-2007 AVM GmbH <fritzbox_info@avm.de>
and the TFFS 3.0 kernel driver from AVM:
    Copyright (C) 2004-2014 AVM GmbH <fritzbox_info@avm.de>
and the OpenWrt TFFS kernel driver:
    Copyright (c) 2013 John Crispin <blogic@openwrt.org>

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.

Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.de>
Signed-off-by: Andy Binder <AndyBinder@gmx.de>
5 years ago
Aleksander Jan Bajkowski 445ca981d1 sunxi: add support for Orange Pi PC Plus
CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz
GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0)
Memory: 1GB DDR3 (shared with GPU)
Onboard: Storage TF card (Max. 64GB) / MMC card slot
Onboard: Storage 8 GB eMMC
Onboard: Network 10/100M Ethernet RJ45
Onboard: Network WiFi 802.11 b/g/n (Realtek RTL8189FTV)
Onboard header: SPI, I2C, GPIO, UART
USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG

Known issues:
-Wifi diesn't work

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
5 years ago
Eneas U de Queiroz d971ae51a5 openssl: backport devcrypto changes from master
The patches to the /dev/crypto engine were commited to openssl master,
and will be in the next major version (3.0).

Changes:
- Optimization in computing a digest in one operation, saving an ioctl
- Runtime configuration options for the choice of algorithms to use
- Command to dump useful information about the algorithms supported by
  the engine and the system.
- Build the devcrypto engine as a dynamic module, like other engines.

The devcrypto engine is built as a separate package by default, but
options were added to allow building the engines into the main library.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
[refresh patches]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years ago
Vieno Hakkerinen c3425be082 6to4: update OpenWrt documentation URL
Signed-off-by: Vieno Hakkerinen <txt.file@txtfile.eu>
5 years ago
Piotr Dymacz c5394ec7e0 uboot-envtools: ath79: add support for YunCore A770
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
5 years ago
Piotr Dymacz 6fa94d5e8f ath79: add support for YunCore A770
YunCore A770 is a ceiling AC750 AP with 2 Fast Ethernet ports, PoE
(802.3at) support, based on QCA9531 + QCA9887.

Specification:

- 650/597/216 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of flash (SPI NOR)
- 2x 10/100 Mbps Ethernet (PoE 802.3at support in WAN port)
- 2T2R 2.4 GHz (QCA9531), with ext. PA and LNA
- 1T1R 5 GHz (QCA9887), with ext. FEM (SKY85728-11)
- 2x regular LED, 1x RGB LED (all driven by GPIO)
- 1x button (reset)
- DC jack for main power input (12 V)
- UART header on PCB

Flash instruction:

1. First, gain root access to the device, following below steps:

- Login into web gui (default password/IP: admin/192.168.188.253).
- Go to 'Advanced' -> 'Management' -> 'System' and download backup of
  configuration (bakfile.bin).
- Open the file as tar.gz archive, edit/update 'shadow' file and change
  hash of root password to something known.
- Repack the archive, rename it back to 'bakfile.bin' and use to
  restore configuration of the device.
- After that, device will reboot and can be accessed over SSH.

2. Then, install OpenWrt:

- Login over SSH and issue command:
  fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000"
- Upload 'sysupgrade' image and install it (only if previous command
  succeeded) with command: 'sysupgrade -n -F openwrt-...'.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
5 years ago
Piotr Dymacz 24de7c29e5 ipq40xx: backport I2C QUP driver changes from 4.17
Backport below changes for I2C QUP driver from v4.17:

  0668bc44a426 i2c: qup: fix copyrights and update to SPDX identifier
  7239872fb340 i2c: qup: fixed releasing dma without flush operation completion
  eb422b539c1f i2c: qup: minor code reorganization for use_dma
  6d5f37f166bb i2c: qup: remove redundant variables for BAM SG count
  c5adc0fa63a9 i2c: qup: schedule EOT and FLUSH tags at the end of transfer
  7e6c35fe602d i2c: qup: fix the transfer length for BAM RX EOT FLUSH tags
  3f450d3eea14 i2c: qup: proper error handling for i2c error in BAM mode
  08f15963bc75 i2c: qup: use the complete transfer length to choose DMA mode
  ecb6e1e5f435 i2c: qup: change completion timeout according to transfer length
  6f2f0f6465ac i2c: qup: fix buffer overflow for multiple msg of maximum xfer len
  f7714b4e451b i2c: qup: send NACK for last read sub transfers
  fbfab1ab0658 i2c: qup: reorganization of driver code to remove polling for qup v1
  7545c7dba169 i2c: qup: reorganization of driver code to remove polling for qup v2

This fixes various I2C issues observed on AP120C-AC board equipped with
Atmel/Microchip AT97SC3205T TPM module.

Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
5 years ago
Piotr Dymacz ff8a8074b2 ipq40xx: add ath10k-calibration-variant in AP120C-AC DTS
Use 'ath10k-calibration-variant' (with the value sent upstream) for the
second (5 GHz) radio in AP120C-AC board DTS. First radio uses the same
BDF as in one of Qualcomm reference designs.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
5 years ago
Piotr Dymacz 6ee73942f9 ipq-wifi: update ALFA Network AP120C-AC board-2.bin
Add specific 'variant' for 'bus=ahb,bmi-chip-id=0,bmi-board-id=25' BDF.
Use the same value ('ALFA-Network-AP120C-AC') as sent upstream.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
5 years ago
Paul Spooren 483498808e ib: show current revision based on $(REVISION)
This is useful in for the attendedsyupsgrade server (asu) to
distinguish between snapshot version. Currently asu can't tell devices
requesting a snapshot build if the same build is already installed.

Signed-off-by: Paul Spooren <mail@aparcar.org>
5 years ago
Paul Spooren f37afec866 ib: show unified target based on $(TARGETID)
Instead of showing a slightly more readable target like
"ar71xx (Generic)" print the more generic format "ar71xx/genric"

Signed-off-by: Paul Spooren <mail@aparcar.org>
5 years ago
Daniel Golle 69d3c7e6da ucert: add PROVIDES also for minimal 'ucert' package
Otherwise ucert-full gets selected instead of ucert when depending on
ucert.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5 years ago
Felix Fietkau 9f818cb002 mt76: update to the latest version
1d7760d mt76: mt7603: set moredata flag when queueing ps-filtered packets
0b927b2 mt76: fix return value check in mt76_wmac_probe()
e72376d mt76x02: fix hdr pointer in write txwi for USB

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years ago
Koen Vandeputte 364ab348dc kernel: bump 4.14 to 4.14.105
Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years ago
Koen Vandeputte 3ca38dcfa2 kernel: bump 4.9 to 4.9.162
Refreshed all patches.

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years ago
Felix Fietkau fd8705e635 tools/mkimage: use http download server (fixes FS#2052)
Fixes timeouts with trying to access the FTP site.
Also remove mirror2.openwrt.org, which does not keep current tarballs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years ago
Christian Lamparter 457de5a154 owl-loader: fix crash caused by endian patch
This patch fixes a crash that occured on the
BT Home Hub v5a (lantiq/xrx200) which resulted
in the device bootlooping.

Reported-by: Ryan Mounce <ryan@mounce.com.au>
Tested-by: Vitalij Alshevsky <v_alshevsky@tut.by>
Fixes: ddece08bf4 ("kernel: owl-loader: fix sparse endian warnings")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years ago
Mantas Pucka a4ba41863b mips: fix dynamic ftrace
This was fixed for v4.9 in 076d2ea68, now port to all kernels

Signed-off-by: Mantas Pucka <mantas@8devices.com>
5 years ago
Chen Minqiang e15bda603a ramips: rework network settings for HC5861
dts: disable port4 and leave it ephy mode because it connect to nothing
switch port5 connected to GE port we use it as wan port

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
5 years ago
Mantas Pucka fe591f2fe2 ar71xx: enable QCA955x SGMII fixup on Rambutan
fixes intermittent loss of connectivity on 1Gbit port, with
log message:

  803x_aneg_done: SGMII link is not ok

Signed-off-by: Mantas Pucka <mantas@8devices.com>
5 years ago
David Bauer 4484ef587a ath10k-ct: limit available channels via DT
This backports upstream commit

34d5629 ath10k: limit available channels via DT ieee80211-freq-limit

to the 4.19 ath10k-ct version. Without this patch, disabled channels
are still listed as a supported configuration for the radio.

The identical patch was also backported by OpenWRT to the non-ct driver.
It can be dropped as soon as we switch to an ath10k-ct version based on
4.20 or higher.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years ago
Michael Yartys fc2fd1c9d6 ath10k-firmware: update Candela Tech firmware images
Release notes since last update:

wave-1 firmware:

*  Feb 14, 2019:  Remove logic that causes assert when swba logic is not
                  initialized. This was seen when trying to bring up 6 VAP
                  vdevs. A similar fix went into wave-2 firmware some time
                  ago.

*  Feb 27, 2019:  Support up to 32 vAP vdevs, fix stack corruption when
                  driver requests too many vAP.

*  Feb 28, 2019:  Support beacon-tx-wmi callback message. This lets driver
                  properly clean up beacon buffers so we don't crash
                  (somethings the entire OS/system) due to DMA errors.

wave-2 firmware:

*  Feb 27. 2019:  Support up to 32 AP vdevs. Previous to this, stack would
                  be corrupted if you went past 16 AP vdevs.

*  Feb 28, 2019:  Support beacon-tx-wmi callback message. This lets driver
                  properly clean up beacon buffers. In wave-1, this could
                  crash the entire OS, but I didn't see the same crashes
                  in wave-2, so maybe it is fixed in some other way. Add
                  the feature regardless as it seems proper.

Signed-off-by: Michael Yartys <michael.yartys@gmail.com>
5 years ago
Michael Yartys 5c83f27ac5 ath10k-ct: Update to 2019-02-28
9360f389234a ath10k: Support up to 24 vAP per radio, fix DMA bug in wave-1.
9cbf8d430974 ath10k-ct: Add 4.20 driver, SGI support for fixed-rate tx.

Runtime tested on: ipq806x

Signed-off-by: Michael Yartys <michael.yartys@gmail.com>
5 years ago
Christian Lamparter 33727ecea5 lantiq: enlarge ZyXEL P-2812HNU-F1 kernel partition (FS#2124)
The current snapshot release kernel with it's 2119245 Byte
size is too big to fit into the 2097152 (2MiB) area that
was set aside for the kernel. Which causes the device to
fail to boot (after an update or even during a fresh install)

 NAND read: device 0 offset 0x60000, size 0x200000
  2097152 bytes read: OK
 ## Booting kernel from Legacy Image at 80800000 ...
    Image Name:   MIPS OpenWrt Linux-4.14.98
    Created:      2019-02-13   9:37:36 UTC
    Image Type:   MIPS Linux Kernel Image (lzma compressed)
    Data Size:    2119245 Bytes = 2 MiB
    Load Address: 80002000
    Entry Point:  80002000
    Verifying Checksum ... Bad Data CRC
 ERROR: can't get kernel image!

This patch fixes the problem by enlarging the kernel partition
at the cost of the ubi/data partition behind it. The patch
also adds a KERNEL_SIZE variable to the image Makefile to
prevent silent corruptions from happening in the future.

Please note: The u-boot environment for the router also
needs to be updated. So please attach an appropriate
serial converter cable and enter the following commands
into the u-boot prompt:

 setenv nboot 'nand read 0x80800000 0x60000 0x300000; bootm 0x80800000'
 saveenv

The wiki has been updated accordingly:
<https://openwrt.org/toh/zyxel/p2812hnu-f1>

Fixes: FS#2124
Suggested-by: Mafketel (User on bugs.openwrt.org)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years ago
Daniel Golle 13c379e5c6 ib: display whether profile comes with image metadata
Having image metadata (and signature) appended is a condition for
semi-automated sysupgrade, hence IB needs to be able to tell which
images will end up with metadata.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5 years ago
Daniel Golle c8778250a9 ramips: mt7620: export chip version and pkg
Similar to the (currently unused) mt7620_get_eco() function, introduce
mt7620_get_chipver() and mt7620_get_pkg() functions to allow rt2x00 to
probe for the type of WiSoC. This is ugly and probably unacceptable
for upstream, however, it should help to evaluate which of those hacks
are actually really needed, enumerate the possible values and label
them in a more meaningful way than currently done in the vendor driver.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5 years ago
Paul Spooren 7fa9794c4c metadata: add "metadata_version" field
allow downstream projects to see the current version of the metadata,
usefull if eventually more variables change

Signed-off-by: Paul Spooren <mail@aparcar.org>
5 years ago
Paul Spooren 208f287908 metadata: add "target" entry
add "target" entry based on $(TARGETID) resulting in
`<target>/<subtarget>`.

Signed-off-by: Paul Spooren <mail@aparcar.org>
5 years ago
Paul Spooren 26c16aec67 metadata: fixup "board"
currently the "board" parameter contains $(BOARD) which actually results
to `<target>` (like ramips, ar71xx) without subtarget. However, one
actually excepts (not?) to contain BOARD_NAME or DEVICE_NAME.

Signed-off-by: Paul Spooren <mail@aparcar.org>
5 years ago
Rafał Miłecki 9e32e288f0 kernel: fix refcnt leak in LED netdev trigger on interface rename
This fixes a possible unbalanced dev_hold():
> iw dev bar del
[  237.355366] unregister_netdevice: waiting for bar to become free. Usage count = 1
[  247.435362] unregister_netdevice: waiting for bar to become free. Usage count = 1
[  257.545366] unregister_netdevice: waiting for bar to become free. Usage count = 1

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
5 years ago
Jo-Philipp Wich 64bb88841f uqmi: inherit firewall zone membership to virtual sub interfaces
Fix an issue where subinterfaces were not added to the same
firewall zone as their parent.

Fixes: FS#2122
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years ago
Koen Vandeputte d3506d1bc1 ar71xx: ag71xx: fix compile error when enabling debug
Starting from kernel 4.5, phy_id needs to be fetched from a different location.

not doing so results in this compile error:

drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c: In function 'ag71xx_phy_connect_multi':
drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c:133:35: error: 'struct mdio_device' has no member named 'phy_id'
    ag->mii_bus->mdio_map[phy_addr]->phy_id);
                                   ^
./include/linux/printk.h:137:18: note: in definition of macro 'no_printk'
    printk(fmt, ##__VA_ARGS__); \
                  ^~~~~~~~~~~
drivers/net/ethernet/atheros/ag71xx/ag71xx.h:72:27: note: in expansion of macro 'pr_debug'
 #define DBG(fmt, args...) pr_debug(fmt, ## args)
                           ^~~~~~~~
drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c:130:3: note: in expansion of macro 'DBG'
   DBG("%s: PHY found at %s, uid=%08x\n",
   ^~~
scripts/Makefile.build:326: recipe for target 'drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.o' failed

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years ago
Koen Vandeputte 1cfbf95393 kernel: bump 4.14 to 4.14.104
Refreshed all patches.

Altered patches:
- 332-arc-add-OWRTDTB-section.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years ago
Koen Vandeputte fc45ae4461 kernel: bump 4.9 to 4.9.161
Refreshed all patches.

Altered patches:
- 332-arc-add-OWRTDTB-section.patch

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years ago
Vijayakumar Durai d0b969eee8 mac80211: rt2x00: do not increment sequence number while re-transmitting
Currently STA+AP re-transmitting the management frames with
incremented sequence number if hardware is assigning the sequence.

Fix is to assign the sequence number for Beacon by hardware
and for other Management frames software will assign the
sequence number

Signed-off-by: Vijayakumar Durai <vijayakumar.durai1@vivint.com>
5 years ago
Petr Štetiar 40530c8eb4 ath79: Add support for Ubiquiti Nanostation M (XW)
CPU:  AR9342 SoC
RAM:      64 MB DDR2
Flash:     8 MB NOR SPI
Ports: 2x100 MBit (24V PoE in, 24V PoE out), AR8236 switch
WLAN:  2.4/5 GHz
UART:      1 UART
LEDs:        Power, 2x Ethernet, 4x RSSI LEDs (orange, red, 2x green)
Buttons:     Reset

Flashing instructions using recovery method over TFTP

 1. Unplug the ethernet cable from the router.
 2. Using paper clip press and hold the router's reset button. Make sure
    you can feel it depressed by the paper clip. Do not release the button
    until step 4.
 3. While keeping the reset button pressed in, plug the ethernet cable
    back into the AP. Keep the reset button depressed until you see the
    device's LEDs flashing in upgrade mode (alternating LED1/LED3 and
    LED2/LED4), this may take up to 25 seconds.
 4. You may release the reset button, now the device should be in TFTP
    transfer mode.
 5. Set a static IP on your Computer's NIC. A static IP of 192.168.1.25/24
    should work.
 6. Plug the PoE injector's LAN cable directly to your computer.
 7. Start tftp client and issue following commands:
     tftp> binary
     tftp> connect 192.168.1.20
     tftp> put openwrt-ath79-generic-ubnt-nano-m-xw-squashfs-factory.bin

Tested-by: Joe Ayers <ae6xe@arrl.net>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years ago
Petr Štetiar 368b6d1a52 ath79: gmac: ar934x: Add parser for mii-gmac0-slave
While converting Nanostation M XW from current ar71xx code to ath79 I've
hit one issue, where the ethernet networking wasn't working, so I was
checking every bit in the networking setup path between ar71xx and
ath79.

I've came to the following code in ar71xx/mach-ubnt-xm.c:

 static void __init ubnt_xw_init(void) {
 	...
 	ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 |
                                   AR934X_ETH_CFG_MII_GMAC0_SLAVE);
 	...
 }

Where this code is setting AR934X_ETH_CFG_MII_GMAC0_SLAVE bit in
AR934X_GMAC_REG_ETH_CFG register, but I couldn't find a way of setting
this bit from DTS, so this patch adds `mii-gmac0-slave` DTS property
which allows setting of this bit in `gmac-config`, which is then used in
Nanostation M XW DTS.

Tested-by: Joe Ayers <ae6xe@arrl.net>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years ago