brcm2708: rename target to bcm27xx

This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>

config/Config-images.in

@@ -262,7 +262,7 @@ menu "Target Images"
 		int "Kernel partition size (in MB)"
 		depends on GRUB_IMAGES || USES_BOOT_PART
 		default 8 if TARGET_apm821xx_sata
-		default 64 if TARGET_brcm2708
+		default 64 if TARGET_bcm27xx
 		default 16
 
 	config TARGET_ROOTFS_PARTSIZE

config/Config-kernel.in

@@ -550,7 +550,7 @@ if KERNEL_CGROUPS
 
 		config KERNEL_BLK_DEV_THROTTLING
 			bool "Enable throttling policy"
-			default y if TARGET_brcm2708
+			default y if TARGET_bcm27xx
 
 		config KERNEL_BLK_DEV_THROTTLING_LOW
 			bool "Block throttling .low limit interface support (EXPERIMENTAL)"

package/firmware/cypress-nvram/Makefile

@@ -34,7 +34,7 @@ endef
 define Package/cypress-nvram-43430-sdio-rpi-3b
   $(Package/cypress-nvram-default)
   TITLE:=CYW43430 NVRAM for Raspberry Pi 3B
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define Package/cypress-nvram-43430-sdio-rpi-3b/install
@@ -50,7 +50,7 @@ $(eval $(call BuildPackage,cypress-nvram-43430-sdio-rpi-3b))
 define Package/cypress-nvram-43430-sdio-rpi-zero-w
   $(Package/cypress-nvram-default)
   TITLE:=CYW43430 NVRAM for Raspberry Pi Zero W
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define Package/cypress-nvram-43430-sdio-rpi-zero-w/install
@@ -66,7 +66,7 @@ $(eval $(call BuildPackage,cypress-nvram-43430-sdio-rpi-zero-w))
 define Package/cypress-nvram-43455-sdio-rpi-3b-plus
   $(Package/cypress-nvram-default)
   TITLE:=CYW43455 NVRAM for Raspberry Pi 3B+
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define Package/cypress-nvram-43455-sdio-rpi-3b-plus/install
@@ -82,7 +82,7 @@ $(eval $(call BuildPackage,cypress-nvram-43455-sdio-rpi-3b-plus))
 define Package/cypress-nvram-43455-sdio-rpi-4b
   $(Package/cypress-nvram-default)
   TITLE:=CYW43455 NVRAM for Raspberry Pi 4B
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define Package/cypress-nvram-43455-sdio-rpi-4b/install

package/kernel/bcm27xx-gpu-fw/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
-PKG_NAME:=brcm2708-gpu-fw
+PKG_NAME:=bcm27xx-gpu-fw
 PKG_VERSION:=2020-01-30
 PKG_RELEASE:=63bdbe0ea609a69f5c0a2212d608ef3d9915a7ad
 
@@ -133,16 +133,16 @@ define Download/start4x_elf
 endef
 $(eval $(call Download,start4x_elf))
 
-define Package/brcm2708-gpu-fw
+define Package/bcm27xx-gpu-fw
   SECTION:=boot
   CATEGORY:=Boot Loaders
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
-  TITLE:=brcm2708-gpu-fw
+  TITLE:=bcm27xx-gpu-fw
-  DEFAULT:=y if TARGET_brcm2708
+  DEFAULT:=y if TARGET_bcm27xx
 endef
 
-define Package/brcm2708-gpu-fw/description
+define Package/bcm27xx-gpu-fw/description
- GPU and kernel boot firmware for brcm2708. 
+ GPU and kernel boot firmware for bcm27xx.
 endef
 
 define Build/Prepare
@@ -168,7 +168,7 @@ define Build/Compile
 	true
 endef
 
-define Package/brcm2708-gpu-fw/install
+define Package/bcm27xx-gpu-fw/install
 	true
 endef
 
@@ -189,4 +189,4 @@ define Build/InstallDev
 	$(CP) $(PKG_BUILD_DIR)/fixup4x.dat $(KERNEL_BUILD_DIR)
 endef
 
-$(eval $(call BuildPackage,brcm2708-gpu-fw))
+$(eval $(call BuildPackage,bcm27xx-gpu-fw))

package/kernel/linux/modules/netdevices.mk

@@ -125,7 +125,7 @@ $(eval $(call KernelPackage,mii))
 define KernelPackage/mdio-gpio
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:= Supports GPIO lib-based MDIO busses
-  DEPENDS:=+kmod-libphy @GPIO_SUPPORT +(TARGET_armvirt||TARGET_brcm2708_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
+  DEPENDS:=+kmod-libphy @GPIO_SUPPORT +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
   KCONFIG:= \
 	CONFIG_MDIO_BITBANG \
 	CONFIG_MDIO_GPIO
@@ -320,7 +320,7 @@ $(eval $(call KernelPackage,switch-rtl8306))
 define KernelPackage/switch-rtl8366-smi
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=Realtek RTL8366 SMI switch interface support
-  DEPENDS:=@GPIO_SUPPORT +kmod-swconfig +(TARGET_armvirt||TARGET_brcm2708_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
+  DEPENDS:=@GPIO_SUPPORT +kmod-swconfig +(TARGET_armvirt||TARGET_bcm27xx_bcm2708||TARGET_samsung||TARGET_tegra):kmod-of-mdio
   KCONFIG:=CONFIG_RTL8366_SMI
   FILES:=$(LINUX_DIR)/drivers/net/phy/rtl8366_smi.ko
   AUTOLOAD:=$(call AutoLoad,42,rtl8366_smi)

package/kernel/mac80211/broadcom.mk

@@ -449,7 +449,7 @@ define KernelPackage/brcmfmac/config
 
 	config BRCMFMAC_SDIO
 		bool "Enable SDIO bus interface support"
-		default y if TARGET_brcm2708
+		default y if TARGET_bcm27xx
 		default y if TARGET_sunxi
 		default n
 		help

package/utils/bcm27xx-userland/Makefile

@@ -7,7 +7,7 @@
 
 include $(TOPDIR)/rules.mk
 
-PKG_NAME:=brcm2708-userland
+PKG_NAME:=bcm27xx-userland
 PKG_VERSION:=42ec119e03eb8dffc7c83e2ac0e665e333abbef6
 PKG_RELEASE:=1
 
@@ -34,19 +34,19 @@ include $(INCLUDE_DIR)/cmake.mk
 TAR_OPTIONS:=--strip-components 1 $(TAR_OPTIONS)
 TAR_CMD=$(HOST_TAR) -C $(1) $(TAR_OPTIONS)
 
-define Package/brcm2708-userland
+define Package/bcm27xx-userland
   SECTION:=utils
   CATEGORY:=Utilities
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
-  TITLE:=BCM2708 userland tools
+  TITLE:=BCM27xx userland tools
-  DEFAULT:=y if TARGET_brcm2708
+  DEFAULT:=y if TARGET_bcm27xx
 endef
 
-define Package/brcm2708-userland/description
+define Package/bcm27xx-userland/description
-  BCM2708 userland tools including vcgencmd and tvservice.
+  BCM27xx userland tools including vcgencmd and tvservice.
 endef
 
-define Package/brcm2708-userland/install
+define Package/bcm27xx-userland/install
 	$(INSTALL_DIR) $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/dtparam $(1)/usr/bin
 	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/dtoverlay $(1)/usr/bin
@@ -61,4 +61,4 @@ define Package/brcm2708-userland/install
 	$(CP) $(PKG_INSTALL_DIR)/usr/lib/ $(1)/usr/
 endef
 
-$(eval $(call BuildPackage,brcm2708-userland))
+$(eval $(call BuildPackage,bcm27xx-userland))

target/linux/bcm27xx/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 ARCH:=arm
-BOARD:=brcm2708
+BOARD:=bcm27xx
 BOARDNAME:=Broadcom BCM27xx
 FEATURES:=ext4 audio usb usbgadget display gpio fpu squashfs rootfs-part boot-part
 MAINTAINER:=Álvaro Fernández Rojas <noltari@gmail.com>
@@ -23,7 +23,7 @@ endef
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += \
-	brcm2708-gpu-fw \
+	bcm27xx-gpu-fw \
 	kmod-usb-hid \
 	kmod-sound-core kmod-sound-arm-bcm2835 \
 	kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \

target/linux/bcm27xx/modules.mk

@@ -5,4 +5,4 @@
 # See /LICENSE for more information.
 #
 
-include $(TOPDIR)/target/linux/brcm2708/modules/*.mk
+include $(TOPDIR)/target/linux/bcm27xx/modules/*.mk

target/linux/bcm27xx/modules/hwmon.mk

@@ -10,7 +10,7 @@ define KernelPackage/hwmon-raspberrypi
   KCONFIG:=CONFIG_SENSORS_RASPBERRYPI_HWMON
   FILES:=$(LINUX_DIR)/drivers/hwmon/raspberrypi-hwmon.ko
   AUTOLOAD:=$(call AutoLoad,60,raspberrypi-hwmon)
-  $(call AddDepends/hwmon,@TARGET_brcm2708)
+  $(call AddDepends/hwmon,@TARGET_bcm27xx)
 endef
 
 define KernelPackage/hwmon-raspberrypi/description
@@ -23,7 +23,7 @@ $(eval $(call KernelPackage,hwmon-raspberrypi))
 define KernelPackage/hwmon-rpi-poe-fan
   SUBMENU:=$(HWMON_MENU)
   TITLE:=Raspberry Pi PoE HAT fan
-  DEPENDS:=@TARGET_brcm2708 +kmod-hwmon-core
+  DEPENDS:=@TARGET_bcm27xx +kmod-hwmon-core
   KCONFIG:=CONFIG_SENSORS_RPI_POE_FAN
   FILES:=$(LINUX_DIR)/drivers/hwmon/rpi-poe-fan.ko
   AUTOLOAD:=$(call AutoProbe,rpi-poe-fan)

target/linux/bcm27xx/modules/i2c.mk

@@ -11,7 +11,7 @@ I2C_BCM2835_MODULES:=\
 define KernelPackage/i2c-bcm2835
   $(call i2c_defaults,$(I2C_BCM2835_MODULES),59)
   TITLE:=Broadcom BCM2835 I2C master controller driver
-  DEPENDS:=@TARGET_brcm2708 +kmod-i2c-core
+  DEPENDS:=@TARGET_bcm27xx +kmod-i2c-core
 endef
 
 define KernelPackage/i2c-bcm2835/description

target/linux/bcm27xx/modules/other.mk

@@ -13,7 +13,7 @@ define KernelPackage/pwm-bcm2835
     CONFIG_PWM_BCM2835
   FILES:=$(LINUX_DIR)/drivers/pwm/pwm-bcm2835.ko
   AUTOLOAD:=$(call AutoLoad,60,pwm-bcm2835)
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define KernelPackage/pwm-bcm2835/description
@@ -30,7 +30,7 @@ define KernelPackage/random-bcm2835
     CONFIG_HW_RANDOM_BCM2835
   FILES:=$(LINUX_DIR)/drivers/char/hw_random/bcm2835-rng.ko
   AUTOLOAD:=$(call AutoLoad,11,bcm2835-rng)
-  DEPENDS:=@TARGET_brcm2708 +kmod-random-core
+  DEPENDS:=@TARGET_bcm27xx +kmod-random-core
 endef
 
 define KernelPackage/random-bcm2835/description
@@ -46,7 +46,7 @@ define KernelPackage/smi-bcm2835
   KCONFIG:=CONFIG_BCM2835_SMI
   FILES:=$(LINUX_DIR)/drivers/misc/bcm2835_smi.ko
   AUTOLOAD:=$(call AutoLoad,20,bcm2835_smi)
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define KernelPackage/smi-bcm2835/description
@@ -63,7 +63,7 @@ define KernelPackage/smi-bcm2835-dev
   KCONFIG:=CONFIG_BCM2835_SMI_DEV
   FILES:=$(LINUX_DIR)/drivers/char/broadcom/bcm2835_smi_dev.ko
   AUTOLOAD:=$(call AutoLoad,21,bcm2835_smi_dev)
-  DEPENDS:=@TARGET_brcm2708 +kmod-smi-bcm2835
+  DEPENDS:=@TARGET_bcm27xx +kmod-smi-bcm2835
 endef
 
 define KernelPackage/smi-bcm2835-dev/description

target/linux/bcm27xx/modules/sound.mk

@@ -14,7 +14,7 @@ define KernelPackage/sound-arm-bcm2835
   FILES:= \
     $(LINUX_DIR)/drivers/staging/vc04_services/bcm2835-audio/snd-bcm2835.ko
   AUTOLOAD:=$(call AutoLoad,68,snd-bcm2835)
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
   $(call AddDepends/sound)
 endef
 
@@ -36,7 +36,7 @@ define KernelPackage/sound-soc-bcm2835-i2s
   FILES:= \
     $(LINUX_DIR)/sound/soc/bcm/snd-soc-bcm2835-i2s.ko
   AUTOLOAD:=$(call AutoLoad,68,snd-soc-bcm2835-i2s)
-  DEPENDS:=@TARGET_brcm2708 +kmod-sound-soc-core
+  DEPENDS:=@TARGET_bcm27xx +kmod-sound-soc-core
   $(call AddDepends/sound)
 endef
 

target/linux/bcm27xx/modules/spi.mk

@@ -14,7 +14,7 @@ define KernelPackage/spi-bcm2835
     CONFIG_SPI_MASTER=y
   FILES:=$(LINUX_DIR)/drivers/spi/spi-bcm2835.ko
   AUTOLOAD:=$(call AutoLoad,89,spi-bcm2835)
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define KernelPackage/spi-bcm2835/description
@@ -33,7 +33,7 @@ define KernelPackage/spi-bcm2835-aux
     CONFIG_SPI_MASTER=y
   FILES:=$(LINUX_DIR)/drivers/spi/spi-bcm2835aux.ko
   AUTOLOAD:=$(call AutoLoad,89,spi-bcm2835aux)
-  DEPENDS:=@TARGET_brcm2708
+  DEPENDS:=@TARGET_bcm27xx
 endef
 
 define KernelPackage/spi-bcm2835-aux/description

target/linux/bcm27xx/modules/video.mk

@@ -13,7 +13,7 @@ define KernelPackage/camera-bcm2835
   FILES:= \
     $(LINUX_DIR)/drivers/staging/vc04_services/bcm2835-camera/bcm2835-v4l2.ko
   AUTOLOAD:=$(call AutoLoad,65,bcm2835-v4l2)
-  $(call AddDepends/video,@TARGET_brcm2708 +kmod-vchiq-mmal-bcm2835 +kmod-video-videobuf2)
+  $(call AddDepends/video,@TARGET_bcm27xx +kmod-vchiq-mmal-bcm2835 +kmod-video-videobuf2)
 endef
 
 define KernelPackage/camera-bcm2835/description
@@ -28,7 +28,7 @@ define KernelPackage/drm-vc4
   SUBMENU:=$(VIDEO_MENU)
   TITLE:=Broadcom VC4 Graphics
   DEPENDS:= \
-    @TARGET_brcm2708 +kmod-drm \
+    @TARGET_bcm27xx +kmod-drm \
     +kmod-sound-core \
     +kmod-sound-soc-core
   KCONFIG:= \
@@ -56,7 +56,7 @@ define KernelPackage/vc-sm-cma
     CONFIG_BCM_VC_SM_CMA
   FILES:= \
     $(LINUX_DIR)/drivers/staging/vc04_services/vc-sm-cma/vc-sm-cma.ko
-  $(call AddDepends/video,@TARGET_brcm2708)
+  $(call AddDepends/video,@TARGET_bcm27xx)
 endef
 
 define KernelPackage/vc-sm-cma/description
@@ -74,7 +74,7 @@ define KernelPackage/vchiq-mmal-bcm2835
     CONFIG_VIDEO_CODEC_BCM2835=n
   FILES:= \
     $(LINUX_DIR)/drivers/staging/vc04_services/vchiq-mmal/bcm2835-mmal-vchiq.ko
-  $(call AddDepends/video,@TARGET_brcm2708 +kmod-vc-sm-cma)
+  $(call AddDepends/video,@TARGET_bcm27xx +kmod-vc-sm-cma)
 endef
 
 define KernelPackage/vchiq-mmal-bcm2835/description