You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ath79/image
Andrew Cameron e15049c88b ath79: add support for TP-Link CPE610-v1
TP-Link CPE610-v1 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344

Specifications:
 - Based on the same underlying hardware as the TP-Link CPE510
 - Power, LAN, WLAN5G green LEDs
 - 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector

Flashing instructions:
 Flash factory image through stock firmware WEB UI
 or through TFTP
 To get to TFTP recovery just hold reset button while powering on for
 around 4-5 seconds and release.
 Rename factory image to recovery.bin
 Stock TFTP server IP:192.168.0.100
 Stock device TFTP adress:192.168.0.254

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
5 years ago
..
lzma-loader ath79: lzma-loader: sync with ar71xx target 6 years ago
Makefile ath79: add support for Buffalo BHR-4GRV2 6 years ago
common-buffalo.mk ath79: add hwver parameter to buffalo-tag 6 years ago
common-netgear.mk ath79: add support for Netgear EX6400 and EX7300 5 years ago
common-tp-link.mk ath79: Utilize tplink-safeloader definition 5 years ago
generic-tp-link.mk ath79: add support for TP-Link CPE610-v1 5 years ago
generic-ubnt.mk ath79: add support for Ubiquiti airCube ISP 5 years ago
generic.mk ath79: add support for 8devices Carambola2 development board 5 years ago
nand.mk ath79: fix boardname of GL.iNet GL-AR300M 6 years ago
tiny-netgear.mk ath79: remove more duplicate image build variables 5 years ago
tiny-tp-link.mk ath79: add support for TP-Link TL-WR941N v7 (CN) 5 years ago
tiny.mk ath79: modify mtd partitions for Buffalo BHR-4GRV2 6 years ago