dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
OpenWRT firmware for routers
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
38,787 Commits
2 Branches
0 Tags
653 MiB
Diff 68.3%
C 21%
Makefile 4.7%
Shell 2.3%
Roff 1.6%
Other 2%
 
 
 
 
 
 
v19.07.3_mercusys_ac12_duma
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '9715beb04c'
${ noResults }
Go to file
Sven Roederer 9715beb04c ramips: add support for Ubiquiti EdgeRouter X-SFP 
This patch adds support for the Ubiquiti EdgeRouter X-SFP and
improves support for the EdgeRouter X (PoE-passthrough).

Specification:
- SoC: MediaTek MT7621AT
- Flash: 256 MiB
- RAM: 265 MiB
- Ethernet: 5 x LAN (1000 Mbps)
- UART: 1 x UART on PCB (3.3V, RX, TX, GND) - 57600 8N1
- EdgeRouter X:
  - 1 x PoE-Passtrough (Eth4)
  - powered by Wallwart or passive PoE
- EdgeRouter X-SFP:
  - 5 x PoE-Out (24V, passive)
  - 1 x SFP (unknown status)
  - powered by Wallwart (24V)

Doesn't work:
* SoC has crypto engine but no open driver.
* SoC has nat acceleration, but no open driver.
* This router has 2MB spi flash soldered in but MT
  nand/spi drivers do not support pin sharing,
  so it is not accessable and disabled. Stock
  firmware could read it and it was empty.

Installation

via vendor firmware:
- build an Initrd-image (> 3MiB) and upload the factory-image
- initrd can have luci-mod-failsafe
- flash final firmware via LuCI / sysupgrade on rebooted system

via TFTP:
- stop uboot into tftp-load into option "1"
- upload factory.bin image

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
 		7 years ago
.github github: include pull request template 7 years ago
config kernel: Make KERNEL_PERF_EVENTS selectable 7 years ago
include build: fix kernel refresh failure on first run 7 years ago
package perf: Depend on KERNEL_PERF_EVENTS 7 years ago
scripts scripts/download.pl: print the command used to download files 7 years ago
target ramips: add support for Ubiquiti EdgeRouter X-SFP 7 years ago
toolchain toolchain/binutils: Set 2.28 as default version 7 years ago
tools tar: override symlink permissions 7 years ago
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 12 years ago
.gitignore gitignore: add /overlay 7 years ago
BSDmakefile add missing copyright header 17 years ago
Config.in branding: add LEDE branding 8 years ago
LICENSE finally move buildroot-ng to trunk 8 years ago
Makefile build: prepare config.seed before package compilation 7 years ago
README README: Update project README 8 years ago
feeds.conf.default Add video feed to feeds.conf.default 7 years ago
rules.mk rules.mk: make PKG_CONFIG_DEPENDS properly track string values 7 years ago

README 

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org