You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ramips
Sungbo Eo b6c80f85cb ramips: set uImage name of WeVO 11AC NAS and W2914NS v2
The stock firmware and bootloader only accept uImage with names that
match certain patterns. This patch enables OpenWrt installation from
stock firmware without having to reflash the bootloader or access the
UART console.

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(cherry picked from commit 19800ac095)
[backported]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years ago
..
base-files ramips: fix MAC address setup for Samsung CY-SWR1100 5 years ago
dts ramips: assign correct key-code to wps buttons 5 years ago
files-4.14/drivers ramips: ethernet: remove unused SIOCETHTOOL ioctl handling 5 years ago
image ramips: set uImage name of WeVO 11AC NAS and W2914NS v2 5 years ago
mt76x8 ramips: enable R6120 USB power 5 years ago
mt7620 ramips: Add support for Head Weblink HDRM200 5 years ago
mt7621 ramips: mt7621: disable CONFIG_MTD_SPLIT_FIRMWARE 6 years ago
patches-4.14 kernel: bump 4.14 to 4.14.154 5 years ago
rt288x ramips: disable CONFIG_MTD_SPLIT_FIRMWARE 5 years ago
rt305x ramips: disable CONFIG_MTD_SPLIT_FIRMWARE 5 years ago
rt3883 ramips: rt3883: drop jimage support 5 years ago
Makefile ramips: switch to linux 4.14 6 years ago
modules.mk kernel: Fix kmod-regmap split 5 years ago