You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ramips
Tobias Welz 816973f42a ramips: enable flashing WizFi630S via OEM firmware
WIZnet WizFi630s board name is written slightly different it its OEM
OpenWrt firmware. This causes an incompatibility warning during flashing
with sysupgrade. This patch is adding the vendor board name to the
supported devices list to avoid this warning. For initial flashing you
can use sysupgrade via command line or luci beside of TFTP.
Do not keep the OEM configuration during sysupgrade.

Signed-off-by: Tobias Welz <tw@wiznet.eu>
4 years ago
..
base-files/etc treewide: drop shebang from non-executable target files 4 years ago
dts ramips: remove doublet entry in WizFi630S dts file 4 years ago
files/drivers ramips: add arl_table support for MT7530 4 years ago
image ramips: enable flashing WizFi630S via OEM firmware 4 years ago
mt76x8 ramips: add support for TP-Link RE200 v3 4 years ago
mt7620 ramips: switch MT7620 subtarget to 5.4 4 years ago
mt7621 target: replace remaining occurrences of ifconfig with ip 4 years ago
patches-4.14 kernel: Update kernel 4.14 to version 4.14.187 4 years ago
patches-5.4 kernel: bump 5.4 to 5.4.52 4 years ago
rt288x ramips: remove default switch setup in 02_network 4 years ago
rt305x ramips: improve LED support for D-Link DIR-615 D series 4 years ago
rt3883 treewide: drop shebang from non-executable target files 4 years ago
Makefile ramips: add 5.4 as testing kernel 4 years ago
modules.mk ramips: fix path for dma-ralink and mtk-hsdma 4 years ago