You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ath79
David Bauer 6f2e1b7485 ath79: disable delays on AT803X config init
Until upstream commit 6d4cd041f0af("net: phy: at803x: disable delay
only for RGMII mode"), delays were not disabled on driver probe
for the Atheros AR803x PHYs, although the RX delay is enabled on
soft and hard reset.

In addition, the TX delay setting is retained on soft-reset.

This patch disables both delays on config init to align the behavior
with kernel 5.1 and higher. It can be safely dropped with kernel 5.1.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years ago
..
base-files/etc/hotplug.d/ieee80211 ath79: split base-files into subtargets 5 years ago
dts ath79: add support for ZyXEL NBG6716 5 years ago
files ath79: add AR934x NAND Flash Controller driver 5 years ago
generic ath79: split base-files into subtargets 5 years ago
image ath79: fix remaining IMAGE_SIZE issues 5 years ago
nand ath79: split base-files into subtargets 5 years ago
patches-4.14 ath79: disable delays on AT803X config init 5 years ago
patches-4.19 ath79: disable delays on AT803X config init 5 years ago
tiny ath79: split base-files into subtargets 5 years ago
Makefile treewide: kernel: bump some targets to 4.19 5 years ago
config-4.14 ath79: add support for D-Link DIR-859 A1 6 years ago
config-4.19 ath79: add support for Qihoo C301 5 years ago
modules.mk ath79: add new OF only target for QCA MIPS silicon 6 years ago