openwrt

OpenWRT firmware for routers

You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Go to file

Robert Marko 6256ca3232 ipq40xx: add support for 8devices Habanero DVK This patch adds support for the 8devices Habanero development board. Specs are: CPU: QCA IPQ4019 RAM: DDR3L 512MB Storage: 32MB SPI-NOR and optional Parallel SLC NAND(Some boards ship with it and some without) WLAN1: 2.4 GHz built into IPQ4019 (802.11n) 2x2 WLAN2: 5 GHz built into IPO4019 (802.11ac Wawe-2) 2x2 Ethernet: 5x Gbit LAN (QCA 8075) USB: 1x USB 2.0 and 1x USB 3.0 (Both built into IPQ4019) MicroSD slot (Uses SD controller built into IPQ4019) SDIO3.0/EMMC slot (Uses the same SD controller) Mini PCI-E Gen 2.0 slot (Built into IPQ4019) 5x LEDs (4 GPIO controllable) 2x Pushbutton (1 is connected to GPIO, other to SoC reset) LCD ZIF socket (Uses the LCD controller built into IPQ4019 which has no driver support) 1x UART 115200 rate on J18 2x breakout development headers 12V DC Jack for power DIP switch for bootstrap configuration Installation instructions: Since boards ship with vendors fork of OpenWrt sysupgrade can be used. Signed-off-by: Robert Marko <robimarko@gmail.com>		4 years ago
.github	build: Update README & github help	6 years ago
config	kernel: Use new symbol to deactivate MIPS FPU support	4 years ago
include	build: simplify gnu-getopt search	4 years ago
package	ipq40xx: add support for 8devices Habanero DVK	4 years ago
scripts	build: Fix directory symlinks not removed when cleaning STAGING_DIR	4 years ago
target	ipq40xx: add support for 8devices Habanero DVK	4 years ago
toolchain	toolchain/binutils: Add binutils 2.34	4 years ago
tools	mkrasimage: fix segmentation fault	4 years ago
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	12 years ago
.gitignore	gitignore: ignore patches in OpenWrt root directory	5 years ago
BSDmakefile	add missing copyright header	17 years ago
Config.in	merge: base: update base-files and basic config	7 years ago
LICENSE	finally move buildroot-ng to trunk	8 years ago
Makefile	build: add buildinfo as single Makefile target	5 years ago
README	build: switch to Python 3	5 years ago
feeds.conf.default	feeds: switch git.lede-project.org URLs to git.openwrt.org	6 years ago
rules.mk	rules.mk: remove "$(STAGING_DIR)/include"	5 years ago

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org