You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
openwrt/target/linux/ath79
Davide Fioravanti dfb7a4ce5d ath79: add support for Sitecom WLR-8100
Sitecom WLR-8100 v1 002 (marketed as X8 AC1750) is a dual band wireless
router.

Specification:

- Qualcomm Atheros SoC QCA9558
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (Macronix MX25L12845EMI-10G - SPI NOR)
- 5x 10/100/1000 Mbps Ethernet
- 3T3R 2.4 GHz (QCA9558 WMAC)
- 3T3R 5.8 Ghz (QCA9880-BR4A)
- 1x USB 3.0 (Etron EJ168A)
- 1x USB 2.0
- 9x LEDs
- 2x GPIO buttons

Everything working.
Installation and restore procedure tested

Installation
1. Connect to one of LAN (yellow) ethernet ports,
2. Open router configuration interface,
3. Go to Toolbox > Firmware,
4. Browse for OpenWrt factory image with dlf extension and hit Apply,
5. Wait few minutes, after the Power LED will stop blinking, the router
	is ready for configuration.

Restore OEM FW (Linux only)
1. Download OEM FW from website (tested with WLR-8100v1002-firmware-v27.dlf)
2. Compile the FW for this router and locate the "mksenaofw" tool
	in build_dir/host/firmware-utils/bin/ inside the OpenWrt buildroot
3. Execute "mksenaofw -d WLR-8100v1002-firmware-v27.dlf -o WLR-8100v1002-firmware-v27.dlf.out" where:
	WLR-8100v1002-firmware-v27.dlf is the path to the input file
		(use the downloaded file)
	WLR-8100v1002-firmware-v27.dlf.out is the path to the output file
		(you can use the filename you want)
4. Flash the new WLR-8100v1002-firmware-v27.dlf.out file. WARNING: Do not keep settings.

Additional notes.
The original firmware has the following button configuration:
- Press for 2s the 2.4GHz button: WPS for 2.4GHz
- Press for 2s the 5GHz button: WPS for 5GHz
- Press for 15s both 2.4GHz and 5GHz buttons: Reset
I am not able to replicate this behaviour, so I used the following configuration:
- Press the 2.4GHz button: RFKILL (disable/enable every wireless interfaces)
- Press the 5GHz button: Reset

Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
4 years ago
..
base-files ath79: move mikrotik-caldata.sh to target base-files 4 years ago
dts ath79: add support for Sitecom WLR-8100 4 years ago
files ath79: add support for kernel 5.4 4 years ago
files-4.19/drivers/net/ethernet/atheros/ag71xx ath79: add support for kernel 5.4 4 years ago
generic ath79: add support for Sitecom WLR-8100 4 years ago
image ath79: add support for Sitecom WLR-8100 4 years ago
nand ath79: add support for DomyWifi DW33D 4 years ago
patches-4.14 kernel: bump 4.14 to 4.14.171 4 years ago
patches-4.19 kernel: bump 4.19 to 4.19.106 4 years ago
patches-5.4 ath79: re-add accidentally dropped patch to kernel 5.4 4 years ago
tiny ath79: add support for kernel 5.4 4 years ago
Makefile ath79: add support for kernel 5.4 4 years ago
config-4.14 ath79: enable PCI for whole target 5 years ago
config-4.19 ath79: add new ar934x spi driver 4 years ago
config-5.4 ath79: add support for kernel 5.4 4 years ago
modules.mk ath79: add new OF only target for QCA MIPS silicon 6 years ago