You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
0ab9f283f7
Specifications:
- SoC: MT7628DAN (MT7628AN with 64MB built-in RAM)
- Flash: 8M SPI NOR
- Ethernet: 5x 10/100Mbps
- WiFi: 2.4G: MT7628 built-in
5G: MT7612E
- 1x miniPCIe slot for LTE modem (only USB pins connected)
- 1x SIM slot
Flash instruction:
U-boot has a builtin web recovery page:
1. Hold the reset button while powering it up
2. Connect to the ethernet and set an IP in 192.168.1.0/24 range
3. Open your browser and upload firmware through http://192.168.1.1
Note about the LTE modem:
If your router comes with an EC25 module and it doesn't show up
as a QMI device, you should do the following to switch it to QMI
mode:
1. Install kmod-usb-serial-option and a terminal software
(e.g. minicom or screen). All 4 serial ports of the modem
should be available now.
2. Open /dev/ttyUSB3 with the terminal software and type this
AT command: AT+QCFG="usbnet",0
3. Power-cycle the router. You should now get a QMI device
recognized.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
|
5 years ago | |
|---|---|---|
| .. | ||
| base-files | 5 years ago | |
| dts | 5 years ago | |
| files-4.14/drivers | 5 years ago | |
| image | 5 years ago | |
| mt76x8 | 5 years ago | |
| mt7620 | 5 years ago | |
| mt7621 | 6 years ago | |
| patches-4.14 | 5 years ago | |
| rt288x | 6 years ago | |
| rt305x | 6 years ago | |
| rt3883 | 6 years ago | |
| Makefile | 6 years ago | |
| modules.mk | 6 years ago | |