You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
INAGAKI Hiroshi f305ce5c35 ramips: add support for I-O DATA WN-AC1167GR
I-O DATA WN-AC1167GR is a 2.4/5 GHz band 11ac router, based on
MediaTek MT7620A.

Specification:

- SoC     : MediaTek MT7620A
- RAM     : DDR2 64 MB
- Flash   : SPI-NOR 8MB
- WLAN    : 2.4/5 GHz, 2T2R
  - 2.4 GHz: MT7620A (SoC)
  - 5 GHz  : MT7612E
- Ethernet: 10/100/1000 Mbps (ext. MT7530)
- LED/key : 4x/3x (2x buttons, 1x slide-switch)
- UART    : through-hole on PCB
  - J2: TX, GND, RX, Vcc from SoC side
  - 115200n8

Flash instruction using factory image:

1. Boot WN-AC1167GR normaly
2. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
3. Select the OpenWrt factory image and click update ("更新") button
to perform firmware update
4. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
5 years ago
..
lzma-loader ramips: Add support for mt7621 to lzma-loader 6 years ago
Makefile build: move seama commands to image-commands.mk 6 years ago
mt76x8.mk ramips: add support for Archer C50 v4 6 years ago
mt7620.mk ramips: add support for I-O DATA WN-AC1167GR 5 years ago
mt7621.mk ramips: add kmod-mt76x2 to WeVo 11AC NAS 6 years ago
rt288x.mk ramips: use patch-dtb for F5D8235 V1 6 years ago
rt305x.mk ramips: consolidate seama image build code 6 years ago
rt3883.mk ramips: consolidate seama image build code 6 years ago