You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
27b2f0fc0f
Iomega Storcenter ix2-200 is a dual SATA NAS powered by a Marvell
Kirkwood SoC clocked at 1GHz. It has 256MB of RAM and 32MB of
flash memory, 3x USB 2.0 and 1x 1Gbit/s NIC
Specification:
- SoC: Marvell Kirkwood 88F6281
- CPU/Speed: 1000Mhz
- Flash-Chip: Hynix NAND
- Flash size: 32 MiB,erase size:16 KiB,page size:512,OOB size:16
- RAM: 256MB
- LAN: 1x 1000 Mbps Ethernet
- WiFi: none
- 3x USB 2.0
- UART: for serial console
Installation instructions - easy steps:
1. download factory.bin and copy into tftp server
2. access uboot environment with serial cable and run
```
setenv mainlineLinux yes
setenv arcNumber 1682
setenv console 'console=ttyS0,115200n8'
setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
setenv bootargs_root 'root='
setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
saveenv
setenv serverip 192.168.1.1
setenv ipaddr 192.168.1.13
tftpboot 0x00800000 factory.bin
nand erase 0x100000 $(filesize)
nand write 0x00800000 0x100000 $(filesize)
run bootcmd
```
3. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)
Installation steps nand bad blocks proof:
1. download initramfs-uImage and copy into usb ext2 partition
```
mkfs.ext2 -L ext2 /dev/sdh1
mount -t ext2 /dev/sdh1 /mnt
cp initramfs-uImage /mnt/initramfs.bin
umount /mnt
```
2. access uboot environment with serial cable and run
```
setenv mainlineLinux yes
setenv arcNumber 1682
setenv console 'console=ttyS0,115200n8'
setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
setenv bootargs_root 'root='
setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
saveenv
usb reset; ext2load usb 0:1 0x00800000 /initramfs.bin; bootm 0x00800000
```
3. log into openwrt and sysupgrade to install into flash
```
sysupgrade -n /tmp/sysupgrade.bin
```
4. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)
Signed-off-by: Ademar Arvati Filho <arvati@hotmail.com>
|
6 years ago | |
|---|---|---|
| .. | ||
| adm5120 | 6 years ago | |
| adm8668 | 6 years ago | |
| apm821xx | 6 years ago | |
| ar7 | 6 years ago | |
| ar71xx | 6 years ago | |
| arc770 | 6 years ago | |
| archs38 | 6 years ago | |
| armvirt | 6 years ago | |
| at91 | 6 years ago | |
| ath25 | 6 years ago | |
| ath79 | 6 years ago | |
| au1000 | 6 years ago | |
| bcm53xx | 6 years ago | |
| brcm47xx | 6 years ago | |
| brcm63xx | 6 years ago | |
| brcm2708 | 6 years ago | |
| cns3xxx | 6 years ago | |
| gemini | 6 years ago | |
| generic | 6 years ago | |
| imx6 | 6 years ago | |
| ipq40xx | 6 years ago | |
| ipq806x | 6 years ago | |
| ixp4xx | 6 years ago | |
| kirkwood | 6 years ago | |
| lantiq | 6 years ago | |
| layerscape | 6 years ago | |
| malta | 7 years ago | |
| mcs814x | 6 years ago | |
| mediatek | 6 years ago | |
| mpc85xx | 6 years ago | |
| mvebu | 6 years ago | |
| mxs | 6 years ago | |
| octeon | 6 years ago | |
| octeontx | 6 years ago | |
| omap | 6 years ago | |
| omap24xx | 6 years ago | |
| orion | 6 years ago | |
| oxnas | 6 years ago | |
| pistachio | 6 years ago | |
| ppc40x | 6 years ago | |
| ppc44x | 6 years ago | |
| ramips | 6 years ago | |
| rb532 | 6 years ago | |
| samsung | 6 years ago | |
| sunxi | 6 years ago | |
| uml | 6 years ago | |
| x86 | 6 years ago | |
| xburst | 6 years ago | |
| zynq | 6 years ago | |
| Makefile | ||