You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
209b368254
Hardware spec of DIR-842 C2: SoC: QCA9563 DRAM: 128MB DDR2 Flash: 16MB SPI-NOR Switch: QCA8337N WiFi 5.8GHz: QCA9888 WiFi 2.4Ghz: QCA9563 USB: 2.0 Flash instructions: 1. Upgrade the factory.bin through the factory web interface or the u-boot failsafe interface. The firmware will boot up correctly for the first time. Do not power off the device after OpenWrt has booted. Otherwise the u-boot will enter failsafe mode as the checksum of the firmware has been changed. 2. Upgrade the sysupgrade.bin in OpenWrt. After upgrading completes the u-boot won't complain about the firmware checksum and it's OK to use now. 3. If you powered off the device before upgrading the sysupgrade.bin, just upgrade the factory.bin through the u-boot failsafe interface and then goto step 2. Signed-off-by: Jackson Lim <jackcolentern@gmail.com> [Reword reset-hog comment, fix formatting] Signed-off-by: David Bauer <mail@david-bauer.net> |
5 years ago | |
---|---|---|
.. | ||
base-files | 5 years ago | |
dts | 5 years ago | |
files | 5 years ago | |
generic | 5 years ago | |
image | 5 years ago | |
nand | 6 years ago | |
patches-4.14 | 5 years ago | |
patches-4.19 | 5 years ago | |
tiny | 6 years ago | |
Makefile | 5 years ago | |
config-4.14 | 6 years ago | |
config-4.19 | 5 years ago | |
modules.mk | 6 years ago |