You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1e4ee63cc8
This patch adds support for TP-Link Archer A7 Specification: - SOC: QCA9563 - Flash: 16 MiB (SPI) - RAM: 128 MiB (DDR2) - Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN - Wireless: - 2.4GHz (bgn) SoC internal - 5GHz (ac) QCA988x - USB: 1x USB 2.0 port - Button: 1x power, 1x reset, 1x wps - LED: 10x LEDs - UART: holes in PCB - Vcc, GND, RX, TX from ethernet port side - 115200n8 Flash instructions: Upload openwrt-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin via the Webinterface. Flash instruction using tftp recovery: 1. Connect the computer to one of the LAN ports of the Archer A7 2. Set the computer IP to 192.168.0.66 3. Start a tftp server with the OpenWrt factory image in the tftp root directory renamed to ArcherC7v5_tp_recovery.bin 2. Connect power cable to Archer A7, press and hold the reset button and turn the router on 3. Keep the reset button pressed for ~5 seconds 4. Wait ~150 seconds to complete flashing Changes since first revision: - Flash instructions using stock image webinterface - Changed "Version 5" in model string to "v5" - Split DTS file in qca9563_tplink_archer-x7-v5.dtsi and qca9563_tplink_archer-a7-v5.dts - Firmware image is now build with dynamic partitioning - Default to ath10k-ct Changes since second revision: - Changed uboot@0 to uboot@20000 in DTS file - Fixed ordering issue in board led script - Specify firmware partition format in DTS file - Rebased Makefile device definition on common Device/tplink-safeloader-uimage definition - Merged switch section in network script (same configuration as tplink,tl-wdr3600 and tplink,tl-wdr4300) Signed-off-by: Karl-Felix Glatzer <karl.glatzer@gmx.de> |
6 years ago | |
---|---|---|
.github | 6 years ago | |
config | 6 years ago | |
include | 6 years ago | |
package | 6 years ago | |
scripts | 6 years ago | |
target | 6 years ago | |
toolchain | 6 years ago | |
tools | 6 years ago | |
.gitattributes | 12 years ago | |
.gitignore | 6 years ago | |
BSDmakefile | 17 years ago | |
Config.in | 7 years ago | |
LICENSE | 8 years ago | |
Makefile | 6 years ago | |
README | 6 years ago | |
feeds.conf.default | 6 years ago | |
rules.mk | 6 years ago |
README
_______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- This is the buildsystem for the OpenWrt Linux distribution. To build your own firmware you need a Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system. You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers installed. 1. Run "./scripts/feeds update -a" to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default 2. Run "./scripts/feeds install -a" to install symlinks for all obtained packages into package/feeds/ 3. Run "make menuconfig" to select your preferred configuration for the toolchain, target system & firmware packages. 4. Run "make" to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the Linux kernel & all chosen applications for your target system. Sunshine! Your OpenWrt Community http://www.openwrt.org