Commit Graph

90 Commits (a5cae0521e9385e342bff5dbaf3c8fbe71e85925)

Author SHA1 Message Date
John Crispin a5cae0521e Add Zyxel P-2812HNU-Fx images
P-2812HNU-Fx images are already supported but not generated.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40548
10 years ago
John Crispin a57ffc09a7 Add Fritz!Box 3370 images
Fritz!Box 3370 images are already supported but not generated.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40547
10 years ago
John Crispin 03a777c293 Refresh patches
Refresh uboot-lantiq patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40546
10 years ago
John Crispin 686a17e647 Create firmware directory if it doesn't exist
Fixes package refreshing.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40545
10 years ago
John Crispin 616f6da588 Depend on lantiq board
Depend on lantiq board.

ARV7510 depends on ARV4510 because (according to OpenWrt wiki) both boards are identical except for the unsupported WiFi. Moreover, ARV7510 isn't especifically supported and ARV4510 images valid.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40544
10 years ago
Luka Perkov 350dd0f9ac kobs-ng: Add support for overriding size
By default kobs-ng will use the size of /dev/mtd0 for the IMX bootstreams.
This patch allows overriding that size in order to reserve space at the end
of the mtd partition for u-boot.img in the case of using an SPL bootloader.

For example, to flash an SPL bootloader that loads u-boot.img from 0xe0000
(14MB) offset in a 16MB /dev/mtd0:

  kobs-ng init -v -x --search_exponent=1 --chip_0_size=0xe00000 SPL
  nandwrite --start=0xe00000 --pad /dev/mtd0 u-boot.img

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40532
10 years ago
John Crispin 13010f3adc lantiq: remove uboot lzma patch, apparently its not needed after all
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40521
10 years ago
John Crispin 69bac3e37e uboot-lantiq: backport lzma fix
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40520
10 years ago
Gabor Juhos daca4351b1 uboot-envtools: add support for the ZyXEL NBG6716 board
Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40501
10 years ago
John Crispin 3269f57c58 uboot-lantiq: enable parallel building
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40488
10 years ago
John Crispin dcbaee4e77 uboot-lantiq: reuse/copy VR9 GPHY firmware blobs from target/linux/lantiq
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40487
10 years ago
John Crispin 28fcb00b44 uboot-lantiq: add packages for AudioCodes MP-252
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40486
10 years ago
John Crispin dcf6f0e3f8 uboot-lantiq: add packages for various Arcadyan boards
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40485
10 years ago
John Crispin b949a631fe uboot-lantiq: add packages for Lantiq EASY80920
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40484
10 years ago
John Crispin de21f63d4a uboot-lantiq: add packages for Lantiq EASY50712
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40483
10 years ago
John Crispin 1246dce0b3 uboot-lantiq: update to v2013.10
Patches created from tree:
git@github.com:danielschwierzeck/u-boot-lantiq.git
v2013.10..u-boot-lantiq-v2013.10-openwrt4

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40482
10 years ago
Felix Fietkau a558ce7e21 grub2: disable mkfont - fix build on Archlinux
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 40350
10 years ago
Felix Fietkau fa4d4a62bf grub2: disable libdevmapper - fix build when it's available
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 40349
10 years ago
Felix Fietkau fbda3388f9 uboot-envtools: fix build with musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39961
10 years ago
Felix Fietkau 24095302aa grub2: update to 2.02-beta2, fixes mac os x 10.9 support (and many other things)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 39889
10 years ago
Zoltan Herpai 6892ed8193 uboot-sunxi: bump u-boot version - update u-boot to 2014.01-rc1 - smp support on a20
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>

SVN-Revision: 39779
10 years ago
Hauke Mehrtens 9a2493a004 kexec-tools: disable lzma support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39652
11 years ago
Nicolas Thill ece85d2d25 uboot-envtools: pass target cflags
SVN-Revision: 39629
11 years ago
Luka Perkov ddcd83e3df uboot-kirkwood: add support for Seagate GoFlexNet
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39594
11 years ago
Luka Perkov 777e7c3ff5 uboot-kirkwood: update to 2013.10
Tested on:

 * Cloud Engines Pogoplug E02
 * RaidSonic ICY BOX IB-NAS62x0
 * Iomega Iconnect

Some users are avoiding to replace their bootloader, because of that add
support for second stage u-boot image. Having ubifs capable bootloader is
required in order to boot current OpenWrt trunk.

Sample ib62x0 commands for running second stage bootloader:

tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
bootm 0x800000

Sample ib62x0 commands for flashing second stage bootloader:

tftpboot 0x800000 uboot-kirkwood-ib62x0_second_stage/openwrt-kirkwood-ib62x0_second_stage-u-boot.img
nand erase 0x100000 0x100000 ; nand write 0x800000 0x100000 0x${filesize}
nand read 0x800000 0x100000 0x100000 ; bootm 0x800000

While at it include parallel build support, use alphabetic order of the boards
and introduce common OpenWrt configuration.

Signed-off-by: Luka Perkov <luka@openwrt.org>
Tested-by (on ib62x0): Luka Perkov <luka@openwrt.org>
Tested-by (on dockstar): Alexander Couzens <lynxis@fe80.eu>
Tested-by (on iconnect): Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Felix Kaechele <heffer@fedoraproject.org>
CC: Wojciech Dubowik <wojciech.dubowik@neratec.com>
CC: Alexander Couzens <lynxis@fe80.eu>
CC: Daniel Engberg <daniel.engberg@pyret.net>
CC: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39590
11 years ago
Zoltan Herpai 66543935db uboot-sunxi: various fixes - update A10-Lime support - fix MMC on sun5i with initializing PLL6 correctly
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39470
11 years ago
Zoltan Herpai 16cbe62e9c sunxi: boot changes - Added uEnv.txt to facilitate automatic boot. - Cosmetic fix in u-boot Makefile - Don't force command line arguments
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39438
11 years ago
Luka Perkov ad48ba11db uboot-envtools: add support for wndr3700
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39380
11 years ago
John Crispin 9e39cd9503 kexec: bump to latest head revision
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39305
11 years ago
Zoltan Herpai 01a2ff6925 uboot-sunxi: - add support for Cubietruck - cosmetic change: have the options listed alphabetically
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39261
11 years ago
Zoltan Herpai f8911b3197 uboot-sunxi: add support for Olinuxino A10 LIME
Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39221
11 years ago
Imre Kaloz 7aaa9bc91c add x86_64 target support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39208
11 years ago
Zoltan Herpai c2f62ecc25 add support for pcDuino board
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39192
11 years ago
Zoltan Herpai 4800b2c723 update version
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 39191
11 years ago
Imre Kaloz 1eff212ce8 fix jffs2 with internal libgcc and switch omap4 to ext4
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 39044
11 years ago
Imre Kaloz f6b57149af FPU type should not interfere with the ABI selection. Also make sure we either do real soft-float or hard-float on ARM, with the right options.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38943
11 years ago
Imre Kaloz 4c3f2ed4ca hide package, it's needed all the time
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38924
11 years ago
Imre Kaloz 3b2c74e5db use plain image names inside the target directories
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38923
11 years ago
Zoltan Herpai 17089f3f37 package: uboot-mxs: cosmetic fix
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38875
11 years ago
Zoltan Herpai 5fa0e4fac0 uboot-sunxi: add U-boot builds for a couple sunxi boards
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38785
11 years ago
Zoltan Herpai 65f747a42d mxs: - update uboot-mxs to 3.10 - enable building uboot for imx23 along sbImage by default - (doc updated)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38781
11 years ago
Zoltan Herpai dcd8a08be1 uboot-envtools: add support for mxs target
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 38776
11 years ago
Zoltan Herpai b0b78d541d mxs: rename uboot-imx23 to uboot-mxs
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38774
11 years ago
Imre Kaloz 1381fa6c5c rename the omap4 target to omap
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38691
11 years ago
Imre Kaloz b27b8b5bdd use a single package to build MLO/u-boot for all omap boards
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38626
11 years ago
Luka Perkov ed676cf0ff uboot-imx6: update to 2013.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38625
11 years ago
Gabor Juhos 6b604495a4 uboot-ar71xx: make it depend on the generic ar71xx subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38599
11 years ago
Felix Fietkau e31ccd95c7 u-boot: prefer mirror2.openwrt.org over ftp.denx.de - the denx ftp is slow and unreliable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38559
11 years ago
Luka Perkov 494bc1d026 uboot-envtools: update to 2013.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38444
11 years ago
Luka Perkov c15bec4a1b uboot-envtools: update kirkwood scripts
Also, scripts can be installed as data so let's change that here too.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38403
11 years ago