use a single package to build MLO/u-boot for all omap boards
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 38626v19.07.3_mercusys_ac12_duma
Imre Kaloz
11 years ago
parent
ed676cf0ff
commit
b27b8b5bdd
@ -1,91 +0,0 @@
|
||||
#
|
||||
# Copyright (C) 2011 OpenWrt.org
|
||||
#
|
||||
# This is free software, licensed under the GNU General Public License v2.
|
||||
# See /LICENSE for more information.
|
||||
#
|
||||
|
||||
include $(TOPDIR)/rules.mk
|
||||
include $(INCLUDE_DIR)/kernel.mk
|
||||
|
||||
PKG_NAME:=u-boot
|
||||
PKG_VERSION:=2010.12
|
||||
PKG_RELEASE:=1
|
||||
|
||||
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
|
||||
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
|
||||
PKG_SOURCE_URL:= \
|
||||
http://mirror2.openwrt.org/sources \
|
||||
ftp://ftp.denx.de/pub/u-boot
|
||||
PKG_MD5SUM:=
|
||||
PKG_TARGETS:=bin
|
||||
|
||||
include $(INCLUDE_DIR)/package.mk
|
||||
|
||||
define uboot/Default
|
||||
TITLE:=
|
||||
CONFIG:=
|
||||
IMAGE:=
|
||||
endef
|
||||
|
||||
define uboot/omap3_overo
|
||||
TITLE:=U-boot for the gumstix board
|
||||
endef
|
||||
|
||||
UBOOTS:=omap3_overo
|
||||
|
||||
define Package/uboot/template
|
||||
define Package/uboot-omap35xx-$(1)
|
||||
SECTION:=boot
|
||||
CATEGORY:=Boot Loaders
|
||||
DEPENDS:=@TARGET_omap35xx
|
||||
TITLE:=$(2)
|
||||
URL:=http://www.denx.de/wiki/U-Boot
|
||||
VARIANT:=$(1)
|
||||
endef
|
||||
endef
|
||||
|
||||
define BuildUbootPackage
|
||||
$(eval $(uboot/Default))
|
||||
$(eval $(uboot/$(1)))
|
||||
$(call Package/uboot/template,$(1),$(TITLE))
|
||||
endef
|
||||
|
||||
|
||||
ifdef BUILD_VARIANT
|
||||
$(eval $(call uboot/$(BUILD_VARIANT)))
|
||||
UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
|
||||
UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin)
|
||||
endif
|
||||
|
||||
define Build/Prepare
|
||||
$(call Build/Prepare/Default)
|
||||
$(CP) ./files/* $(PKG_BUILD_DIR)
|
||||
find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
|
||||
endef
|
||||
|
||||
define Build/Configure
|
||||
$(MAKE) -C $(PKG_BUILD_DIR) \
|
||||
$(UBOOT_CONFIG)_config
|
||||
endef
|
||||
|
||||
define Build/Compile
|
||||
$(MAKE) -C $(PKG_BUILD_DIR) \
|
||||
CROSS_COMPILE=$(TARGET_CROSS)
|
||||
endef
|
||||
|
||||
define Package/uboot/install/template
|
||||
define Package/uboot-omap35xx-$(1)/install
|
||||
$(INSTALL_DIR) $$(1)
|
||||
$(CP) $(PKG_BUILD_DIR)/u-boot.bin $(BIN_DIR)/$(2)
|
||||
endef
|
||||
endef
|
||||
|
||||
$(foreach u,$(UBOOTS), \
|
||||
$(eval $(call Package/uboot/install/template,$(u),openwrt-$(BOARD)-$(u)-u-boot.bin)) \
|
||||
)
|
||||
|
||||
$(foreach u,$(UBOOTS), \
|
||||
$(eval $(call BuildUbootPackage,$(u))) \
|
||||
$(eval $(call BuildPackage,uboot-omap35xx-$(u))) \
|
||||
)
|
||||
@ -1,316 +0,0 @@
|
||||
/*
|
||||
* Configuration settings for the Gumstix Overo board.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
*/
|
||||
#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
|
||||
#define CONFIG_OMAP 1 /* in a TI OMAP core */
|
||||
#define CONFIG_OMAP34XX 1 /* which is a 34XX */
|
||||
#define CONFIG_OMAP3430 1 /* which is in a 3430 */
|
||||
#define CONFIG_OMAP3_OVERO 1 /* working with overo */
|
||||
|
||||
#define CONFIG_SDRC /* The chip has SDRC controller */
|
||||
|
||||
#include <asm/arch/cpu.h> /* get chip and board defs */
|
||||
#include <asm/arch/omap3.h>
|
||||
|
||||
/*
|
||||
* Display CPU and Board information
|
||||
*/
|
||||
#define CONFIG_DISPLAY_CPUINFO 1
|
||||
#define CONFIG_DISPLAY_BOARDINFO 1
|
||||
|
||||
/* Clock Defines */
|
||||
#define V_OSCK 26000000 /* Clock output from T2 */
|
||||
#define V_SCLK (V_OSCK >> 1)
|
||||
|
||||
#undef CONFIG_USE_IRQ /* no support for IRQs */
|
||||
#define CONFIG_MISC_INIT_R
|
||||
|
||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1
|
||||
#define CONFIG_INITRD_TAG 1
|
||||
#define CONFIG_REVISION_TAG 1
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
|
||||
/* Sector */
|
||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
|
||||
/* initial data */
|
||||
|
||||
/*
|
||||
* Hardware drivers
|
||||
*/
|
||||
|
||||
/*
|
||||
* NS16550 Configuration
|
||||
*/
|
||||
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
|
||||
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
||||
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
|
||||
|
||||
/*
|
||||
* select serial console configuration
|
||||
*/
|
||||
#define CONFIG_CONS_INDEX 3
|
||||
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
|
||||
#define CONFIG_SERIAL3 3
|
||||
|
||||
/* allow to overwrite serial and ethaddr */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \
|
||||
115200}
|
||||
#define CONFIG_GENERIC_MMC 1
|
||||
#define CONFIG_MMC 1
|
||||
#define CONFIG_OMAP_HSMMC 1
|
||||
#define CONFIG_DOS_PARTITION 1
|
||||
|
||||
/* DDR - I use Micron DDR */
|
||||
#define CONFIG_OMAP3_MICRON_DDR 1
|
||||
|
||||
/* commands to include */
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_CACHE
|
||||
#define CONFIG_CMD_EXT2 /* EXT2 Support */
|
||||
#define CONFIG_CMD_FAT /* FAT support */
|
||||
#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
|
||||
|
||||
#define CONFIG_CMD_I2C /* I2C serial bus support */
|
||||
#define CONFIG_CMD_MMC /* MMC support */
|
||||
#define CONFIG_CMD_NAND /* NAND support */
|
||||
|
||||
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
|
||||
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
|
||||
#undef CONFIG_CMD_IMI /* iminfo */
|
||||
#undef CONFIG_CMD_IMLS /* List all found images */
|
||||
#undef CONFIG_CMD_NFS /* NFS support */
|
||||
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
|
||||
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
#define CONFIG_HARD_I2C 1
|
||||
#define CONFIG_SYS_I2C_SPEED 100000
|
||||
#define CONFIG_SYS_I2C_SLAVE 1
|
||||
#define CONFIG_SYS_I2C_BUS 0
|
||||
#define CONFIG_SYS_I2C_BUS_SELECT 1
|
||||
#define CONFIG_I2C_MULTI_BUS 1
|
||||
#define CONFIG_DRIVER_OMAP34XX_I2C 1
|
||||
|
||||
/*
|
||||
* TWL4030
|
||||
*/
|
||||
#define CONFIG_TWL4030_POWER 1
|
||||
#define CONFIG_TWL4030_LED 1
|
||||
|
||||
/*
|
||||
* Board NAND Info.
|
||||
*/
|
||||
#define CONFIG_SYS_NAND_QUIET_TEST 1
|
||||
#define CONFIG_NAND_OMAP_GPMC
|
||||
#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
|
||||
/* to access nand */
|
||||
#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
|
||||
/* to access nand */
|
||||
/* at CS0 */
|
||||
#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
|
||||
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
|
||||
/* devices */
|
||||
#define CONFIG_JFFS2_NAND
|
||||
/* nand device jffs2 lives on */
|
||||
#define CONFIG_JFFS2_DEV "nand0"
|
||||
/* start of jffs2 partition */
|
||||
#define CONFIG_JFFS2_PART_OFFSET 0x680000
|
||||
#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */
|
||||
/* partition */
|
||||
|
||||
/* Environment information */
|
||||
#define CONFIG_BOOTDELAY 5
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"loadaddr=0x82000000\0" \
|
||||
"console=ttyO2,115200n8\0" \
|
||||
"mpurate=500\0" \
|
||||
"vram=12M\0" \
|
||||
"dvimode=1024x768MR-16@60\0" \
|
||||
"defaultdisplay=dvi\0" \
|
||||
"mmcdev=0\0" \
|
||||
"mmcroot=/dev/mmcblk0p2 rw\0" \
|
||||
"mmcrootfstype=ext3 rootwait\0" \
|
||||
"nandroot='ubi0:rootfs ubi.mtd=5 ubi.mtd=6 ubi.mtd=7'\0" \
|
||||
"nandrootfstype=ubifs\0" \
|
||||
"mmcargs=setenv bootargs console=${console} " \
|
||||
"mpurate=${mpurate} " \
|
||||
"vram=${vram} " \
|
||||
"omapfb.mode=dvi:${dvimode} " \
|
||||
"omapfb.debug=y " \
|
||||
"omapdss.def_disp=${defaultdisplay} " \
|
||||
"root=${mmcroot} " \
|
||||
"rootfstype=${mmcrootfstype}\0" \
|
||||
"nandargs=setenv bootargs console=${console} " \
|
||||
"mpurate=${mpurate} " \
|
||||
"vram=${vram} " \
|
||||
"omapfb.mode=dvi:${dvimode} " \
|
||||
"omapfb.debug=y " \
|
||||
"omapdss.def_disp=${defaultdisplay} " \
|
||||
"root=${nandroot} " \
|
||||
"rootfstype=${nandrootfstype}\0" \
|
||||
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
|
||||
"bootscript=echo Running bootscript from mmc ...; " \
|
||||
"source ${loadaddr}\0" \
|
||||
"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
|
||||
"mmcboot=echo Booting from mmc ...; " \
|
||||
"run mmcargs; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
"nandboot=echo Booting from nand ...; " \
|
||||
"run nandargs; " \
|
||||
"nand read ${loadaddr} 280000 200000; " \
|
||||
"bootm ${loadaddr}\0" \
|
||||
|
||||
#define CONFIG_BOOTCOMMAND \
|
||||
"if mmc rescan ${mmcdev}; then " \
|
||||
"if run loadbootscript; then " \
|
||||
"run bootscript; " \
|
||||
"else " \
|
||||
"if run loaduimage; then " \
|
||||
"run mmcboot; " \
|
||||
"else run nandboot; " \
|
||||
"fi; " \
|
||||
"fi; " \
|
||||
"else run nandboot; fi"
|
||||
|
||||
#define CONFIG_AUTO_COMPLETE 1
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
#define CONFIG_SYS_PROMPT "Overo # "
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command */
|
||||
/* args */
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
/* memtest works on */
|
||||
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
|
||||
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
|
||||
0x01F00000) /* 31MB */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
|
||||
/* address */
|
||||
/*
|
||||
* OMAP3 has 12 GP timers, they can be driven by the system clock
|
||||
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
|
||||
* This rate is divided by a local divisor.
|
||||
*/
|
||||
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
|
||||
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Stack sizes
|
||||
*
|
||||
* The stack sizes are set up in start.S using the settings below
|
||||
*/
|
||||
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
|
||||
#ifdef CONFIG_USE_IRQ
|
||||
#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
|
||||
#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
|
||||
#endif
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Physical Memory Map
|
||||
*/
|
||||
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
|
||||
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
|
||||
#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
|
||||
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
|
||||
|
||||
/* SDRAM Bank Allocation method */
|
||||
#define SDRC_R_B_C 1
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH and environment organization
|
||||
*/
|
||||
|
||||
/* **** PISMO SUPPORT *** */
|
||||
|
||||
/* Configure the PISMO */
|
||||
#define PISMO1_NAND_SIZE GPMC_SIZE_128M
|
||||
#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
|
||||
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
|
||||
|
||||
#define CONFIG_SYS_FLASH_BASE boot_flash_base
|
||||
|
||||
/* Monitor at start of flash */
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
||||
#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
|
||||
|
||||
#define CONFIG_ENV_IS_IN_NAND 1
|
||||
#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */
|
||||
#define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */
|
||||
|
||||
#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
|
||||
#define CONFIG_ENV_OFFSET boot_flash_off
|
||||
#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
extern unsigned int boot_flash_base;
|
||||
extern volatile unsigned int boot_flash_env_addr;
|
||||
extern unsigned int boot_flash_off;
|
||||
extern unsigned int boot_flash_sec;
|
||||
extern unsigned int boot_flash_type;
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_CMD_NET)
|
||||
/*----------------------------------------------------------------------------
|
||||
* SMSC9211 Ethernet from SMSC9118 family
|
||||
*----------------------------------------------------------------------------
|
||||
*/
|
||||
|
||||
#define CONFIG_NET_MULTI
|
||||
#define CONFIG_SMC911X 1
|
||||
#define CONFIG_SMC911X_32_BIT
|
||||
#define CONFIG_SMC911X_BASE 0x2C000000
|
||||
|
||||
#endif /* (CONFIG_CMD_NET) */
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
||||
CONFIG_SYS_INIT_RAM_SIZE - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue