Commit Graph

202 Commits (2d04407e404183f72901b4fdb53c4625518b0bd9)

Author SHA1 Message Date
Luka Perkov 02629d8f87 kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
10 years ago
Luka Perkov 9ccacbaa40 imx6: fix image build for Generic profile.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42455
10 years ago
Luka Perkov 20f48d27ea imx6: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42297
10 years ago
Luka Perkov eb75d320d1 imx6: kernel: backport upstream fix for IMX6DL 800MHz speed grade
A previous backported patch that adds freq/voltage operating points for the
IMX6DL processor can cause hang/crash (general instability) on IMX6DL
processors in the industrial/automative speed grades as they don't support
1GHz operation.

This adds another backported patch from mainline that uses IMX6 fuse settings
to properly remove invalid operating points for the particular CPU grade used.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42294
10 years ago
Luka Perkov 24696a06ad imx6: update kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42149
10 years ago
Luka Perkov fa8e8d262e imx6: kernel: add GW5520 support
The GW5520 is a small form-factor single-board computer with the following
features:
 * 70x100mm form-factor
 * IMX6DL 800MHz SoC (IMX6Q optional)
 * 512MB 32bit DDR3 SDRAM (up to 2GB optional)
 * 256MB NAND FLASH (up to 2GB optional)
 * Gateworks System Controller
 * 2x front-panel Intel i210 GbE adapters with passive PoE support
 * 2x MiniPCIe sockets with USB support
 * 2x front-panel USB
 * 1x rear-panel full-size HDMI connector
 * 1x front-panel bi-color user LED
 * 1x front-panel user pushbutton
 * 1x rear-panel barrel jack for power
 * 1x Application connector with:
  * 2x TTL level UARTs
  * 10x TTL level Digital IO

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42148
10 years ago
Luka Perkov dcacd65281 imx6: kernel: add GW16083 Ethernet Expansion Mezzanine support
The GW16083 Ethernet Expansion Mezzanine adds the following to supported
Gateworks baseboards:
 * 7-port Ethernet Switch
  * 4x RJ45 ports (ENET1-4) supporing 802.11af/at PoE (with optional PoE module)
  * 2x RJ45 ports or SFP module (ENET5-6) (auto-selected)

This series adds support for a phy driver that adds support for ENET5/ENET6
PHY adding initialization for those PHY's and a polling mechanism that detects
SFP insertion and configuration.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42147
10 years ago
Luka Perkov 9d826428b7 imx6: kernel: add GW16082 miniPCI Expansion Mezzanine support
The GW16082 miniPCI Expansion Mezzanine has the INTA/B/C/D IRQ's reversed
from the PCI standard. This will soon be resolved in the bootloader via
devicetree, but in the meantime this will work around the issue.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42146
10 years ago
Luka Perkov e47c4d7014 imx6: kernel: fix occasional link failure
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42145
10 years ago
Luka Perkov fe5d39d66c imx6: kernel: backport an upstream pci hang fix
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42144
10 years ago
Luka Perkov 97f26cad16 imx6: update upstream patch
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42081
10 years ago
Luka Perkov c84876702b imx6: drop 3.10 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42075
10 years ago
Luka Perkov 4c2c390a23 imx6: switch to 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42074
10 years ago
Luka Perkov 60fe58100c imx6: update upstream patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42073
10 years ago
Luka Perkov d5f94a4122 imx6: backport IMX6DL DVFS support from 3.15
This allows dynamic voltage and frequency scaling to work for IMX6DL CPU's.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 42072
10 years ago
Luka Perkov 2b6d364a2d imx6: drop ventana kernel/rootfs hack
In r41578 this was added in order to make default images bootable for the BB
release. We need more generic approach for this.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42071
10 years ago
John Crispin 7d8f187201 target/linux/*/image/Makefile: use new dts path variable
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41791
10 years ago
John Crispin ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
10 years ago
Gabor Juhos d0ad8c00b6 kernel: sort Kconfig options in kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41614
10 years ago
John Crispin f88fde9689 imx6: put kernel and dtb into rootfs by default
this will make the rc1 images boot with the default config.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41578
10 years ago
John Crispin 994e5ce2f9 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
10 years ago
Luka Perkov fa0b9bccea imx6: move imx6.sh to /lib/ for consistency
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41339
10 years ago
John Crispin cf80a59dcc imx6: add sysupgrade support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41277
10 years ago
John Crispin 1a60486acb imx6: the script populating /tmp/sysinfo/ was in the wrong path
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41276
10 years ago
Florian Fainelli 43c0ad0f00 imx6: fix typo on wandboard detection
Revision r41256 introduced a typo (wandaboard => wandboard), but later
revisions expect to match on "wandboard"

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 41262
10 years ago
John Crispin efcec0faaf imx6: use /lib/imx6.sh inside the uci-defaults script
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41257
10 years ago
John Crispin 2773bdfebf imx6: add a script to detect the board name and populate /tmp/sysinfo
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41256
10 years ago
John Crispin e9f664c879 kernel: make sure the new UBIBLOCK symbol does not break builds
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41134
10 years ago
John Crispin ac5d5cbc79 kernel: add a NAND_SUPPORT symbol
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41122
10 years ago
Luka Perkov 284a07f748 imx6: kernel: update 3.14 pcie patches
Remove old irq map patch and replace it with the propper upstream patches
allowing IMX6 PCIe devices behind PCIe switches to work properly.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 41004
10 years ago
Luka Perkov cdd9e952e5 imx6: ventana: remove non-trunk packages from defaults
The canutils package is in the packages repo and not part of trunk, so we
should not enable them by default.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40991
10 years ago
Luka Perkov be7396bad7 imx6: ventana: add default kernel modules
Add the following kernel modules by default (which are present on most Ventana
baseboards):
 - kmod-leds-gpio (user leds)
 - kmod-sound-core (required as a dependency of the other sound modules)
 - kmod-pps-gpio (Pulse-Per-Second)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40990
10 years ago
Luka Perkov f637a1e562 imx6: update board names per device-tree updates
The Gateworks Ventana board names have been adjusted per upstream patches
to include all IMX6 SoC variants.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40989
10 years ago
Luka Perkov b87016722c imx6: update 3.14 ventana dts with upstream fixes
update the Ventana DTS files with upstream fixes:
 - The 'model' property in the imx-audio-sgtl5000 binding specifies the
   user-visible name of the audio device. This should be something common and
   not baseboard specific.
 - removed obsolete crts
 - fix include typo: The imx6q-gw51xx needs to include imx6qdl-gw51xx.dtsi
 - fix gw52xx clock for sgtl5000 ananlog audio codec
 - fix LVDS mapping for Ventana GW52xx/GW53xx/GW54xx
 - add LVDS backlight for Ventana
 - update model descriptions for all processor variants

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40988
10 years ago
Luka Perkov f689e3cf8b imx6: update 3.10 ventana dts
update the Ventana DTS files with upstream fixes:
 - The 'model' property in the imx-audio-sgtl5000 binding specifies the
   user-visible name of the audio device. This should be something common an
   not baseboard specific.
 - update model descriptions for all processor variants

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40987
10 years ago
Luka Perkov e37e0f17ed imx6: make boardname consistent with other targets
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 40758
10 years ago
Luka Perkov dce36465ad imx6: drop support for 3.13
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40754
10 years ago
Luka Perkov aa3d844d34 imx6: add support for 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40753
10 years ago
Luka Perkov b58e65f2ee imx6-gateworks: enable new canbus packages
The canbus package was recently changed to a more active project. This patch
updates the default package names to include the same functionality as before.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 40531
10 years ago
Gabor Juhos d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
10 years ago
Gabor Juhos 627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
10 years ago
Luka Perkov f7f117b88d imx6: optimize for NEON FPU hardware
The IMX6 SoC uses an ARM Cortext-A9 which has both NEON and VFPv3 hardware
blocks.  This will tune gcc to use neon instead of vfpv3 which will outperform
VFPv3.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39760
11 years ago
Luka Perkov 6752d4cb08 imx6: enable FPU for hard float
The OpenWrt build system uses MACHINE_FEATURES of fpu to set the HAS_FPU which
in turn sets the default of CONFIG_SOFT_FLOAT as well as uClibc configuration.
As the IMX6 SoC has both vfpv3 and NEON hardware support we want to add fpu
to the feature list.  This will default the IMX6 target to use -mfloat-abi=hard
which will the be most efficient use of floating point.

When switching to hard float, we also need to enable VFP support in the kernel.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39759
11 years ago
Gabor Juhos f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
11 years ago
Luka Perkov 223c6808ba imx6: update Ventana dts
Update the Ventana device-tree to match upstream:
 - Add IMX6Q/IMX6DL variants for GW54xx/GW53xx/GW52xx/GW51xx
 - align pinctrl with upstream
 - consolidate multiple patches into one

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39644
11 years ago
Luka Perkov a52100469f imx6: enable IMX6 watchdog
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39643
11 years ago
Luka Perkov fcbfe67e2a imx6: drop upstream rejected patch
http://article.gmane.org/gmane.linux.drivers.i2c/17891

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39639
11 years ago
Luka Perkov ef5c3bbb5f imx6: drop 3.12 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39574
11 years ago
Luka Perkov 3203599a7d imx6: add initial 3.13 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39573
11 years ago
Gabor Juhos a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
11 years ago
Gabor Juhos 0e2586a774 kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
11 years ago
Luka Perkov 5db5354c70 imx6: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39135
11 years ago
Luka Perkov 1e9161528b imx6: proper fix for io-remap
The previous patch was not the proper fix for PCI devices that require io
resources.  The new patch is the proper fix backported from mainline.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39133
11 years ago
Luka Perkov b27f84034b imx6: ventana: add canbus utils
Some of the Gateworks Ventana boards have CAN bus support, therefore
we will install the userspace utils.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39113
11 years ago
Luka Perkov 7802f4619b imx6: ventana: add default kernel modules for GSC
All Gateworks Ventana boards have a Gateworks System Controller
which emulates the following:
 - ds1672 RTC
 - pca953x GPIO expander
 - hardware monitor
 - at24 eeprom

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39112
11 years ago
Luka Perkov 325a4f5b6e imx6: add rtc feature support
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39111
11 years ago
Luka Perkov ccf1ee93d9 imx6: drop upstreamed patch
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39109
11 years ago
Hauke Mehrtens 952db22551 kernel: update kernel 3.10 to 3.10.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
11 years ago
Luka Perkov ceb57f139d imx6: add canbus support for Ventana boards
GW5400, GW5300, and GW5200 have CAN bus option.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39034
11 years ago
Luka Perkov 2bbd43d065 imx6: add flexcan support
backport upstream changes to 3.10:
 - 0060-flexcan.patch:
   - add flexcan pinctrl and devicetree config
 - 0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch
   - fix a clock issue
 - 0062-ARM-i.MX6q-fix-the-wrong-parent-of-can_root-clock.patch
   - fix a clock issue

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39033
11 years ago
Luka Perkov c8753ca97c imx6: add support for GW53xx
The Gateworks GW53xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:

 * i.MX6DL
 * NAND FLASH
 * 4x PCIe
 * 4x USB EHCI (1x front-panel; 3x PCIe sockets)
 * 1x USB OTG
 * 1x uSD
 * LVDS connector (VLDS for display, PWM/GPIO for backlight, i2c for touch)
 * HDMI Audio/Video out
 * Analog Video in
 * Digital IO
 * Gateworks System Controller
 * Accelerometer
 * Canbus
 * Optional GPS
 * Industrial temp (-40C to +85C)
 * DC input voltage 8 to 42V (Passive PoE and 802.3af)

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39012
11 years ago
Luka Perkov 7523aa05c1 imx6: add DMA/SDMA support for 3.12
DMA and SDMA support are needed for ssi based audio.  Note that the sdma
firmware is no longer required for ssi audio.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 39011
11 years ago
Luka Perkov c9ee51ad38 imx6: drop upstreamed patch
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 39010
11 years ago
Gabor Juhos f1ef0b92be kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
11 years ago
Luka Perkov 35b6be4a65 imx6: build images for ventana boards that are supported
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38859
11 years ago
Luka Perkov c108ddb209 imx6: merge all gateworks boards into one profile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38858
11 years ago
Luka Perkov f552d290c6 imx6: add support for more then one nand type per profile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38857
11 years ago
Luka Perkov 69beb313c6 imx6: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38856
11 years ago
Gabor Juhos 35656042f1 kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
11 years ago
Luka Perkov da224973af imx6: drop unused variable from Makefile
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38650
11 years ago
Luka Perkov 59d58990fb imx6: minor image cleanup
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38628
11 years ago
Luka Perkov 672a8cd6ba imx6: update patches
Changes include PCI fixes and various upstream pending patches.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38624
11 years ago
Luka Perkov 6b2c29d5f0 imx6: update gateworks profile with extra packages
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38579
11 years ago
Luka Perkov df388048b4 imx6: add initial 3.12 support
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38574
11 years ago
Luka Perkov b8038b78ec imx6: use upstream gateworks board names
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38573
11 years ago
Luka Perkov f44c65c7c8 imx6: update 3.10 patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38571
11 years ago
Luka Perkov a494a0027a imx6: ventana boards use kmod-sky2
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38522
11 years ago
Luka Perkov 37c040f41a imx6: use more descriptive function name
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38521
11 years ago
Luka Perkov de7c615cfe imx6: use more common name for ubi(fs) images
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38520
11 years ago
Luka Perkov 9e17f251d5 imx6: fix pcie interrupt mapping
The interrupt mapping for legacy interrupts was backwards causing interrupts
to be mapped improperly behind a PCIe to PCI bridge (ie GW16082 mezzanine).

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38519
11 years ago
Luka Perkov 2f4ae98018 imx6: add support for building uImage
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38518
11 years ago
Luka Perkov 86aff32701 imx6: enable SATA support
Enable SATA support (for IMX6D/IMX6Q) static in the kernel.  It seems there
are some issues causing the driver to not load properly when built as
a module which still need to be worked out.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38515
11 years ago
Luka Perkov 44ae9a2b7a imx6: enable cpufreq
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38514
11 years ago
Luka Perkov 70d75dc068 imx6: enable i2c-dev
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38513
11 years ago
Luka Perkov cdcce432d0 imx6: remove obsolete files
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38512
11 years ago
Luka Perkov cd43416a78 imx6: pcie driver fixups
Add upstream patches needed for PCIe through a switch.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38511
11 years ago
Luka Perkov a0c9c711cd imx6: fix symlink of dtb files
Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38510
11 years ago
Gabor Juhos b6b06000eb kernel: update 3.10 to 3.10.17
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
11 years ago
Luka Perkov 38aefbfa8d imx6: make symlinks for dtb's
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38496
11 years ago
Luka Perkov ee5b7c2859 imx6: reorganize build system
Changes include:

 * switching to profiles
 * adding ubifs support
 * building image for GW54XX board

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38441
11 years ago
Luka Perkov 59eb6137dd build: drop FIT option until we actually need it
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38439
11 years ago
Luka Perkov 416d58a3d6 imx6: fix file names when building images
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38434
11 years ago
Luka Perkov 0102284bbd imx6: enable FIT images
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38432
11 years ago
Luka Perkov acdb0ac35c build: move mkits.sh script to more common place
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38430
11 years ago
Luka Perkov 39ba5482d0 imx6: enable fixed voltage reulator
Fixed voltage regulator support is required by several drivers that have
regulator consumers, such as the sgtl5000 audio codec used on many i.MX6
boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38426
11 years ago
Luka Perkov 0a0ac79cb7 imx6: add support for gw52xx
The Gateworks GW51xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:

 * i.MX6DL 512MB DDR3
 * 256MB NAND FLASH
 * 2x PCIe
 * 1x USB EHCI (to PCIe socket2)
 * 1x USB OTG (to front panel or PCIe socket1)
 * 1x uSD
 * LVDS
 * HDMI AudioVideo out
 * Analog Video in
 * Digital IO
 * Gateworks System Controller

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38425
11 years ago
Luka Perkov 365ed4d22f imx6: dts: update ventana dts
- fix spi chipselect for GW5400-A
- fix audmux pinctrl for GW54xx
- remove unused alias nodes
- remove unused regulator nodes (will be adding pmic nodes next)
- remove duplicate eeprom entries
- add regulator definitions
- fix sgtl5000 regulator reference
- add egalax touchscreen controller interrupt
- fix gw5400-a audmux pinctrl
- fix usb ehci alias

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38424
11 years ago
Luka Perkov 662e3943ff imx6: split out ventana init patch from devicetree
SVN-Revision: 38423
11 years ago
Luka Perkov adb70acecb imx6: add pfuze100 regulator support
- backport driver
- apply patch to allow misprogrammed parts
- enable driver in kernel

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 38422
11 years ago
Luka Perkov 88590e4cb7 imx6: minor (cosmetic) changes in uci-defaults
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38421
11 years ago