1871619e72
base-files: config_generate: add missing chunks of force tag support
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47718
9 years ago
de51026515
ramips: switch ucidef_add_switch_vlan() to ucidef_add_switch_ports()
...
This migrates the final board.d user of ucidef_add_switch_vlan() to the new
ucidef_add_switch_ports() approach, fixing some logic errors for a few boards
along the way.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47717
9 years ago
2a68bea073
kernel: backport support for m25p80 compatible="jedec,spi-nor" in DT
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47716
9 years ago
e4d186b109
uClibc-ng: update to 1.0.9
...
Update to 1.0.9, switch to XZ tarball.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
SVN-Revision: 47715
9 years ago
b9849f286b
kernel: add overlayfs stacking fix from upstream
...
Overlayfs stacking was broken in 4.1.12 but now fixed in upstream branch.
Stacking allows experimenting with configurations without the need to
reset a device to factory config.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47714
9 years ago
2bcbe28580
bcm53xx: move BCM5301X patches to use 08x prefix
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47713
9 years ago
418a9d4972
mac80211: put the !LINUX_4_4 dependency in the right place
...
Make sure all sub packages are marked as not building for 4.4.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47712
9 years ago
9f3300393a
bcm53xx: use backported versiions or R8000 & dt-bindings patches
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47711
9 years ago
0dda38b472
bcm53xx: fix typo in BCM5310X (patch name and subject)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47710
9 years ago
4333cb73f7
bcm53xx: move & update accepted USB patch for GPIO control
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47709
9 years ago
448bf7819b
bcm53xx: use backported BCM5301X patches from stblinux devicetree/next
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47708
9 years ago
7eed5caecd
bcm53xx: use backported BCM5301X patches from stblinux soc/next
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47707
9 years ago
4e837fa130
bcm53xx: set vcc-gpio properties in one patch
...
No reason to handle Buffalo WXR-1900DHP in separated patch.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47706
9 years ago
0641728fa2
bcm53xx: drop fixed clock from DTS for Buffalo WXR-1900DHP
...
We don't use fixed clock in 4.4 (and 4.3) anymore.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47705
9 years ago
2766887751
bcm53xx: update linux 4.4 config
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47704
9 years ago
d90561c929
bcm53xx: add linux 4.4 support
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47703
9 years ago
e395433178
brcm63xx: add linux 4.4 support
...
Only netboot tested. Flash at your own risk.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47702
9 years ago
621677154f
kernel: add linux 4.4 support
...
Based on 4.4-rc3. Runtime tested on MIPS.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47701
9 years ago
4454a3fb63
package: kernel: update dependencies for 4.4
...
Update dependencies for linux 4.4 and mark as broken where source code
needs updating.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47700
9 years ago
9c0ca6082d
xtables-addons: update to 2.10
...
Fixes compilation with linux 4.4.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47699
9 years ago
30a21f5acb
kernel-version: drop 4.0 remnants
...
We don't support 4.0 anymore and it is EOL anyway.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47698
9 years ago
d12502b666
brcm63xx: Add NuCom R5010UNv2 support
...
This patch adds support for the NuCom R5010UNv2.
It's a BCM6328 based board. It has an onboard BCM43217 wifi chip. For this
wifi chip looks like the brcmsmac driver isn't still supported, b43 drivers are used
for the profile of the router.
It's worth mentioning this board was affected by a bug solved with
https://dev.openwrt.org/changeset/46707
Tested-by: Angel Fontan <angel.fontan@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47697
9 years ago
9d7e058a23
brcm63xx: drop 3.18 support
...
Drop 3.18 support; it will live on in CC.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47696
9 years ago
e9390dcf23
ipq806x: ap148/r7500: fix eth0 for non gige speeds
...
Eth0 is attached to mac0 of the switch with a fixed link and and not to
phy4 in single phy mode, so configuring it to anything but 1000FD will
break the connection, which will happen if a only 100 Mbit capapble device
is plugged into the wan port.
Fix this by not taking the state from phy4 and just configuring a fixed link
for eth0.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 47695
9 years ago
f0a5f24217
kernel: update 4.1 to 4.1.13
...
- two upstreamed patches removed
- compile tested all targets using 4.1
- run tested ar71xx
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47694
9 years ago
40a09b93d2
mac80211: install new firmware for ath9k-htc on target
...
For quite some time new firmware for ath9k-htc devices
is available in
http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ath9k_htc/
Moreover ath9k-htc kernel driver expects this new v1.4
firmware to exist in /lib/firmware/ath9k_htc.
What happens currently:
---------------------------->8--------------------------
[ 7.830000] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw
requested
[ 7.840000] usb 1-1: Direct firmware load for
ath9k_htc/htc_9271-1.4.0.fw failed with error -2
[ 7.850000] usb 1-1: Falling back to user helper
[ 7.870000] usbcore: registered new interface driver ath9k_htc
[ 7.880000] firmware ath9k_htc!htc_9271-1.4.0.fw:
firmware_loading_store: map pages failed
[ 7.890000] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[ 8.200000] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size:
50980
[ 8.440000] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33
credits
[ 10.720000] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3
[ 10.740000] ath9k_htc 1-1:1.0: FW RMW support: Off
[ 10.760000] ieee80211 phy0: Atheros AR9271 Rev:1
---------------------------->8--------------------------
And with that patch new firmware is used instead:
---------------------------->8--------------------------
[ 33.920000] usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw
requested
[ 34.230000] usb 1-1: ath9k_htc: Transferred FW:
ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ 34.480000] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33
credits
[ 34.740000] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.4
[ 34.750000] ath9k_htc 1-1:1.0: FW RMW support: On
---------------------------->8--------------------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47693
9 years ago
c4ea02cc69
bcm53xx: switch to ucidef_add_switch_ports()
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47692
9 years ago
e2999a8e5f
mpc85xx: fix up m25p80 device id ( #21286 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47691
9 years ago
46112609d0
lantiq: fix up m25p80 device ids ( #20975 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47690
9 years ago
8af9119ff4
tools: make-ext4fs: explicitely request C collation for sorting
...
Do not rely on the system default collaction when sorting directory entries
but explicitely request "C" collation.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47689
9 years ago
f17be5617a
bcm53xx: update PCIe driver
...
This updates the iProc PCIe driver to the version currently submitted
for kernel 4.5.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47688
9 years ago
0e73da37d5
bcm53xx: update SMP patches
...
Broadcom submitted new SMP patches for this SoC to upstream Linux, add
them to OpenWrt.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47687
9 years ago
c03f264f6d
bcm53xx: activate workarounds for erratas
...
This also deactivates some workaround for erratas only seen in older
CPU cores and L2 cores not used in this SoC.
This partly reverts commit r44947.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47686
9 years ago
1d1c9d56dd
bcm53xx: move patch 132-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch
...
This patch is currently placed directly behind the SMP patches and has
nothing to do with SMP, move it to an other position.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 47685
9 years ago
59dbc9fa4e
netifd: update to the latest version, fixes an issue with moving a wifi iface to a different network
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 47683
9 years ago
db7f2d9531
brcm47xx: add Netgear WN2500RP support
...
We generate V1 image only for now. We lack buttons support for V2.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47682
9 years ago
0c250ad4cc
mpc85xx: fix typo added in r47676
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47681
9 years ago
c977dfbec3
mpc85xx: record board id and model name in /etc/board.json
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47680
9 years ago
73a4e0334c
base-files: uci-defaults-new, config_generate: allow force tagged cpu ports
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47679
9 years ago
60b01f432b
mwlwifi: update to latest revision, fixes a kernel panic
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 47677
9 years ago
b4531995c8
mpc85xx: convert to ucidef_add_switch_ports()
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47676
9 years ago
a826098e2b
base-files: uci-defaults-new: only emit force_link for additional ifaces
...
Only se4t the force_link property for non-lan, non-wan ifaces as it is
unnecessary in the default cases.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47675
9 years ago
fff1a82180
mvebu: switch network and led config defaults to board detection framework
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47674
9 years ago
b64f953cd8
base-files: uci-defaults-new: fix unquoted variables
...
Properly quote variables in ucidef_set_interface_lan() and
ucidef_set_interface_lan(), otherwise interfaces with multiple devices
are not properly written into the configuration.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47673
9 years ago
81f603dfb8
ar71xx: record board id and model name in /etc/board.json
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47672
9 years ago
cfac7289c7
base-files: uci-defaults-new: add board id and name helpers
...
Add ucidef_set_board_id() and ucidef_set_model_name() procedures to store
model information in the board.json file.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47671
9 years ago
06af966094
ramips: remove duplicate patch
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47670
9 years ago
237ee2c7a8
procd: update to latest git HEAD
...
this adds a lot of ujail cleanups
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47669
9 years ago
48c709e86d
mac80211: rt2x00: fix WARN_ON_ONCE() caused by inbalanced set/clear of beacon enable bit
...
Signed-off-by: evaxige <evaxige@qq.com>
SVN-Revision: 47668
9 years ago
82557aee85
ramips: adapt VoCore to new second spi device code
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 47667
9 years ago
Jo-Philipp Wich
Felix Fietkau
Rafał Miłecki
Jonas Gorski
Hauke Mehrtens
Imre Kaloz
John Crispin