ar71xx: set status led for the gl-* boards

Signed-off-by: Wojciech Jowsa <w.jowsa@radytek.com>

target/linux/ar71xx/base-files/etc/board.d/01_leds

@@ -312,19 +312,18 @@ dlan-pro-1200-ac)
 	ucidef_set_led_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0"
 	ucidef_set_led_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
 	;;
-gl-ar150|\
-gl-ar300|\
-gl-ar300m|\
+gl-ar300m)
+	ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
+	;;
 gl-mifi)
-	ucidef_set_led_wlan "wlan" "WLAN" "$board:wlan" "phy0tpt"
-
-	case "$board" in
-	gl-mifi)
-		ucidef_set_led_netdev "wan" "WAN" "$board:wan" "eth0"
-		ucidef_set_led_netdev "lan" "LAN" "$board:lan" "eth1"
-		ucidef_set_led_netdev "3gnet" "3GNET" "$board:net" "3g-wan"
+	ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+	ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
+	ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
+	ucidef_set_led_netdev "3gnet" "3GNET" "$board:green:net" "3g-wan"
 	;;
-	esac
+gl-ar150|\
+gl-ar300)
+	ucidef_set_led_wlan "wlan" "WLAN" "$board:wlan" "phy0tpt"
 	;;
 gl-domino|\
 sc300m|\

target/linux/ar71xx/base-files/etc/diag.sh

@@ -61,7 +61,9 @@ get_status_led() {
 	ap90q|\
 	cpe830|\
 	cpe870|\
-	gl-inet)
+	gl-inet|\
+	gl-mifi|\
+	gl-ar300m)
 		status_led="$board:green:lan"
 		;;
 	ap96)

target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c

@@ -47,23 +47,23 @@
 
 static struct gpio_led gl_ar300m_leds_gpio[] __initdata = {
 	{
-        .name = "gl-ar300m:usb",
+		.name = "gl-ar300m:green:usb",
 		.gpio = GL_AR300M_GPIO_LED_USB,
 		.active_low = 0,
 		.default_state = 1,
 	},
 	{
-        .name = "gl-ar300m:wlan",
+		.name = "gl-ar300m:green:wlan",
 		.gpio = GL_AR300M_GPIO_LED_WLAN,
 		.active_low = 1,
 	},
 	{
-        .name = "gl-ar300m:lan",
+		.name = "gl-ar300m::green:lan",
 		.gpio = GL_AR300M_GPIO_LED_LAN,
 		.active_low = 1,
 	},
 	{
-        .name = "gl-ar300m:system",
+		.name = "gl-ar300m:green:system",
 		.gpio = GL_AR300M_GPIO_LED_SYSTEM,
 		.active_low = 1,
 		.default_state = 1,

target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c

@@ -41,27 +41,27 @@
 
 static struct gpio_led gl_mifi_leds_gpio[] __initdata = {
 	{
-		.name = "gl-mifi:wan",
+		.name = "gl-mifi:greeen:wan",
 		.gpio = GL_MIFI_GPIO_LED_WAN,
 		.active_low = 0,
 	},
 	{
-		.name = "gl-mifi:lan",
+		.name = "gl-mifi:green:lan",
 		.gpio = GL_MIFI_GPIO_LED_LAN,
 		.active_low = 0,
 	},
 	{
-		.name = "gl-mifi:wlan",
+		.name = "gl-mifi:green:wlan",
 		.gpio = GL_MIFI_GPIO_LED_WLAN,
 		.active_low = 0,
 	},
 	{
-		.name = "gl-mifi:net",
+		.name = "gl-mifi:green:net",
 		.gpio = GL_MIFI_GPIO_LED_NET,
 		.active_low = 0,
 	},
 	{
-		.name = "gl-mifi:3gcontrol",
+		.name = "gl-mifi:green:3gcontrol",
 		.gpio = GL_MIFI_GPIO_LED_3GCONTROL,
 		.active_low = 0,
 	}