@ -13,6 +13,7 @@ define Device/Default
KERNEL_LOADADDR := 0x80208000
KERNEL_LOADADDR := 0x80208000
DEVICE_DTS = $$ ( SOC) -$( lastword $( subst _, ,$( 1) ) )
DEVICE_DTS = $$ ( SOC) -$( lastword $( subst _, ,$( 1) ) )
SUPPORTED_DEVICES := $( subst _,$( comma) ,$( 1) )
SUPPORTED_DEVICES := $( subst _,$( comma) ,$( 1) )
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
IMAGE/sysupgrade.bin/squashfs :=
IMAGE/sysupgrade.bin/squashfs :=
e n d e f
e n d e f
@ -46,7 +47,7 @@ define Device/DniImage
$( call Device/FitzImage)
$( call Device/FitzImage)
NETGEAR_BOARD_ID :=
NETGEAR_BOARD_ID :=
NETGEAR_HW_ID :=
NETGEAR_HW_ID :=
IMAGES : = factory.img sysupgrade.bin
IMAGES + = factory.img
IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
append-rootfs | pad-rootfs | append-metadata | check-size
append-rootfs | pad-rootfs | append-metadata | check-size
@ -110,7 +111,6 @@ define Device/8dev_habanero-dvk
IMAGE_SIZE := 30976k
IMAGE_SIZE := 30976k
SOC := qcom-ipq4019
SOC := qcom-ipq4019
DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
e n d e f
e n d e f
TARGET_DEVICES += 8dev_habanero-dvk
TARGET_DEVICES += 8dev_habanero-dvk
@ -151,7 +151,6 @@ define Device/aruba_glenmorangie
DEVICE_VENDOR := Aruba
DEVICE_VENDOR := Aruba
SOC := qcom-ipq4029
SOC := qcom-ipq4029
DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
IMAGES := sysupgrade.bin
e n d e f
e n d e f
d e f i n e D e v i c e / a r u b a _ a p - 3 0 3
d e f i n e D e v i c e / a r u b a _ a p - 3 0 3
@ -178,7 +177,6 @@ define Device/asus_map-ac2200
DEVICE_VENDOR := ASUS
DEVICE_VENDOR := ASUS
DEVICE_MODEL := Lyra ( MAP-AC2200)
DEVICE_MODEL := Lyra ( MAP-AC2200)
SOC := qcom-ipq4019
SOC := qcom-ipq4019
IMAGES := sysupgrade.bin
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
e n d e f
e n d e f
TARGET_DEVICES += asus_map-ac2200
TARGET_DEVICES += asus_map-ac2200
@ -199,7 +197,6 @@ define Device/asus_rt-ac58u
# to add a version... or we are very careful not to add '\0' into that
# to add a version... or we are very careful not to add '\0' into that
# string and call it a day.... Yeah, we do the latter!
# string and call it a day.... Yeah, we do the latter!
UIMAGE_NAME:= $( shell echo -e '\03\01\01\01RT-AC58U' )
UIMAGE_NAME:= $( shell echo -e '\03\01\01\01RT-AC58U' )
IMAGES := sysupgrade.bin
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
kmod-usb-ledtrig-usbport
kmod-usb-ledtrig-usbport
e n d e f
e n d e f
@ -214,7 +211,7 @@ define Device/avm_fritzbox-4040
IMAGE_SIZE := 29056k
IMAGE_SIZE := 29056k
UBOOT_PATH := $( STAGING_DIR_IMAGE) /uboot-fritz4040.bin
UBOOT_PATH := $( STAGING_DIR_IMAGE) /uboot-fritz4040.bin
UBOOT_PARTITION_SIZE := 524288
UBOOT_PARTITION_SIZE := 524288
IMAGES = eva.bin sysupgrade.bin
IMAGES + = eva.bin
IMAGE/eva.bin := append-uboot | pad-to $$ $$ ( UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
IMAGE/eva.bin := append-uboot | pad-to $$ $$ ( UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
DEVICE_PACKAGES := fritz-tffs fritz-caldata
DEVICE_PACKAGES := fritz-tffs fritz-caldata
@ -227,7 +224,6 @@ define Device/avm_fritzbox-7530
DEVICE_MODEL := FRITZ!Box 7530
DEVICE_MODEL := FRITZ!Box 7530
SOC := qcom-ipq4019
SOC := qcom-ipq4019
DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
IMAGES := sysupgrade.bin
e n d e f
e n d e f
TARGET_DEVICES += avm_fritzbox-7530
TARGET_DEVICES += avm_fritzbox-7530
@ -237,7 +233,6 @@ define Device/avm_fritzrepeater-1200
DEVICE_MODEL := FRITZ!Repeater 1200
DEVICE_MODEL := FRITZ!Repeater 1200
SOC := qcom-ipq4019
SOC := qcom-ipq4019
DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
IMAGES := sysupgrade.bin
e n d e f
e n d e f
TARGET_DEVICES += avm_fritzrepeater-1200
TARGET_DEVICES += avm_fritzrepeater-1200
@ -247,7 +242,6 @@ define Device/avm_fritzrepeater-3000
DEVICE_MODEL := FRITZ!Repeater 3000
DEVICE_MODEL := FRITZ!Repeater 3000
SOC := qcom-ipq4019
SOC := qcom-ipq4019
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
IMAGES := sysupgrade.bin
e n d e f
e n d e f
TARGET_DEVICES += avm_fritzrepeater-3000
TARGET_DEVICES += avm_fritzrepeater-3000
@ -304,7 +298,7 @@ define Device/compex_wpj428
BLOCKSIZE := 64k
BLOCKSIZE := 64k
IMAGE_SIZE := 31232k
IMAGE_SIZE := 31232k
KERNEL_SIZE := 4096k
KERNEL_SIZE := 4096k
IMAGES = sysupgrade.bin cpximg-6a04.bin
IMAGES + = cpximg-6a04.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
DEVICE_PACKAGES := kmod-gpio-beeper
DEVICE_PACKAGES := kmod-gpio-beeper
@ -321,7 +315,7 @@ define Device/dlink_dap-2610
WRGG_DEVNAME := /dev/mtdblock/8
WRGG_DEVNAME := /dev/mtdblock/8
WRGG_SIGNATURE := wapac30_dkbs_dap2610
WRGG_SIGNATURE := wapac30_dkbs_dap2610
IMAGE_SIZE := 14080k
IMAGE_SIZE := 14080k
IMAGES : = sysupgrade.bin factory.bin
IMAGES + = factory.bin
# Bootloader expects a special 160 byte header which is added by
# Bootloader expects a special 160 byte header which is added by
# wrgg-image.
# wrgg-image.
# Factory image size must be larger than 6MB, and size in wrgg header must
# Factory image size must be larger than 6MB, and size in wrgg header must
@ -347,7 +341,6 @@ define Device/engenius_eap1300
SOC := qcom-ipq4018
SOC := qcom-ipq4018
KERNEL_SIZE := 5120k
KERNEL_SIZE := 5120k
IMAGE_SIZE := 25344k
IMAGE_SIZE := 25344k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
e n d e f
e n d e f
TARGET_DEVICES += engenius_eap1300
TARGET_DEVICES += engenius_eap1300
@ -371,7 +364,7 @@ define Device/engenius_emd1
DEVICE_DTS_CONFIG := config@4
DEVICE_DTS_CONFIG := config@4
SOC := qcom-ipq4018
SOC := qcom-ipq4018
IMAGE_SIZE := 30720k
IMAGE_SIZE := 30720k
IMAGES : = sysupgrade.bin factory.bin
IMAGES + = factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
e n d e f
e n d e f
@ -385,7 +378,7 @@ define Device/engenius_emr3500
SOC := qcom-ipq4018
SOC := qcom-ipq4018
KERNEL_SIZE := 4096k
KERNEL_SIZE := 4096k
IMAGE_SIZE := 30720k
IMAGE_SIZE := 30720k
IMAGES : = sysupgrade.bin factory.bin
IMAGES + = factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
e n d e f
e n d e f
@ -410,7 +403,7 @@ define Device/engenius_ens620ext
IMAGE_SIZE := 21312k
IMAGE_SIZE := 21312k
KERNEL_SIZE := 5120k
KERNEL_SIZE := 5120k
FILESYSTEMS := squashfs
FILESYSTEMS := squashfs
IMAGES : = sysupgrade.bin factory_30.bin factory_35.bin
IMAGES + = factory_30.bin factory_35.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
IMAGE/factory_30.bin := append-kernel | pad-to $$ $$ ( KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$ $$ ( PRODUCT_ID) $$ $$ ( FW_VER)
IMAGE/factory_30.bin := append-kernel | pad-to $$ $$ ( KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$ $$ ( PRODUCT_ID) $$ $$ ( FW_VER)
IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$ $$ ( PRODUCT_ID_NEW) $$ $$ ( FW_VER_NEW)
IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$ $$ ( PRODUCT_ID_NEW) $$ $$ ( FW_VER_NEW)
@ -425,7 +418,6 @@ define Device/ezviz_cs-w3-wd1200g-eup
DEVICE_DTS_CONFIG := config@4
DEVICE_DTS_CONFIG := config@4
IMAGE_SIZE := 14848k
IMAGE_SIZE := 14848k
SOC := qcom-ipq4018
SOC := qcom-ipq4018
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
append-metadata
append-metadata
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
@ -441,7 +433,6 @@ define Device/glinet_gl-b1300
SOC := qcom-ipq4029
SOC := qcom-ipq4029
KERNEL_SIZE := 4096k
KERNEL_SIZE := 4096k
IMAGE_SIZE := 26624k
IMAGE_SIZE := 26624k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
e n d e f
e n d e f
TARGET_DEVICES += glinet_gl-b1300
TARGET_DEVICES += glinet_gl-b1300
@ -477,7 +468,7 @@ define Device/linksys_ea6350v3
KERNEL_SIZE := 3072k
KERNEL_SIZE := 3072k
IMAGE_SIZE := 37888k
IMAGE_SIZE := 37888k
UBINIZE_OPTS := -E 5
UBINIZE_OPTS := -E 5
IMAGES : = factory.bin sysupgrade.bin
IMAGES + = factory.bin
IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$ $$ ( KERNEL_SIZE) | append-ubi | linksys-image type = EA6350v3
IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$ $$ ( KERNEL_SIZE) | append-ubi | linksys-image type = EA6350v3
DEVICE_PACKAGES := uboot-envtools
DEVICE_PACKAGES := uboot-envtools
e n d e f
e n d e f
@ -493,7 +484,7 @@ define Device/linksys_ea8300
BLOCKSIZE := 128k
BLOCKSIZE := 128k
PAGESIZE := 2048
PAGESIZE := 2048
UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
IMAGES : = sysupgrade.bin factory.bin
IMAGES + = factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$ $$ ( KERNEL_SIZE) | append-ubi | linksys-image type = EA8300
IMAGE/factory.bin := append-kernel | pad-to $$ $$ ( KERNEL_SIZE) | append-ubi | linksys-image type = EA8300
DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
e n d e f
e n d e f
@ -506,7 +497,6 @@ define Device/meraki_mr33
SOC := qcom-ipq4029
SOC := qcom-ipq4029
BLOCKSIZE := 128k
BLOCKSIZE := 128k
PAGESIZE := 2048
PAGESIZE := 2048
IMAGES = sysupgrade.bin
DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
e n d e f
e n d e f
TARGET_DEVICES += meraki_mr33
TARGET_DEVICES += meraki_mr33
@ -557,7 +547,7 @@ define Device/openmesh_a42
BLOCKSIZE := 64k
BLOCKSIZE := 64k
KERNEL = kernel-bin | lzma | fit lzma $$ ( DTS_DIR) /$$ ( DEVICE_DTS) .dtb | pad-to $$ ( BLOCKSIZE)
KERNEL = kernel-bin | lzma | fit lzma $$ ( DTS_DIR) /$$ ( DEVICE_DTS) .dtb | pad-to $$ ( BLOCKSIZE)
IMAGE_SIZE := 15616k
IMAGE_SIZE := 15616k
IMAGES = factory.bin sysupgrade.bin
IMAGES + = factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type = A42
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type = A42
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs = $$ $$ @ | append-metadata
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs = $$ $$ @ | append-metadata
DEVICE_PACKAGES := uboot-envtools
DEVICE_PACKAGES := uboot-envtools
@ -573,7 +563,7 @@ define Device/openmesh_a62
BLOCKSIZE := 64k
BLOCKSIZE := 64k
KERNEL = kernel-bin | lzma | fit lzma $$ ( DTS_DIR) /$$ ( DEVICE_DTS) .dtb | pad-to $$ ( BLOCKSIZE)
KERNEL = kernel-bin | lzma | fit lzma $$ ( DTS_DIR) /$$ ( DEVICE_DTS) .dtb | pad-to $$ ( BLOCKSIZE)
IMAGE_SIZE := 15552k
IMAGE_SIZE := 15552k
IMAGES = factory.bin sysupgrade.bin
IMAGES + = factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type = A62
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type = A62
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs = $$ $$ @ | append-metadata
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs = $$ $$ @ | append-metadata
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
@ -592,7 +582,6 @@ define Device/qcom_ap-dk01.1-c1
KERNEL_SIZE := 4096k
KERNEL_SIZE := 4096k
IMAGE_SIZE := 26624k
IMAGE_SIZE := 26624k
$( call Device/FitImage)
$( call Device/FitImage)
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | pad-to $$ $$ ( KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
IMAGE/sysupgrade.bin := append-kernel | pad-to $$ $$ ( KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
e n d e f
e n d e f
TARGET_DEVICES += qcom_ap-dk01.1-c1
TARGET_DEVICES += qcom_ap-dk01.1-c1
@ -622,7 +611,6 @@ define Device/qxwlan_e2600ac-c1
SOC := qcom-ipq4019
SOC := qcom-ipq4019
KERNEL_SIZE := 4096k
KERNEL_SIZE := 4096k
IMAGE_SIZE := 31232k
IMAGE_SIZE := 31232k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
e n d e f
e n d e f
@ -651,7 +639,6 @@ define Device/unielec_u4019-32m
SOC := qcom-ipq4019
SOC := qcom-ipq4019
KERNEL_SIZE := 4096k
KERNEL_SIZE := 4096k
IMAGE_SIZE := 31232k
IMAGE_SIZE := 31232k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
e n d e f
e n d e f
TARGET_DEVICES += unielec_u4019-32m
TARGET_DEVICES += unielec_u4019-32m
@ -667,7 +654,7 @@ define Device/zyxel_nbg6617
RAS_ROOTFS_SIZE := 19840k
RAS_ROOTFS_SIZE := 19840k
RAS_VERSION := " $( VERSION_DIST) $( REVISION) "
RAS_VERSION := " $( VERSION_DIST) $( REVISION) "
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGES : = sysupgrade.bin factory.bin
IMAGES + = factory.bin
# The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
# The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
# at least as large as the one of the initial firmware image (not the current
# at least as large as the one of the initial firmware image (not the current
# one on the device). This only applies to the Web-UI, the bootlaoder ignores
# one on the device). This only applies to the Web-UI, the bootlaoder ignores
@ -685,7 +672,6 @@ define Device/zyxel_wre6606
DEVICE_DTS_CONFIG := config@4
DEVICE_DTS_CONFIG := config@4
SOC := qcom-ipq4018
SOC := qcom-ipq4018
IMAGE_SIZE := 13184k
IMAGE_SIZE := 13184k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
e n d e f
e n d e f