ramips: replace remaining instances of ralink, port-map

Some boards were apparently forgotten when ralink,portmap was renamed
to mediatek,portmap -- probably because they used the long obsolete
ralink,port-map attribute.
If this commit breaks ethernet wan/lan assignment, this is because
the port-map attribute wasn't actually parsed, you'll have to replace
"wllll" by "llllw" in the dts file belonging to that board (and send
a patch doing that!)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

target/linux/ramips/dts/D240.dts

@@ -136,7 +136,7 @@
 
 &ethernet {
 	mtd-mac-address = <&factory 0x4>;
-	ralink,port-map = "wllll";
+	mediatek,portmap = "wllll";
 };
 
 &wmac {

target/linux/ramips/dts/GL-MT300A.dts

@@ -133,7 +133,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&ephy_pins>;
 	mtd-mac-address = <&factory 0x4000>;
-	ralink,port-map = "wllll";
+	mediatek,portmap = "wllll";
 };
 
 &wmac {

target/linux/ramips/dts/GL-MT300N.dts

@@ -122,7 +122,7 @@
 
 &ethernet {
 	mtd-mac-address = <&factory 0x4000>;
-	ralink,port-map = "wllll";
+	mediatek,portmap = "wllll";
 };
 
 &wmac {

target/linux/ramips/dts/GL-MT750.dts

@@ -128,7 +128,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&ephy_pins>;
 	mtd-mac-address = <&factory 0x4000>;
-	ralink,port-map = "llllw";
+	mediatek,portmap = "llllw";
 };
 
 &wmac {

target/linux/ramips/dts/MAC1200RV2.dts

@@ -72,7 +72,7 @@
 &ethernet {
 	pinctrl-names = "default";
 	mtd-mac-address = <&factory 0xd>;
-	ralink,port-map = "llllw";
+	mediatek,portmap = "llllw";
 };
 
 &wmac {

target/linux/ramips/dts/NBG-419N2.dts

@@ -102,7 +102,7 @@
 };
 
 &esw {
-	ralink,portmap = <0x2f>;
+	mediatek,portmap = <0x2f>;
 };
 
 &wmac {

target/linux/ramips/dts/WL-WN575A3.dts

@@ -125,5 +125,5 @@
 
 &ethernet {
 	mtd-mac-address = <&factory 0x2e>;
-	ralink,port-map = "llllw";
+	mediatek,portmap = "llllw";
 };

target/linux/ramips/dts/WRTNODE2.dtsi

@@ -75,7 +75,7 @@
 
 &ethernet {
 	mtd-mac-address = <&factory 0x4>;
-	ralink,port-map = "llllw";
+	mediatek,portmap = "llllw";
 };
 
 &sdhci {

target/linux/ramips/dts/ZBT-WE826.dts

@@ -102,7 +102,7 @@
 
 &ethernet {
 	mtd-mac-address = <&factory 0x4>;
-	ralink,port-map = "wllll";
+	mediatek,portmap = "wllll";
 };
 
 &wmac {

target/linux/ramips/dts/kn_rc.dts

@@ -115,7 +115,7 @@
 
 &ethernet {
 	mtd-mac-address = <&factory 0x4>;
-	ralink,port-map = "wllll";
+	mediatek,portmap = "wllll";
 };
 
 &wmac {

target/linux/ramips/dts/kn_rf.dts

@@ -115,7 +115,7 @@
 
 &ethernet {
 	mtd-mac-address = <&factory 0x4>;
-	ralink,port-map = "wllll";
+	mediatek,portmap = "wllll";
 };
 
 &wmac {