ath79: add support for TP-Link CPE510-v2/v3
TP-Link CPE510-v2/v3 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - Based on the same underlying hardware as the TP-Link CPE510 - Power, LAN, and 4 green LEDs - 1 10/100Mbps Shielded Ethernet Port (Passive PoE in) - Built-in 13dBi 2x2 dual-polarized directional MIMO antenna - Adjustable transmission power from 0 to 23dBm/200mw Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net> [whitespace fixes] Signed-off-by: Petr Štetiar <ynezz@true.cz>master
parent
8e384ba830
commit
cad4132e00
@ -0,0 +1,9 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
#include "ar9344_tplink_cpe510.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
compatible = "tplink,cpe510-v2", "qca,ar9344";
|
||||||
|
model = "TP-Link CPE510 v2";
|
||||||
|
};
|
@ -0,0 +1,9 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
#include "ar9344_tplink_cpe510.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
compatible = "tplink,cpe510-v3", "qca,ar9344";
|
||||||
|
model = "TP-Link CPE510 v3";
|
||||||
|
};
|
@ -0,0 +1,152 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||||
|
/dts-v1/;
|
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/input/input.h>
|
||||||
|
|
||||||
|
#include "ar9344.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
aliases {
|
||||||
|
led-boot = &system;
|
||||||
|
led-failsafe = &system;
|
||||||
|
led-running = &system;
|
||||||
|
led-upgrade = &system;
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
lan {
|
||||||
|
label = "tp-link:green:lan";
|
||||||
|
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
|
||||||
|
link1 {
|
||||||
|
label = "tp-link:green:link1";
|
||||||
|
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
|
||||||
|
link2 {
|
||||||
|
label = "tp-link:green:link2";
|
||||||
|
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
|
||||||
|
link3 {
|
||||||
|
label = "tp-link:green:link3";
|
||||||
|
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
|
||||||
|
system: link4 {
|
||||||
|
label = "tp-link:green:link4";
|
||||||
|
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
keys {
|
||||||
|
compatible = "gpio-keys";
|
||||||
|
|
||||||
|
reset {
|
||||||
|
linux,code = <KEY_RESTART>;
|
||||||
|
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||||
|
debounce-interval = <60>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
&ref {
|
||||||
|
clock-frequency = <40000000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&spi {
|
||||||
|
num-cs = <1>;
|
||||||
|
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
flash@0 {
|
||||||
|
compatible = "jedec,spi-nor";
|
||||||
|
reg = <0>;
|
||||||
|
spi-max-frequency = <25000000>;
|
||||||
|
|
||||||
|
partitions {
|
||||||
|
compatible = "fixed-partitions";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
uboot: partition@0 {
|
||||||
|
label = "u-boot";
|
||||||
|
reg = <0x000000 0x020000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@20000 {
|
||||||
|
label = "partition-table";
|
||||||
|
reg = <0x020000 0x010000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
info: partition@30000 {
|
||||||
|
label = "info";
|
||||||
|
reg = <0x030000 0x010000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@40000 {
|
||||||
|
label = "firmware";
|
||||||
|
reg = <0x040000 0x780000>;
|
||||||
|
|
||||||
|
compatible = "fixed-partitions";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
partition@0 {
|
||||||
|
label = "kernel";
|
||||||
|
reg = <0x000000 0x200000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@200000 {
|
||||||
|
label = "rootfs";
|
||||||
|
reg = <0x200000 0x580000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@7c0000 {
|
||||||
|
label = "config";
|
||||||
|
reg = <0x7c0000 0x030000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
|
||||||
|
art: partition@7f0000 {
|
||||||
|
label = "art";
|
||||||
|
reg = <0x7f0000 0x010000>;
|
||||||
|
read-only;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&wmac {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
mtd-cal-data = <&art 0x1000>;
|
||||||
|
mtd-mac-address = <&info 0x08>;
|
||||||
|
};
|
||||||
|
|
||||||
|
ð0 {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
mtd-mac-address = <&info 0x08>;
|
||||||
|
|
||||||
|
phy-mode = "mii";
|
||||||
|
phy-handle = <&swphy4>;
|
||||||
|
};
|
||||||
|
|
||||||
|
ð1 {
|
||||||
|
status = "okay";
|
||||||
|
compatible = "syscon", "simple-mfd";
|
||||||
|
};
|
Loading…
Reference in New Issue