dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ramips: fix whitespace and comment issues in dts

Browse Source 
Fix space vs. tabs issue and trainling whitespaces. Use C style
comments or drop the comments if they explain what is already to see in
the devicetree parameters.

Signed-off-by: Mathias Kresin <dev@kresin.me>
v19.07.3_mercusys_ac12_duma
Mathias Kresin 6 years ago
parent 53624c1702
commit bfd65fc4ab
28 changed files with 82 additions and 86 deletions
Show Stats Download Patch File Download Diff File

5
target/linux/ramips/dts/11ACNAS.dts
Unescape Escape View File

@ -14,11 +14,6 @@
gpio-leds {
compatible = "gpio-leds";
// Only USB LED is connected to GPIO.
// All of other LEDs are connected directly to
// switch, WiFi chip, Vcc, so they are not controllable
// via GPIO
usb {
label = "11acnas:green:usb";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;

8
target/linux/ramips/dts/BR-6475ND.dts
Unescape Escape View File

@ -94,9 +94,11 @@
realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
};
/* Unclear if this is the correct gpio setup; the USB ports are
unpopulated on a stock BR-6475nD, even though the hardware exists
and the headers are there. */
/*
* Unclear if this is the correct gpio setup; the USB ports are
* unpopulated on a stock BR-6475nD, even though the hardware exists
* and the headers are there.
*/
/*
gpio_export {
compatible = "gpio-export";

16
target/linux/ramips/dts/FREESTATION5.dts
Unescape Escape View File

@ -48,20 +48,24 @@
gpio-export {
compatible = "gpio-export";
// Used to enable power-over-ethernet passthrough from port0 to port1.
// Disable passthrough by default to prevent accidental equipment damage.
/*
* Used to enable power-over-ethernet passthrough from port0 to port1.
* Disable passthrough by default to prevent accidental equipment damage.
*/
poe {
gpio-export,name = "poe-passthrough";
gpio-export,output = <1>; // OUT_INIT_HIGH
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; // GPIO 11, ACTIVE_LOW
gpio-export,output = <1>;
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
};
gpio-leds {
compatible = "gpio-leds";
// The following leds are defined in the ArcOS firmware, but reportedly
// not present in the Freestation5 device.
/*
* The following leds are defined in the ArcOS firmware, but reportedly
* not present in the Freestation5 device.
*/
wifi {
label = "freestation5:unknown:wifi";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;

1
target/linux/ramips/dts/RB750Gr3.dts
Unescape Escape View File

@ -104,7 +104,6 @@
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};

1
target/linux/ramips/dts/RBM33G.dts
Unescape Escape View File

@ -113,7 +113,6 @@
reg = <0xf000 0x71000>;
read-only;
};
};
w25q128@1 {

1
target/linux/ramips/dts/SK-WB8.dts
Unescape Escape View File

@ -83,7 +83,6 @@
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};

10
target/linux/ramips/dts/UBNT-ER-e50.dtsi
Unescape Escape View File

@ -77,10 +77,12 @@
};
&spi0 {
/* This board has 2Mb spi flash soldered in and visible
from manufacturer's firmware.
But this SoC shares spi and nand pins,
and current driver does't handle this sharing well */
/*
* This board has 2Mb spi flash soldered in and visible
* from manufacturer's firmware.
* But this SoC shares spi and nand pins,
* and current driver doesn't handle this sharing well
*/
status = "disabled";
m25p80@0 {

5
target/linux/ramips/dts/W2914NSV2.dts
Unescape Escape View File

@ -13,11 +13,6 @@
gpio-leds {
compatible = "gpio-leds";
// Only USB LED is connected to GPIO.
// All of other LEDs are connected directly to
// switch, WiFi chip, Vcc, so they are not controllable
// via GPIO
usb {
label = "w2914nsv2:green:usb";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;

6
target/linux/ramips/dts/WRC-1167GHBK2-S.dts
Unescape Escape View File

@ -137,8 +137,10 @@
&pcie {
status = "okay";
// WRC-1167GHBK2-S has MT7615D for 2.4/5 GHz wifi,
// but it's not supported in OpenWrt.
/*
* WRC-1167GHBK2-S has MT7615D for 2.4/5 GHz wifi,
* but it's not supported in OpenWrt.
*/
};
&xhci {

3
target/linux/ramips/dts/WRC-2533GST.dts
Unescape Escape View File

@ -167,8 +167,7 @@
&pcie {
status = "okay";
// WRC-2533GST has MT7615 for 2.4/5 GHz wifi,
// but it's not supported in OpenWrt.
/* WRC-2533GST has MT7615 for 2.4/5 GHz wifi, but it's not supported */
};
&xhci {

6
target/linux/ramips/dts/Y1S.dts
Unescape Escape View File

@ -13,11 +13,11 @@
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
/* GPIO 54、55、56 USB1、2、3 */
usb0 {
gpio-export,name = "usb0";
gpio-export,output = <1>; // GPIOF_OUT_INIT_HIGH
gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>; // GPIO2:40+14=GPIO 54
gpio-export,output = <1>;
gpios = <&gpio2 14 GPIO_ACTIVE_HIGH>;
};
usb1 {
gpio-export,name = "usb1";

Write Preview
Loading…
Cancel
Save