@ -920,64 +920,41 @@
reg = <0x01200600 0x100>;
};
hs_phy_1: phy@100f880 0 {
hs_phy_0: hs_phy_ 0 {
compatible = "qcom,dwc3-hs-usb-phy";
reg = <0x100f8800 0x30>;
clocks = <&gcc USB30_1_UTMI_CLK>;
clock-names = "ref";
#phy-cells = <0>;
status = "disabled";
};
ss_phy_1: phy@100f8830 {
compatible = "qcom,dwc3-ss-usb-phy";
reg = <0x100f8830 0x30>;
clocks = <&gcc USB30_1_MASTER_CLK>;
clock-names = "ref";
#phy-cells = <0>;
status = "disabled";
};
hs_phy_0: phy@110f8800 {
compatible = "qcom,dwc3-hs-usb-phy";
reg = <0x110f8800 0x30>;
regmap = <&usb3_0>;
clocks = <&gcc USB30_0_UTMI_CLK>;
clock-names = "ref";
#phy-cells = <0>;
status = "disabled";
};
ss_phy_0: phy@110f883 0 {
ss_phy_0: ss_phy_0 {
compatible = "qcom,dwc3-ss-usb-phy";
reg = <0x110f8830 0x3 0>;
regmap = <&usb3_0>;
clocks = <&gcc USB30_0_MASTER_CLK>;
clock-names = "ref";
#phy-cells = <0>;
status = "disabled";
};
usb3_0: usb30 @0 {
compatible = "qcom,dwc3";
usb3_0: usb3@110f8800 {
compatible = "qcom,dwc3", "syscon";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x110f8800 0x8000>;
clocks = <&gcc USB30_0_MASTER_CLK>;
clock-names = "core";
ranges;
resets = <&gcc USB30_0_MASTER_RESET>;
reset-names = "usb30_0_ mstr_rst ";
reset-names = "ma ste r";
status = "disabled";
dwc3_0: dwc3@11000000 {
compatible = "snps,dwc3";
reg = <0x11000000 0xcd00>;
interrupts = <0 110 0x4 >;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH >;
phys = <&hs_phy_0>, <&ss_phy_0>;
phy-names = "usb2-phy", "usb3-phy";
dr_mode = "host";
@ -985,24 +962,41 @@
};
};
usb3_1: usb30@1 {
compatible = "qcom,dwc3";
hs_phy_1: hs_phy_1 {
compatible = "qcom,dwc3-hs-usb-phy";
regmap = <&usb3_1>;
clocks = <&gcc USB30_1_UTMI_CLK>;
clock-names = "ref";
#phy-cells = <0>;
};
ss_phy_1: ss_phy_1 {
compatible = "qcom,dwc3-ss-usb-phy";
regmap = <&usb3_1>;
clocks = <&gcc USB30_1_MASTER_CLK>;
clock-names = "ref";
#phy-cells = <0>;
};
usb3_1: usb3@100f8800 {
compatible = "qcom,dwc3", "syscon";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x100f8800 0x8000>;
clocks = <&gcc USB30_1_MASTER_CLK>;
clock-names = "core";
ranges;
resets = <&gcc USB30_1_MASTER_RESET>;
reset-names = "usb30_1_mstr_rst";
reset-names = "ma ste r";
status = "disabled";
dwc3_1: dwc3@10000000 {
compatible = "snps,dwc3";
reg = <0x10000000 0xcd00>;
interrupts = <0 205 0x4>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH >;
phys = <&hs_phy_1>, <&ss_phy_1>;
phy-names = "usb2-phy", "usb3-phy";
dr_mode = "host";