Update to compat-wireless-2009-03-31

SVN-Revision: 15083
v19.07.3_mercusys_ac12_duma
Hauke Mehrtens 15 years ago
parent 11a791a318
commit a4891ea4d6

@ -17,12 +17,12 @@ ifneq ($(CONFIG_LINUX_2_6_21)$(CONFIG_LINUX_2_6_23)$(CONFIG_LINUX_2_6_24)$(CONFI
PKG_MD5SUM:=9563ceeed86bca0859ad5f010623277c PKG_MD5SUM:=9563ceeed86bca0859ad5f010623277c
PATCH_DIR:=./patches-old PATCH_DIR:=./patches-old
else else
PKG_VERSION:=2009-03-24 PKG_VERSION:=2009-03-31
PKG_RELEASE:=1 PKG_RELEASE:=1
PKG_SOURCE_URL:= \ PKG_SOURCE_URL:= \
http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/03 \ http://www.orbit-lab.org/kernel/compat-wireless-2.6/2009/03 \
http://wireless.kernel.org/download/compat-wireless-2.6 http://wireless.kernel.org/download/compat-wireless-2.6
PKG_MD5SUM:=9e0574d123b6d6827c56a7c0042173fb PKG_MD5SUM:=b5b2159081c36dd6c318a28eddf7e646
endif endif
PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2 PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2

@ -163,7 +163,7 @@
# USB Drivers # USB Drivers
ifneq ($(CONFIG_USB),) ifneq ($(CONFIG_USB),)
@@ -249,22 +249,22 @@ CONFIG_ZD1211RW=m @@ -249,21 +249,21 @@ CONFIG_ZD1211RW=m
# is only wireless RNDIS chip known to date. # is only wireless RNDIS chip known to date.
# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
# it also requires new RNDIS_HOST and CDC_ETHER modules which we add # it also requires new RNDIS_HOST and CDC_ETHER modules which we add
@ -182,19 +182,17 @@
-CONFIG_AT76C50X_USB=m -CONFIG_AT76C50X_USB=m
+# CONFIG_AT76C50X_USB=m +# CONFIG_AT76C50X_USB=m
# Activate AR9170 support only on kernel >= 2.6.28. # Activate AR9170 support only on kernel >= 2.6.29.
# The needed USB poison feature was added in this kernel release. # The needed USB poison feature was added in this kernel release.
ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 28 && echo yes),yes) ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 29 && echo yes),yes)
-CONFIG_AR9170_COMMON=m
-CONFIG_AR9170_USB=m -CONFIG_AR9170_USB=m
-CONFIG_AR9170_LEDS=y -CONFIG_AR9170_LEDS=y
+# CONFIG_AR9170_COMMON=m
+# CONFIG_AR9170_USB=m +# CONFIG_AR9170_USB=m
+# CONFIG_AR9170_LEDS=y +# CONFIG_AR9170_LEDS=y
endif endif
# RT2500USB does not require firmware # RT2500USB does not require firmware
@@ -302,20 +302,20 @@ CONFIG_P54_COMMON=m @@ -301,20 +301,20 @@ CONFIG_P54_COMMON=m
# Sonics Silicon Backplane # Sonics Silicon Backplane

@ -1,7 +1,7 @@
From 313314263fda19db8eed94a7d7259b595634212e Mon Sep 17 00:00:00 2001 From 9ed8a41a30916a79529552872e8d1a6175d37398 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com> From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sat, 14 Mar 2009 20:02:51 +0100 Date: Sat, 28 Mar 2009 20:30:14 +0100
Subject: [PATCH] rt2x00: Move Move pci_dev specific access to rt2x00pci Subject: [PATCH 1/9] rt2x00: Move Move pci_dev specific access to rt2x00pci
pci_dev->irq and pci_name(pci_dev) access should be limited pci_dev->irq and pci_name(pci_dev) access should be limited
to rt2x00pci only. This is more generic and allows a rt2x00 pci to rt2x00pci only. This is more generic and allows a rt2x00 pci
@ -16,7 +16,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
drivers/net/wireless/rt2x00/rt2x00.h | 18 ++++++++++++++++++ drivers/net/wireless/rt2x00/rt2x00.h | 18 ++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00pci.c | 16 ++++++++++++---- drivers/net/wireless/rt2x00/rt2x00pci.c | 16 ++++++++++++----
drivers/net/wireless/rt2x00/rt61pci.c | 7 +------ drivers/net/wireless/rt2x00/rt61pci.c | 7 +------
5 files changed, 33 insertions(+), 12 deletions(-) drivers/net/wireless/rt2x00/rt61pci.h | 6 ------
6 files changed, 33 insertions(+), 18 deletions(-)
--- a/drivers/net/wireless/rt2x00/rt2400pci.c --- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@ -148,3 +149,18 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
if (!rt2x00_rf(&rt2x00dev->chip, RF5225) && if (!rt2x00_rf(&rt2x00dev->chip, RF5225) &&
!rt2x00_rf(&rt2x00dev->chip, RF5325) && !rt2x00_rf(&rt2x00dev->chip, RF5325) &&
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -63,12 +63,6 @@
*/
/*
- * PCI Configuration Header
- */
-#define PCI_CONFIG_HEADER_VENDOR 0x0000
-#define PCI_CONFIG_HEADER_DEVICE 0x0002
-
-/*
* HOST_CMD_CSR: For HOST to interrupt embedded processor
*/
#define HOST_CMD_CSR 0x0008

@ -0,0 +1,25 @@
From 0a807e9fbd915d2c0cc30870403a571478a9191b Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sat, 28 Mar 2009 20:31:25 +0100
Subject: [PATCH 2/9] rt2x00: Fix Sparse warning
rt2x00link_reset_qual() is not declared in a header,
and is only internally used within rt2x00link.c.
It should be declared as static.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00link.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -387,7 +387,7 @@ void rt2x00link_reset_tuner(struct rt2x0
rt2x00link_antenna_reset(rt2x00dev);
}
-void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev)
+static void rt2x00link_reset_qual(struct rt2x00_dev *rt2x00dev)
{
struct link_qual *qual = &rt2x00dev->link.qual;

@ -0,0 +1,95 @@
From 76b0fa91af8ca33cd68f52f2d02a05c488777f58 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sat, 28 Mar 2009 20:32:07 +0100
Subject: [PATCH 3/9] rt2x00: Don't free register information on suspend
After suspend & resume the rt2x00 devices won't wakeup
anymore due to a broken register information setup.
The most important problem is the release of the EEPROM
buffer which is completely cleared and never read again
after the suspend.
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00pci.c | 18 +-----------------
drivers/net/wireless/rt2x00/rt2x00usb.c | 18 +-----------------
2 files changed, 2 insertions(+), 34 deletions(-)
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -377,8 +377,6 @@ int rt2x00pci_suspend(struct pci_dev *pc
if (retval)
return retval;
- rt2x00pci_free_reg(rt2x00dev);
-
pci_save_state(pci_dev);
pci_disable_device(pci_dev);
return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
@@ -389,7 +387,6 @@ int rt2x00pci_resume(struct pci_dev *pci
{
struct ieee80211_hw *hw = pci_get_drvdata(pci_dev);
struct rt2x00_dev *rt2x00dev = hw->priv;
- int retval;
if (pci_set_power_state(pci_dev, PCI_D0) ||
pci_enable_device(pci_dev) ||
@@ -398,20 +395,7 @@ int rt2x00pci_resume(struct pci_dev *pci
return -EIO;
}
- retval = rt2x00pci_alloc_reg(rt2x00dev);
- if (retval)
- return retval;
-
- retval = rt2x00lib_resume(rt2x00dev);
- if (retval)
- goto exit_free_reg;
-
- return 0;
-
-exit_free_reg:
- rt2x00pci_free_reg(rt2x00dev);
-
- return retval;
+ return rt2x00lib_resume(rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00pci_resume);
#endif /* CONFIG_PM */
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -702,8 +702,6 @@ int rt2x00usb_suspend(struct usb_interfa
if (retval)
return retval;
- rt2x00usb_free_reg(rt2x00dev);
-
/*
* Decrease usbdev refcount.
*/
@@ -717,24 +715,10 @@ int rt2x00usb_resume(struct usb_interfac
{
struct ieee80211_hw *hw = usb_get_intfdata(usb_intf);
struct rt2x00_dev *rt2x00dev = hw->priv;
- int retval;
usb_get_dev(interface_to_usbdev(usb_intf));
- retval = rt2x00usb_alloc_reg(rt2x00dev);
- if (retval)
- return retval;
-
- retval = rt2x00lib_resume(rt2x00dev);
- if (retval)
- goto exit_free_reg;
-
- return 0;
-
-exit_free_reg:
- rt2x00usb_free_reg(rt2x00dev);
-
- return retval;
+ return rt2x00lib_resume(rt2x00dev);
}
EXPORT_SYMBOL_GPL(rt2x00usb_resume);
#endif /* CONFIG_PM */

@ -0,0 +1,21 @@
From b587a44d6cf038cac3ce194c49196f501fa4bb48 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sat, 28 Mar 2009 20:32:50 +0100
Subject: [PATCH 4/9] rt2x00: Add rt73usb USB IDs
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt73usb.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2369,6 +2369,8 @@ static struct usb_device_id rt73usb_devi
/* Buffalo */
{ USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) },
+ { USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) },
/* CNet */
{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },

@ -1,7 +1,7 @@
From 827327792c4b0d4d4909ec27bd56cb3ba8f2b754 Mon Sep 17 00:00:00 2001 From 0f4396e5a4351ccd48256407b4a606d6c33a94cb Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com> From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sat, 14 Mar 2009 20:06:48 +0100 Date: Sat, 28 Mar 2009 20:37:26 +0100
Subject: [PATCH] rt2x00: Implement support for 802.11n Subject: [PATCH 5/9] rt2x00: Implement support for 802.11n
Extend rt2x00lib capabilities to support 802.11n, Extend rt2x00lib capabilities to support 802.11n,
it still lacks aggregation support, but that can it still lacks aggregation support, but that can

@ -1,25 +0,0 @@
From 6bdf6a86854bdeab9557f0ce25c3f5401c18f629 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sat, 14 Mar 2009 20:57:27 +0100
Subject: [PATCH] rt2x00: rt2x00: Move Move pci_dev specific access to rt2x00pci - part 2
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt61pci.h | 6 ------
1 files changed, 0 insertions(+), 6 deletions(-)
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -63,12 +63,6 @@
*/
/*
- * PCI Configuration Header
- */
-#define PCI_CONFIG_HEADER_VENDOR 0x0000
-#define PCI_CONFIG_HEADER_DEVICE 0x0002
-
-/*
* HOST_CMD_CSR: For HOST to interrupt embedded processor
*/
#define HOST_CMD_CSR 0x0008

@ -0,0 +1,247 @@
From 18b2be31a35dc8bd216e60e3c9d8d8e7b2179aed Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sat, 28 Mar 2009 20:38:40 +0100
Subject: [PATCH 6/9] rt2x00: Add rt2x00soc bus module
Add new library module for SoC drivers.
This is needed to fully support the platform
driver part of rt2800pci.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/Kconfig | 4 +
drivers/net/wireless/rt2x00/Makefile | 1 +
drivers/net/wireless/rt2x00/rt2x00soc.c | 159 +++++++++++++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00soc.h | 52 ++++++++++
4 files changed, 216 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/rt2x00soc.c
create mode 100644 drivers/net/wireless/rt2x00/rt2x00soc.h
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -12,6 +12,7 @@ rt2x00lib-$(CONFIG_RT2X00_LIB_HT) += rt2
obj-$(CONFIG_RT2X00_LIB) += rt2x00lib.o
obj-$(CONFIG_RT2X00_LIB_PCI) += rt2x00pci.o
+obj-$(CONFIG_RT2X00_LIB_SOC) += rt2x00soc.o
obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o
obj-$(CONFIG_RT2400PCI) += rt2400pci.o
obj-$(CONFIG_RT2500PCI) += rt2500pci.o
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
@@ -0,0 +1,159 @@
+/*
+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2x00soc
+ Abstract: rt2x00 generic soc device routines.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "rt2x00.h"
+#include "rt2x00soc.h"
+
+static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev)
+{
+ kfree(rt2x00dev->rf);
+ rt2x00dev->rf = NULL;
+
+ kfree(rt2x00dev->eeprom);
+ rt2x00dev->eeprom = NULL;
+}
+
+static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
+{
+ struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ rt2x00dev->csr.base = (void __iomem *)KSEG1ADDR(res->start);
+ if (!rt2x00dev->csr.base)
+ goto exit;
+
+ rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
+ if (!rt2x00dev->eeprom)
+ goto exit;
+
+ rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
+ if (!rt2x00dev->rf)
+ goto exit;
+
+ return 0;
+
+exit:
+ ERROR_PROBE("Failed to allocate registers.\n");
+ rt2x00soc_free_reg(rt2x00dev);
+
+ return -ENOMEM;
+}
+
+int rt2x00soc_probe(struct platform_device *pdev,
+ const unsigned short chipset,
+ const struct rt2x00_ops *ops)
+{
+ struct ieee80211_hw *hw;
+ struct rt2x00_dev *rt2x00dev;
+ int retval;
+
+ hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
+ if (!hw) {
+ ERROR_PROBE("Failed to allocate hardware.\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, hw);
+
+ rt2x00dev = hw->priv;
+ rt2x00dev->dev = &pdev->dev;
+ rt2x00dev->ops = ops;
+ rt2x00dev->hw = hw;
+ rt2x00dev->irq = platform_get_irq(pdev, 0);
+ rt2x00dev->name = pdev->dev.driver->name;
+
+ rt2x00_set_chip_rt(rt2x00dev, chipset);
+
+ retval = rt2x00soc_alloc_reg(rt2x00dev);
+ if (retval)
+ goto exit_free_device;
+
+ retval = rt2x00lib_probe_dev(rt2x00dev);
+ if (retval)
+ goto exit_free_reg;
+
+ return 0;
+
+exit_free_reg:
+ rt2x00soc_free_reg(rt2x00dev);
+
+exit_free_device:
+ ieee80211_free_hw(hw);
+
+ return retval;
+}
+
+int rt2x00soc_remove(struct platform_device *pdev)
+{
+ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+
+ /*
+ * Free all allocated data.
+ */
+ rt2x00lib_remove_dev(rt2x00dev);
+ rt2x00soc_free_reg(rt2x00dev);
+ ieee80211_free_hw(hw);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00soc_remove);
+
+#ifdef CONFIG_PM
+int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+
+ return rt2x00lib_suspend(rt2x00dev, state);
+}
+EXPORT_SYMBOL_GPL(rt2x00soc_suspend);
+
+int rt2x00soc_resume(struct platform_device *pdev)
+{
+ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+
+ return rt2x00lib_resume(rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00soc_resume);
+#endif /* CONFIG_PM */
+
+/*
+ * rt2x00soc module information.
+ */
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("rt2x00 soc library");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.h
@@ -0,0 +1,52 @@
+/*
+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2x00soc
+ Abstract: Data structures for the rt2x00soc module.
+ */
+
+#ifndef RT2X00SOC_H
+#define RT2X00SOC_H
+
+#define KSEG1ADDR(__ptr) __ptr
+
+#define __rt2x00soc_probe(__chipset, __ops) \
+static int __rt2x00soc_probe(struct platform_device *pdev) \
+{ \
+ return rt2x00soc_probe(pdev, (__chipset), (__ops)); \
+}
+
+/*
+ * SoC driver handlers.
+ */
+int rt2x00soc_probe(struct platform_device *pdev,
+ const unsigned short chipset,
+ const struct rt2x00_ops *ops);
+int rt2x00soc_remove(struct platform_device *pdev);
+#ifdef CONFIG_PM
+int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state);
+int rt2x00soc_resume(struct platform_device *pdev);
+#else
+#define rt2x00soc_suspend NULL
+#define rt2x00soc_resume NULL
+#endif /* CONFIG_PM */
+
+#endif /* RT2X00SOC_H */

@ -1,25 +0,0 @@
From a3334c89fbed644bb12ee27e2d9c1dc70b1512ab Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sat, 14 Mar 2009 20:58:12 +0100
Subject: [PATCH] rt2x00: rt2x00: Move Move pci_dev specific access to rt2x00pci - part 2 (rt2800pci)
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800pci.h | 6 ------
1 files changed, 0 insertions(+), 6 deletions(-)
--- a/drivers/net/wireless/rt2x00/rt2800pci.h
+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
@@ -83,12 +83,6 @@
*/
/*
- * PCI Configuration Header
- */
-#define PCI_CONFIG_HEADER_VENDOR 0x0000
-#define PCI_CONFIG_HEADER_DEVICE 0x0002
-
-/*
* E2PROM_CSR: EEPROM control register.
* RELOAD: Write 1 to reload eeprom content.
* TYPE: 0: 93c46, 1:93c66.

@ -0,0 +1,25 @@
From 7f759a5e56f64fed24e5eb487003ce455786bc31 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sat, 28 Mar 2009 20:44:18 +0100
Subject: [PATCH 7/9] rt2x00: Add calibration fields to rt2x00dev (rt2x00ht)
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2x00.h | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -782,6 +782,12 @@ struct rt2x00_dev {
u8 freq_offset;
/*
+ * Calibration information (for rt2800usb).
+ */
+ u8 calibration_bw20;
+ u8 calibration_bw40;
+
+ /*
* Low level statistics which will have
* to be kept up to date while device is running.
*/

@ -1,32 +0,0 @@
From 14f870b27b836acee5f04809287175016ca16b05 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sun, 15 Mar 2009 15:13:58 +0100
Subject: [PATCH] rt2x00: Fix module loading in case of error (rt2800pci)
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800pci.c | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -3014,10 +3014,19 @@ static int __init rt2800pci_init(void)
#ifdef CONFIG_RT2800PCI_WISOC
ret = platform_driver_register(&rt2800soc_driver);
+ if (ret)
+ return ret;
#endif
#ifdef CONFIG_RT2800PCI_PCI
ret = pci_register_driver(&rt2800pci_driver);
+ if (ret) {
+#ifdef CONFIG_RT2800PCI_WISOC
+ platform_driver_unregister(&rt2800soc_driver);
+#endif
+ return ret;
+ }
#endif
+
return ret;
}

@ -1,80 +0,0 @@
From aef81259a944186a120d51e4462a5f974de99fb8 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sun, 15 Mar 2009 15:37:29 +0100
Subject: [PATCH] rt2x00: Add PM support for SoC (rt2800pci)
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800pci.c | 52 +++++++++++++++++++++++++++++--
1 files changed, 49 insertions(+), 3 deletions(-)
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -2934,7 +2934,7 @@ exit:
static int rt2800soc_probe(struct platform_device *pdev)
{
- const struct rt2x00_ops *ops = &rt2800pci_ops;
+ struct rt2x00_ops *ops = (struct rt2x00_ops *)pdev->driver->p;
struct ieee80211_hw *hw;
struct rt2x00_dev *rt2x00dev;
int retval;
@@ -2990,10 +2990,56 @@ static int rt2800soc_remove(struct platf
return 0;
}
+#ifdef CONFIG_PM
+int rt2x00soc_suspend(struct device *dev, pm_message_t state)
+{
+ struct ieee80211_hw *hw = dev_get_drvdata(dev);
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ int retval;
+
+ retval = rt2x00lib_suspend(rt2x00dev, state);
+ if (retval)
+ return retval;
+
+ rt2800soc_free_reg(rt2x00dev);
+
+ return 0;
+}
+
+int rt2x00soc_resume(struct device *dev)
+{
+ struct ieee80211_hw *hw = dev_get_drvdata(dev);
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ int retval;
+
+ retval = rt2x00soc_alloc_reg(rt2x00dev);
+ if (retval)
+ return retval;
+
+ retval = rt2x00lib_resume(rt2x00dev);
+ if (retval)
+ goto exit_free_reg;
+
+ return 0;
+
+exit_free_reg:
+ rt2x00pci_free_reg(rt2x00dev);
+
+ return retval;
+}
+#endif /* CONFIG_PM */
+
static struct platform_driver rt2800soc_driver = {
- .driver.name = "rt2800_wmac",
+ .driver = {
+ .name = "rt2800_wmac",
+ .owner = THIS_MODULE,
+ .mod_name = KBUILD_MODNAME,
+ .p = &rt2800pci_ops;
+ }
.probe = rt2800soc_probe,
- .remove = rt2800soc_remove,
+ .remove = __devexit_p(rt2800soc_remove),
+ .suspend = rt2x00soc_suspend,
+ .resume = rt2x00soc_resume,
};
#endif /* CONFIG_RT2800PCI_WISOC */

@ -1,7 +1,7 @@
From a34c288f7214637f214ec17fb2b35dd5d20b0634 Mon Sep 17 00:00:00 2001 From b7dcb460c4c441ce52b3c5ce30d65e1ecfbb30ad Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com> From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sat, 14 Mar 2009 20:41:58 +0100 Date: Sat, 28 Mar 2009 20:46:46 +0100
Subject: [PATCH] rt2x00: Implement support for rt2800pci Subject: [PATCH 8/9] rt2x00: Implement support for rt2800pci
Add support for the rt2800pci chipset. Add support for the rt2800pci chipset.
@ -13,18 +13,18 @@ Signed-off-by: Mark Asselstine <asselsm@gmail.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
--- ---
drivers/net/wireless/rt2x00/Kconfig | 15 + drivers/net/wireless/rt2x00/Kconfig | 26 +
drivers/net/wireless/rt2x00/Makefile | 1 + drivers/net/wireless/rt2x00/Makefile | 1 +
drivers/net/wireless/rt2x00/rt2800pci.c | 3035 +++++++++++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2800pci.c | 3244 +++++++++++++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2800pci.h | 1880 +++++++++++++++++++ drivers/net/wireless/rt2x00/rt2800pci.h | 1927 ++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00.h | 6 + drivers/net/wireless/rt2x00/rt2x00.h | 6 +
5 files changed, 4937 insertions(+), 0 deletions(-) 5 files changed, 5204 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.c
create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h create mode 100644 drivers/net/wireless/rt2x00/rt2800pci.h
--- a/drivers/net/wireless/rt2x00/Makefile --- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile
@@ -16,5 +16,6 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00u @@ -17,5 +17,6 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00u
obj-$(CONFIG_RT2400PCI) += rt2400pci.o obj-$(CONFIG_RT2400PCI) += rt2400pci.o
obj-$(CONFIG_RT2500PCI) += rt2500pci.o obj-$(CONFIG_RT2500PCI) += rt2500pci.o
obj-$(CONFIG_RT61PCI) += rt61pci.o obj-$(CONFIG_RT61PCI) += rt61pci.o
@ -33,7 +33,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
obj-$(CONFIG_RT73USB) += rt73usb.o obj-$(CONFIG_RT73USB) += rt73usb.o
--- /dev/null --- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -0,0 +1,3035 @@ @@ -0,0 +1,3244 @@
+/* +/*
+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com> + <http://rt2x00.serialmonkey.com>
@ -72,13 +72,14 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ +
+#include "rt2x00.h" +#include "rt2x00.h"
+#include "rt2x00pci.h" +#include "rt2x00pci.h"
+#include "rt2x00soc.h"
+#include "rt2800pci.h" +#include "rt2800pci.h"
+ +
+/* FIXME: Make Kconfig dependent */ +#ifdef CONFIG_RT2800PCI_PCI_MODULE
+#ifdef CONFIG_PCI
+#define CONFIG_RT2800PCI_PCI +#define CONFIG_RT2800PCI_PCI
+#endif +#endif
+#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) +
+#ifdef CONFIG_RT2800PCI_WISOC_MODULE
+#define CONFIG_RT2800PCI_WISOC +#define CONFIG_RT2800PCI_WISOC
+#endif +#endif
+ +
@ -102,6 +103,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ */ + */
+#define WAIT_FOR_BBP(__dev, __reg) \ +#define WAIT_FOR_BBP(__dev, __reg) \
+ rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) + rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RFCSR(__dev, __reg) \
+ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \ +#define WAIT_FOR_RF(__dev, __reg) \
+ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) + rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+#define WAIT_FOR_MCU(__dev, __reg) \ +#define WAIT_FOR_MCU(__dev, __reg) \
@ -165,6 +168,61 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ mutex_unlock(&rt2x00dev->csr_mutex); + mutex_unlock(&rt2x00dev->csr_mutex);
+} +}
+ +
+static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u8 value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the RFCSR becomes available, afterwards we
+ * can safely write the new data into the register.
+ */
+ if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
+ }
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u8 *value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the RFCSR becomes available, afterwards we
+ * can safely write the read request into the register.
+ * After the data has been written, we wait until hardware
+ * returns the correct value, if at any time the register
+ * doesn't become available in time, reg will be 0xffffffff
+ * which means we return 0xff to the caller.
+ */
+ if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
+
+ WAIT_FOR_RFCSR(rt2x00dev, &reg);
+ }
+
+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev, +static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u32 value) + const unsigned int word, const u32 value)
+{ +{
@ -196,6 +254,13 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+{ +{
+ u32 reg; + u32 reg;
+ +
+ /*
+ * RT2880 and RT3052 don't support MCU requests.
+ */
+ if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
+ rt2x00_rt(&rt2x00dev->chip, RT3052))
+ return;
+
+ mutex_lock(&rt2x00dev->csr_mutex); + mutex_lock(&rt2x00dev->csr_mutex);
+ +
+ /* + /*
@ -765,13 +830,11 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ rt2x00dev->lna_gain = lna_gain; + rt2x00dev->lna_gain = lna_gain;
+} +}
+ +
+static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev, +static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf, + struct ieee80211_conf *conf,
+ struct rf_channel *rf, + struct rf_channel *rf,
+ struct channel_info *info) + struct channel_info *info)
+{ +{
+ u32 reg;
+ unsigned int tx_pin;
+ u16 eeprom; + u16 eeprom;
+ +
+ rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset); + rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
@ -781,9 +844,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ */ + */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom); + rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+ +
+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) { + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1)
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1); + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
+ }
+ +
+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) { + if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
+ rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1); + rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
@ -842,6 +904,62 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ rt2800pci_rf_write(rt2x00dev, 2, rf->rf2); + rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
+ rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004); + rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+ rt2800pci_rf_write(rt2x00dev, 4, rf->rf4); + rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
+}
+
+static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+ struct channel_info *info)
+{
+ u8 rfcsr;
+
+ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1);
+ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3);
+
+ rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
+ rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr);
+
+ rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
+ TXPOWER_G_TO_DEV(info->tx_power1));
+ rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr);
+
+ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
+ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
+
+ if (conf_is_ht40(conf))
+ rt2800pci_rfcsr_write(rt2x00dev, 24,
+ rt2x00dev->calibration_bw40);
+ else
+ rt2800pci_rfcsr_write(rt2x00dev, 24,
+ rt2x00dev->calibration_bw20);
+
+ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
+ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
+}
+
+static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+ struct channel_info *info)
+{
+ u32 reg;
+ unsigned int tx_pin;
+ u16 eeprom;
+ u8 bbp;
+
+ /*
+ * Determine antenna settings from EEPROM
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+ rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info);
+ else
+ rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info);
+ +
+ /* + /*
+ * Change BBP settings + * Change BBP settings
@ -897,6 +1015,26 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ +
+ rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); + rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+ +
+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
+ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
+
+ rt2800pci_bbp_read(rt2x00dev, 3, &bbp);
+ rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
+ rt2800pci_bbp_write(rt2x00dev, 3, bbp);
+
+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+ if (conf_is_ht40(conf)) {
+ rt2800pci_bbp_write(rt2x00dev, 69, 0x1a);
+ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
+ rt2800pci_bbp_write(rt2x00dev, 73, 0x16);
+ } else {
+ rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
+ rt2800pci_bbp_write(rt2x00dev, 70, 0x08);
+ rt2800pci_bbp_write(rt2x00dev, 73, 0x11);
+ }
+ }
+
+ msleep(1); + msleep(1);
+} +}
+ +
@ -1301,7 +1439,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ entry_priv = rt2x00dev->rx->entries[0].priv_data; + entry_priv = rt2x00dev->rx->entries[0].priv_data;
+ rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma); + rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
+ rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit); + rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, 0); + rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
+ rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0); + rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0);
+ +
+ /* + /*
@ -1659,6 +1797,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION) + if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
+ rt2800pci_bbp_write(rt2x00dev, 84, 0x19); + rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
+ +
+ if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
+ rt2800pci_bbp_write(rt2x00dev, 31, 0x08);
+ rt2800pci_bbp_write(rt2x00dev, 78, 0x0e);
+ rt2800pci_bbp_write(rt2x00dev, 80, 0x08);
+ }
+
+ for (i = 0; i < EEPROM_BBP_SIZE; i++) { + for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); + rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+ +
@ -1672,6 +1816,144 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ return 0; + return 0;
+} +}
+ +
+static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev,
+ bool bw40, u8 rfcsr24, u8 filter_target)
+{
+ unsigned int i;
+ u8 bbp;
+ u8 rfcsr;
+ u8 passband;
+ u8 stopband;
+ u8 overtuned = 0;
+
+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
+
+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
+ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
+
+ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
+ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+ /*
+ * Set power & frequency of passband test tone
+ */
+ rt2800pci_bbp_write(rt2x00dev, 24, 0);
+
+ for (i = 0; i < 100; i++) {
+ rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
+ msleep(1);
+
+ rt2800pci_bbp_read(rt2x00dev, 55, &passband);
+ if (passband)
+ break;
+ }
+
+ /*
+ * Set power & frequency of stopband test tone
+ */
+ rt2800pci_bbp_write(rt2x00dev, 24, 0x06);
+
+ for (i = 0; i < 100; i++) {
+ rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
+ msleep(1);
+
+ rt2800pci_bbp_read(rt2x00dev, 55, &stopband);
+
+ if ((passband - stopband) <= filter_target) {
+ rfcsr24++;
+ overtuned += ((passband - stopband) == filter_target);
+ } else
+ break;
+
+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
+ }
+
+ rfcsr24 -= !!overtuned;
+
+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
+ return rfcsr24;
+}
+
+static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev)
+{
+ u8 rfcsr;
+ u8 bbp;
+
+ if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF3022))
+ return 0;
+
+ /*
+ * Init RF calibration.
+ */
+ rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
+ msleep(1);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+ rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50);
+ rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01);
+ rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7);
+ rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75);
+ rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40);
+ rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03);
+ rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02);
+ rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50);
+ rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39);
+ rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f);
+ rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60);
+ rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21);
+ rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75);
+ rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75);
+ rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90);
+ rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58);
+ rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3);
+ rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92);
+ rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c);
+ rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02);
+ rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba);
+ rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb);
+ rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00);
+ rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31);
+ rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08);
+ rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01);
+ rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25);
+ rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23);
+ rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13);
+ rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83);
+
+ /*
+ * Set RX Filter calibration for 20MHz and 40MHz
+ */
+ rt2x00dev->calibration_bw20 =
+ rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
+ rt2x00dev->calibration_bw40 =
+ rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
+
+ /*
+ * Set back to initial state
+ */
+ rt2800pci_bbp_write(rt2x00dev, 24, 0);
+
+ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
+ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+ /*
+ * set BBP back to BW20
+ */
+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
+ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
+
+ return 0;
+}
+
+/* +/*
+ * Device state switch handlers. + * Device state switch handlers.
+ */ + */
@ -1754,7 +2036,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ rt2800pci_init_queues(rt2x00dev) || + rt2800pci_init_queues(rt2x00dev) ||
+ rt2800pci_init_registers(rt2x00dev) || + rt2800pci_init_registers(rt2x00dev) ||
+ rt2800pci_wait_wpdma_ready(rt2x00dev) || + rt2800pci_wait_wpdma_ready(rt2x00dev) ||
+ rt2800pci_init_bbp(rt2x00dev))) + rt2800pci_init_bbp(rt2x00dev) ||
+ rt2800pci_init_rfcsr(rt2x00dev)))
+ return -EIO; + return -EIO;
+ +
+ /* + /*
@ -2150,6 +2433,12 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); + rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
+ +
+ /* + /*
+ * Set RX IDX in register to inform hardware that we have handled
+ * this entry and it is available for reuse again.
+ */
+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
+
+ /*
+ * Remove TXWI descriptor from start of buffer. + * Remove TXWI descriptor from start of buffer.
+ */ + */
+ skb_pull(entry->skb, RXWI_DESC_SIZE); + skb_pull(entry->skb, RXWI_DESC_SIZE);
@ -2416,7 +2705,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ !rt2x00_rf(&rt2x00dev->chip, RF2750) && + !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF3020) && + !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2020) && + !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF3052)) { + !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF3022)) {
+ ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+ return -ENODEV; + return -ENODEV;
+ } + }
@ -2496,8 +2786,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ /* 802.11 HyperLan 2 */ + /* 802.11 HyperLan 2 */
+ { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, + { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
+ { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, + { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
+ { 104, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed1a3 }, + { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
+ { 108, 0x18402ecc, 0x184c0a32, 0x18578a55, 0x180ed193 }, + { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
+ { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, + { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
+ { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, + { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
+ { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, + { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
@ -2564,7 +2854,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ +
+ if (rt2x00_rf(&rt2x00dev->chip, RF2820) || + if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
+ rt2x00_rf(&rt2x00dev->chip, RF2720) || + rt2x00_rf(&rt2x00dev->chip, RF2720) ||
+ rt2x00_rf(&rt2x00dev->chip, RF3052)) { + rt2x00_rf(&rt2x00dev->chip, RF3021) ||
+ rt2x00_rf(&rt2x00dev->chip, RF3022)) {
+ spec->num_channels = 14; + spec->num_channels = 14;
+ spec->channels = rf_vals; + spec->channels = rf_vals;
+ } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) || + } else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
@ -2660,7 +2951,9 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ /* + /*
+ * This device requires firmware. + * This device requires firmware.
+ */ + */
+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags); + if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
+ !rt2x00_rt(&rt2x00dev->chip, RT3052))
+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+ if (!modparam_nohwcrypt) + if (!modparam_nohwcrypt)
+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags); + __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+ +
@ -2898,7 +3191,6 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+/* +/*
+ * RT2800pci module information. + * RT2800pci module information.
+ */ + */
+#ifdef CONFIG_RT2800PCI_PCI
+static struct pci_device_id rt2800pci_device_table[] = { +static struct pci_device_id rt2800pci_device_table[] = {
+ { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
+ { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
@ -2910,126 +3202,34 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) }, + { PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
+ { 0, } + { 0, }
+}; +};
+MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
+#endif /* CONFIG_RT2800PCI_PCI */
+ +
+MODULE_AUTHOR(DRV_PROJECT); +MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION); +MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver."); +MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver.");
+MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards"); +MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards");
+#ifdef CONFIG_RT2800PCI_PCI
+MODULE_FIRMWARE(FIRMWARE_RT2860); +MODULE_FIRMWARE(FIRMWARE_RT2860);
+MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
+#endif /* CONFIG_RT2800PCI_PCI */
+MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL");
+ +
+#ifdef CONFIG_RT2800PCI_WISOC +#ifdef CONFIG_RT2800PCI_WISOC
+ +#if defined(CONFIG_RALINK_RT288X)
+#ifdef CONFIG_RALINK_RT288X +__rt2x00soc_probe(RT2880, &rt2800pci_ops);
+#define WSOC_RT_CHIPSET RT2880 +#elif defined(CONFIG_RALINK_RT305X)
+#endif /* CONFIG_RALINK_RT288X */ +__rt2x00soc_probe(RT3052, &rt2800pci_ops);
+ +#endif
+#ifdef CONFIG_RALINK_RT305X
+#define WSOC_RT_CHIPSET RT3052
+#endif /* CONFIG_RALINK_RT305X */
+
+static void rt2800soc_free_reg(struct rt2x00_dev *rt2x00dev)
+{
+ kfree(rt2x00dev->rf);
+ rt2x00dev->rf = NULL;
+
+ kfree(rt2x00dev->eeprom);
+ rt2x00dev->eeprom = NULL;
+}
+
+static int rt2800soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
+{
+ struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ERROR_PROBE("Failed to get MMIO resource\n");
+ return -ENODEV;
+ }
+
+ rt2x00dev->csr.base = (void __iomem *) KSEG1ADDR(res->start);
+ rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
+ if (!rt2x00dev->eeprom)
+ goto exit;
+
+ rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
+ if (!rt2x00dev->rf)
+ goto exit;
+
+ return 0;
+
+exit:
+ ERROR_PROBE("Failed to allocate registers.\n");
+ rt2800soc_free_reg(rt2x00dev);
+
+ return -ENOMEM;
+}
+
+static int rt2800soc_probe(struct platform_device *pdev)
+{
+ const struct rt2x00_ops *ops = &rt2800pci_ops;
+ struct ieee80211_hw *hw;
+ struct rt2x00_dev *rt2x00dev;
+ int retval;
+
+ hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
+ if (!hw) {
+ ERROR_PROBE("Failed to allocate hardware.\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, hw);
+
+ rt2x00dev = hw->priv;
+ rt2x00dev->dev = &pdev->dev;
+ rt2x00dev->ops = ops;
+ rt2x00dev->hw = hw;
+ rt2x00dev->irq = platform_get_irq(pdev, 0);
+ rt2x00dev->name = pdev->dev.driver->name;
+
+ rt2x00_set_chip_rt(rt2x00dev, WSOC_RT_CHIPSET);
+
+ retval = rt2800soc_alloc_reg(rt2x00dev);
+ if (retval)
+ goto exit_free_device;
+
+ retval = rt2x00lib_probe_dev(rt2x00dev);
+ if (retval)
+ goto exit_free_reg;
+
+ return 0;
+
+exit_free_reg:
+ rt2800soc_free_reg(rt2x00dev);
+
+exit_free_device:
+ ieee80211_free_hw(hw);
+
+ return retval;
+}
+
+static int rt2800soc_remove(struct platform_device *pdev)
+{
+ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+
+ /*
+ * Free all allocated data.
+ */
+ rt2x00lib_remove_dev(rt2x00dev);
+ rt2800soc_free_reg(rt2x00dev);
+ ieee80211_free_hw(hw);
+
+ return 0;
+}
+ +
+static struct platform_driver rt2800soc_driver = { +static struct platform_driver rt2800soc_driver = {
+ .driver.name = "rt2800_wmac", + .driver = {
+ .probe = rt2800soc_probe, + .name = "rt2800_wmac",
+ .remove = rt2800soc_remove, + .owner = THIS_MODULE,
+ .mod_name = KBUILD_MODNAME,
+ },
+ .probe = __rt2x00soc_probe,
+ .remove = __devexit_p(rt2x00soc_remove),
+ .suspend = rt2x00soc_suspend,
+ .resume = rt2x00soc_resume,
+}; +};
+#endif /* CONFIG_RT2800PCI_WISOC */ +#endif /* CONFIG_RT2800PCI_WISOC */
+ +
@ -3050,10 +3250,19 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ +
+#ifdef CONFIG_RT2800PCI_WISOC +#ifdef CONFIG_RT2800PCI_WISOC
+ ret = platform_driver_register(&rt2800soc_driver); + ret = platform_driver_register(&rt2800soc_driver);
+ if (ret)
+ return ret;
+#endif +#endif
+#ifdef CONFIG_RT2800PCI_PCI +#ifdef CONFIG_RT2800PCI_PCI
+ ret = pci_register_driver(&rt2800pci_driver); + ret = pci_register_driver(&rt2800pci_driver);
+ if (ret) {
+#ifdef CONFIG_RT2800PCI_WISOC
+ platform_driver_unregister(&rt2800soc_driver);
+#endif
+ return ret;
+ }
+#endif +#endif
+
+ return ret; + return ret;
+} +}
+ +
@ -3071,7 +3280,7 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+module_exit(rt2800pci_exit); +module_exit(rt2800pci_exit);
--- /dev/null --- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800pci.h +++ b/drivers/net/wireless/rt2x00/rt2800pci.h
@@ -0,0 +1,1880 @@ @@ -0,0 +1,1927 @@
+/* +/*
+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com> + <http://rt2x00.serialmonkey.com>
@ -3110,7 +3319,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ * RF2750 2.4G/5G 1T2R + * RF2750 2.4G/5G 1T2R
+ * RF3020 2.4G 1T1R + * RF3020 2.4G 1T1R
+ * RF2020 2.4G B/G + * RF2020 2.4G B/G
+ * RF3052 2.4G 2T2R + * RF3021 2.4G 1T2R
+ * RF3022 2.4G 2T2R
+ */ + */
+#define RF2820 0x0001 +#define RF2820 0x0001
+#define RF2850 0x0002 +#define RF2850 0x0002
@ -3118,7 +3328,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+#define RF2750 0x0004 +#define RF2750 0x0004
+#define RF3020 0x0005 +#define RF3020 0x0005
+#define RF2020 0x0006 +#define RF2020 0x0006
+#define RF3052 0x0008 +#define RF3021 0x0007
+#define RF3022 0x0008
+ +
+/* +/*
+ * RT2860 version + * RT2860 version
@ -3157,12 +3368,6 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ */ + */
+ +
+/* +/*
+ * PCI Configuration Header
+ */
+#define PCI_CONFIG_HEADER_VENDOR 0x0000
+#define PCI_CONFIG_HEADER_DEVICE 0x0002
+
+/*
+ * E2PROM_CSR: EEPROM control register. + * E2PROM_CSR: EEPROM control register.
+ * RELOAD: Write 1 to reload eeprom content. + * RELOAD: Write 1 to reload eeprom content.
+ * TYPE: 0: 93c46, 1:93c66. + * TYPE: 0: 93c46, 1:93c66.
@ -3453,6 +3658,15 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+#define PBF_DBG 0x043c +#define PBF_DBG 0x043c
+ +
+/* +/*
+ * RF registers
+ */
+#define RF_CSR_CFG 0x0500
+#define RF_CSR_CFG_DATA FIELD32(0x000000ff)
+#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00)
+#define RF_CSR_CFG_WRITE FIELD32(0x00010000)
+#define RF_CSR_CFG_BUSY FIELD32(0x00020000)
+
+/*
+ * MAC Control/Status Registers(CSR). + * MAC Control/Status Registers(CSR).
+ * Some values are set in TU, whereas 1 TU == 1024 us. + * Some values are set in TU, whereas 1 TU == 1024 us.
+ */ + */
@ -4545,6 +4759,48 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ * BBP 3: RX Antenna + * BBP 3: RX Antenna
+ */ + */
+#define BBP3_RX_ANTENNA FIELD8(0x18) +#define BBP3_RX_ANTENNA FIELD8(0x18)
+#define BBP3_HT40_PLUS FIELD8(0x20)
+
+/*
+ * BBP 4: Bandwidth
+ */
+#define BBP4_TX_BF FIELD8(0x01)
+#define BBP4_BANDWIDTH FIELD8(0x18)
+
+/*
+ * RFCSR registers
+ * The wordsize of the RFCSR is 8 bits.
+ */
+
+/*
+ * RFCSR 6:
+ */
+#define RFCSR6_R FIELD8(0x03)
+
+/*
+ * RFCSR 7:
+ */
+#define RFCSR7_RF_TUNING FIELD8(0x01)
+
+/*
+ * RFCSR 12:
+ */
+#define RFCSR12_TX_POWER FIELD8(0x1f)
+
+/*
+ * RFCSR 22:
+ */
+#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
+
+/*
+ * RFCSR 23:
+ */
+#define RFCSR23_FREQ_OFFSET FIELD8(0x7f)
+
+/*
+ * RFCSR 30:
+ */
+#define RFCSR30_RF_CALIBRATION FIELD8(0x80)
+ +
+/* +/*
+ * RF registers + * RF registers

@ -1,535 +0,0 @@
From bfa282e0f525b074ec9a21372ab906156ce0aa20 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Mon, 16 Mar 2009 20:16:59 +0100
Subject: [PATCH] rt2x00: DMA fixes & new chipset support (rt2800pci)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800pci.c | 320 +++++++++++++++++++++++++++++--
drivers/net/wireless/rt2x00/rt2800pci.h | 57 ++++++-
2 files changed, 361 insertions(+), 16 deletions(-)
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -66,6 +66,8 @@ MODULE_PARM_DESC(nohwcrypt, "Disable har
*/
#define WAIT_FOR_BBP(__dev, __reg) \
rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RFCSR(__dev, __reg) \
+ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
#define WAIT_FOR_RF(__dev, __reg) \
rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
#define WAIT_FOR_MCU(__dev, __reg) \
@@ -129,6 +131,61 @@ static void rt2800pci_bbp_read(struct rt
mutex_unlock(&rt2x00dev->csr_mutex);
}
+static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u8 value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the RFCSR becomes available, afterwards we
+ * can safely write the new data into the register.
+ */
+ if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
+ }
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u8 *value)
+{
+ u32 reg;
+
+ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
+ * Wait until the RFCSR becomes available, afterwards we
+ * can safely write the read request into the register.
+ * After the data has been written, we wait until hardware
+ * returns the correct value, if at any time the register
+ * doesn't become available in time, reg will be 0xffffffff
+ * which means we return 0xff to the caller.
+ */
+ if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+ reg = 0;
+ rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
+ rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
+
+ WAIT_FOR_RFCSR(rt2x00dev, &reg);
+ }
+
+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
+
+ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, const u32 value)
{
@@ -160,6 +217,13 @@ static void rt2800pci_mcu_request(struct
{
u32 reg;
+ /*
+ * RT2880 and RT3052 don't support MCU requests.
+ */
+ if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
+ rt2x00_rt(&rt2x00dev->chip, RT3052))
+ return;
+
mutex_lock(&rt2x00dev->csr_mutex);
/*
@@ -729,13 +793,11 @@ static void rt2800pci_config_lna_gain(st
rt2x00dev->lna_gain = lna_gain;
}
-static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
- struct ieee80211_conf *conf,
- struct rf_channel *rf,
- struct channel_info *info)
+static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+ struct channel_info *info)
{
- u32 reg;
- unsigned int tx_pin;
u16 eeprom;
rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
@@ -745,9 +807,8 @@ static void rt2800pci_config_channel(str
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
- if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1) {
+ if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1)
rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
- }
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1) {
rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
@@ -806,6 +867,62 @@ static void rt2800pci_config_channel(str
rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
+}
+
+static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+ struct channel_info *info)
+{
+ u8 rfcsr;
+
+ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1);
+ rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3);
+
+ rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
+ rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr);
+
+ rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
+ TXPOWER_G_TO_DEV(info->tx_power1));
+ rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr);
+
+ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
+ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
+
+ if (conf_is_ht40(conf))
+ rt2800pci_rfcsr_write(rt2x00dev, 24,
+ rt2x00dev->calibration_bw40);
+ else
+ rt2800pci_rfcsr_write(rt2x00dev, 24,
+ rt2x00dev->calibration_bw20);
+
+ rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
+ rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
+}
+
+static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+ struct channel_info *info)
+{
+ u32 reg;
+ unsigned int tx_pin;
+ u16 eeprom;
+ u8 bbp;
+
+ /*
+ * Determine antenna settings from EEPROM
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+ if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+ rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info);
+ else
+ rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info);
/*
* Change BBP settings
@@ -861,6 +978,26 @@ static void rt2800pci_config_channel(str
rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
+ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
+
+ rt2800pci_bbp_read(rt2x00dev, 3, &bbp);
+ rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
+ rt2800pci_bbp_write(rt2x00dev, 3, bbp);
+
+ if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+ if (conf_is_ht40(conf)) {
+ rt2800pci_bbp_write(rt2x00dev, 69, 0x1a);
+ rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
+ rt2800pci_bbp_write(rt2x00dev, 73, 0x16);
+ } else {
+ rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
+ rt2800pci_bbp_write(rt2x00dev, 70, 0x08);
+ rt2800pci_bbp_write(rt2x00dev, 73, 0x11);
+ }
+ }
+
msleep(1);
}
@@ -1265,7 +1402,7 @@ static int rt2800pci_init_queues(struct
entry_priv = rt2x00dev->rx->entries[0].priv_data;
rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
- rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, 0);
+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0);
/*
@@ -1613,7 +1750,7 @@ static int rt2800pci_init_bbp(struct rt2
rt2800pci_bbp_write(rt2x00dev, 91, 0x04);
rt2800pci_bbp_write(rt2x00dev, 92, 0x00);
rt2800pci_bbp_write(rt2x00dev, 103, 0x00);
- rt2800pci_bbp_write(rt2x00dev, 105, 0x05);
+ rt2800pci_bbp_write(rt2x00dev, 105, 0x01);
if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
@@ -1623,6 +1760,12 @@ static int rt2800pci_init_bbp(struct rt2
if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
+ if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
+ rt2800pci_bbp_write(rt2x00dev, 31, 0x08);
+ rt2800pci_bbp_write(rt2x00dev, 78, 0x0e);
+ rt2800pci_bbp_write(rt2x00dev, 80, 0x08);
+ }
+
for (i = 0; i < EEPROM_BBP_SIZE; i++) {
rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
@@ -1636,6 +1779,144 @@ static int rt2800pci_init_bbp(struct rt2
return 0;
}
+static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev,
+ bool bw40, u8 rfcsr24, u8 filter_target)
+{
+ unsigned int i;
+ u8 bbp;
+ u8 rfcsr;
+ u8 passband;
+ u8 stopband;
+ u8 overtuned = 0;
+
+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
+
+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
+ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
+
+ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
+ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+ /*
+ * Set power & frequency of passband test tone
+ */
+ rt2800pci_bbp_write(rt2x00dev, 24, 0);
+
+ for (i = 0; i < 100; i++) {
+ rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
+ msleep(1);
+
+ rt2800pci_bbp_read(rt2x00dev, 55, &passband);
+ if (passband)
+ break;
+ }
+
+ /*
+ * Set power & frequency of stopband test tone
+ */
+ rt2800pci_bbp_write(rt2x00dev, 24, 0x06);
+
+ for (i = 0; i < 100; i++) {
+ rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
+ msleep(1);
+
+ rt2800pci_bbp_read(rt2x00dev, 55, &stopband);
+
+ if ((passband - stopband) <= filter_target) {
+ rfcsr24++;
+ overtuned += ((passband - stopband) == filter_target);
+ } else
+ break;
+
+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
+ }
+
+ rfcsr24 -= !!overtuned;
+
+ rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
+ return rfcsr24;
+}
+
+static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev)
+{
+ u8 rfcsr;
+ u8 bbp;
+
+ if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF3022))
+ return 0;
+
+ /*
+ * Init RF calibration.
+ */
+ rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
+ msleep(1);
+ rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+ rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+ rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50);
+ rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01);
+ rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7);
+ rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75);
+ rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40);
+ rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03);
+ rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02);
+ rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50);
+ rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39);
+ rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f);
+ rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60);
+ rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21);
+ rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75);
+ rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75);
+ rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90);
+ rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58);
+ rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3);
+ rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92);
+ rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c);
+ rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02);
+ rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba);
+ rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb);
+ rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00);
+ rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31);
+ rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08);
+ rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01);
+ rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25);
+ rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23);
+ rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13);
+ rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83);
+
+ /*
+ * Set RX Filter calibration for 20MHz and 40MHz
+ */
+ rt2x00dev->calibration_bw20 =
+ rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
+ rt2x00dev->calibration_bw40 =
+ rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
+
+ /*
+ * Set back to initial state
+ */
+ rt2800pci_bbp_write(rt2x00dev, 24, 0);
+
+ rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
+ rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+ /*
+ * set BBP back to BW20
+ */
+ rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
+ rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
+ rt2800pci_bbp_write(rt2x00dev, 4, bbp);
+
+ return 0;
+}
+
/*
* Device state switch handlers.
*/
@@ -1718,7 +1999,8 @@ static int rt2800pci_enable_radio(struct
rt2800pci_init_queues(rt2x00dev) ||
rt2800pci_init_registers(rt2x00dev) ||
rt2800pci_wait_wpdma_ready(rt2x00dev) ||
- rt2800pci_init_bbp(rt2x00dev)))
+ rt2800pci_init_bbp(rt2x00dev) ||
+ rt2800pci_init_rfcsr(rt2x00dev)))
return -EIO;
/*
@@ -2114,6 +2396,12 @@ static void rt2800pci_fill_rxdone(struct
rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
/*
+ * Set RX IDX in register to inform hardware that we have handled
+ * this entry and it is available for reuse again.
+ */
+ rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
+
+ /*
* Remove TXWI descriptor from start of buffer.
*/
skb_pull(entry->skb, RXWI_DESC_SIZE);
@@ -2380,7 +2668,8 @@ static int rt2800pci_init_eeprom(struct
!rt2x00_rf(&rt2x00dev->chip, RF2750) &&
!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
!rt2x00_rf(&rt2x00dev->chip, RF2020) &&
- !rt2x00_rf(&rt2x00dev->chip, RF3052)) {
+ !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF3022)) {
ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
return -ENODEV;
}
@@ -2528,7 +2817,8 @@ static int rt2800pci_probe_hw_mode(struc
if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
rt2x00_rf(&rt2x00dev->chip, RF2720) ||
- rt2x00_rf(&rt2x00dev->chip, RF3052)) {
+ rt2x00_rf(&rt2x00dev->chip, RF3021) ||
+ rt2x00_rf(&rt2x00dev->chip, RF3022)) {
spec->num_channels = 14;
spec->channels = rf_vals;
} else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
@@ -2624,7 +2914,9 @@ static int rt2800pci_probe_hw(struct rt2
/*
* This device requires firmware.
*/
- __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+ if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
+ !rt2x00_rt(&rt2x00dev->chip, RT3052))
+ __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
if (!modparam_nohwcrypt)
__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
--- a/drivers/net/wireless/rt2x00/rt2800pci.h
+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
@@ -36,7 +36,8 @@
* RF2750 2.4G/5G 1T2R
* RF3020 2.4G 1T1R
* RF2020 2.4G B/G
- * RF3052 2.4G 2T2R
+ * RF3021 2.4G 1T2R
+ * RF3022 2.4G 2T2R
*/
#define RF2820 0x0001
#define RF2850 0x0002
@@ -44,7 +45,8 @@
#define RF2750 0x0004
#define RF3020 0x0005
#define RF2020 0x0006
-#define RF3052 0x0008
+#define RF3021 0x0007
+#define RF3022 0x0008
/*
* RT2860 version
@@ -373,6 +375,15 @@
#define PBF_DBG 0x043c
/*
+ * RF registers
+ */
+#define RF_CSR_CFG 0x0500
+#define RF_CSR_CFG_DATA FIELD32(0x000000ff)
+#define RF_CSR_CFG_REGNUM FIELD32(0x00001f00)
+#define RF_CSR_CFG_WRITE FIELD32(0x00010000)
+#define RF_CSR_CFG_BUSY FIELD32(0x00020000)
+
+/*
* MAC Control/Status Registers(CSR).
* Some values are set in TU, whereas 1 TU == 1024 us.
*/
@@ -1465,6 +1476,48 @@ struct mac_iveiv_entry {
* BBP 3: RX Antenna
*/
#define BBP3_RX_ANTENNA FIELD8(0x18)
+#define BBP3_HT40_PLUS FIELD8(0x20)
+
+/*
+ * BBP 4: Bandwidth
+ */
+#define BBP4_TX_BF FIELD8(0x01)
+#define BBP4_BANDWIDTH FIELD8(0x18)
+
+/*
+ * RFCSR registers
+ * The wordsize of the RFCSR is 8 bits.
+ */
+
+/*
+ * RFCSR 6:
+ */
+#define RFCSR6_R FIELD8(0x03)
+
+/*
+ * RFCSR 7:
+ */
+#define RFCSR7_RF_TUNING FIELD8(0x01)
+
+/*
+ * RFCSR 12:
+ */
+#define RFCSR12_TX_POWER FIELD8(0x1f)
+
+/*
+ * RFCSR 22:
+ */
+#define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01)
+
+/*
+ * RFCSR 23:
+ */
+#define RFCSR23_FREQ_OFFSET FIELD8(0x7f)
+
+/*
+ * RFCSR 30:
+ */
+#define RFCSR30_RF_CALIBRATION FIELD8(0x80)
/*
* RF registers

@ -1,7 +1,7 @@
From 101b65d221593c1bdeacf0c6085d885ea5447c4c Mon Sep 17 00:00:00 2001 From 3924d0442771e17c26ab10ad53a1807e800ab3f1 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com> From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Sat, 14 Mar 2009 20:46:40 +0100 Date: Sat, 28 Mar 2009 20:48:56 +0100
Subject: [PATCH] rt2x00: Implement support for rt2800usb Subject: [PATCH 9/9] rt2x00: Implement support for rt2800usb
Add support for the rt2800usb chipset. Add support for the rt2800usb chipset.
@ -15,23 +15,23 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
--- ---
drivers/net/wireless/rt2x00/Kconfig | 14 + drivers/net/wireless/rt2x00/Kconfig | 14 +
drivers/net/wireless/rt2x00/Makefile | 1 + drivers/net/wireless/rt2x00/Makefile | 1 +
drivers/net/wireless/rt2x00/rt2800usb.c | 3032 +++++++++++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2800usb.c | 3036 +++++++++++++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2800usb.h | 1934 ++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2800usb.h | 1934 ++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2x00.h | 7 + drivers/net/wireless/rt2x00/rt2x00.h | 1 +
5 files changed, 4988 insertions(+), 0 deletions(-) 5 files changed, 4986 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.c create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.c
create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.h create mode 100644 drivers/net/wireless/rt2x00/rt2800usb.h
--- a/drivers/net/wireless/rt2x00/Makefile --- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile +++ b/drivers/net/wireless/rt2x00/Makefile
@@ -19,3 +19,4 @@ obj-$(CONFIG_RT61PCI) += rt61pci.o @@ -20,3 +20,4 @@ obj-$(CONFIG_RT61PCI) += rt61pci.o
obj-$(CONFIG_RT2800PCI) += rt2800pci.o obj-$(CONFIG_RT2800PCI) += rt2800pci.o
obj-$(CONFIG_RT2500USB) += rt2500usb.o obj-$(CONFIG_RT2500USB) += rt2500usb.o
obj-$(CONFIG_RT73USB) += rt73usb.o obj-$(CONFIG_RT73USB) += rt73usb.o
+obj-$(CONFIG_RT2800USB) += rt2800usb.o +obj-$(CONFIG_RT2800USB) += rt2800usb.o
--- /dev/null --- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -0,0 +1,3032 @@ @@ -0,0 +1,3036 @@
+/* +/*
+ Copyright (C) 2004 - 2009 rt2x00 SourceForge Project + Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com> + <http://rt2x00.serialmonkey.com>
@ -2472,8 +2472,8 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ /* 802.11 HyperLan 2 */ + /* 802.11 HyperLan 2 */
+ { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 }, + { 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
+ { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 }, + { 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
+ { 104, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed1a3 }, + { 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
+ { 108, 0x18402ecc, 0x184c0a32, 0x18578a55, 0x180ed193 }, + { 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
+ { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 }, + { 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
+ { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b }, + { 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
+ { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 }, + { 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
@ -2495,6 +2495,10 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+ { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 }, + { 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
+ { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 }, + { 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
+ { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 }, + { 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
+ { 167, 0x18402ec4, 0x184c03d2, 0x18179855, 0x1815531f },
+ { 169, 0x18402ec4, 0x184c03d2, 0x18179855, 0x18155327 },
+ { 171, 0x18402ec4, 0x184c03d6, 0x18179855, 0x18155307 },
+ { 173, 0x18402ec4, 0x184c03d6, 0x18179855, 0x1815530f },
+ +
+ /* 802.11 Japan */ + /* 802.11 Japan */
+ { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b }, + { 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
@ -5011,16 +5015,3 @@ Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
u16 rf; u16 rf;
u32 rev; u32 rev;
@@ -788,6 +789,12 @@ struct rt2x00_dev {
u8 freq_offset;
/*
+ * Calibration information (for rt2800usb).
+ */
+ u8 calibration_bw20;
+ u8 calibration_bw40;
+
+ /*
* Low level statistics which will have
* to be kept up to date while device is running.
*/

@ -1,136 +0,0 @@
From e6cbd7e05f7c1fe0a737526d20f39b4a52e03ae8 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <IvDoorn@gmail.com>
Date: Tue, 17 Mar 2009 14:01:29 +0100
Subject: [PATCH] rt2x00: Fix compile errors for SoC
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
---
drivers/net/wireless/rt2x00/rt2800pci.c | 37 +++++++++++++++----------------
1 files changed, 18 insertions(+), 19 deletions(-)
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -3186,7 +3186,7 @@ MODULE_LICENSE("GPL");
#define WSOC_RT_CHIPSET RT3052
#endif /* CONFIG_RALINK_RT305X */
-static void rt2800soc_free_reg(struct rt2x00_dev *rt2x00dev)
+static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev)
{
kfree(rt2x00dev->rf);
rt2x00dev->rf = NULL;
@@ -3195,7 +3195,7 @@ static void rt2800soc_free_reg(struct rt
rt2x00dev->eeprom = NULL;
}
-static int rt2800soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
+static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
{
struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
struct resource *res;
@@ -3219,14 +3219,14 @@ static int rt2800soc_alloc_reg(struct rt
exit:
ERROR_PROBE("Failed to allocate registers.\n");
- rt2800soc_free_reg(rt2x00dev);
+ rt2x00soc_free_reg(rt2x00dev);
return -ENOMEM;
}
-static int rt2800soc_probe(struct platform_device *pdev)
+static int rt2x00soc_probe(struct platform_device *pdev)
{
- struct rt2x00_ops *ops = (struct rt2x00_ops *)pdev->driver->p;
+ const struct rt2x00_ops *ops = &rt2800pci_ops;
struct ieee80211_hw *hw;
struct rt2x00_dev *rt2x00dev;
int retval;
@@ -3248,7 +3248,7 @@ static int rt2800soc_probe(struct platfo
rt2x00_set_chip_rt(rt2x00dev, WSOC_RT_CHIPSET);
- retval = rt2800soc_alloc_reg(rt2x00dev);
+ retval = rt2x00soc_alloc_reg(rt2x00dev);
if (retval)
goto exit_free_device;
@@ -3259,7 +3259,7 @@ static int rt2800soc_probe(struct platfo
return 0;
exit_free_reg:
- rt2800soc_free_reg(rt2x00dev);
+ rt2x00soc_free_reg(rt2x00dev);
exit_free_device:
ieee80211_free_hw(hw);
@@ -3267,7 +3267,7 @@ exit_free_device:
return retval;
}
-static int rt2800soc_remove(struct platform_device *pdev)
+static int rt2x00soc_remove(struct platform_device *pdev)
{
struct ieee80211_hw *hw = platform_get_drvdata(pdev);
struct rt2x00_dev *rt2x00dev = hw->priv;
@@ -3276,16 +3276,16 @@ static int rt2800soc_remove(struct platf
* Free all allocated data.
*/
rt2x00lib_remove_dev(rt2x00dev);
- rt2800soc_free_reg(rt2x00dev);
+ rt2x00soc_free_reg(rt2x00dev);
ieee80211_free_hw(hw);
return 0;
}
#ifdef CONFIG_PM
-int rt2x00soc_suspend(struct device *dev, pm_message_t state)
+int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct ieee80211_hw *hw = dev_get_drvdata(dev);
+ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
struct rt2x00_dev *rt2x00dev = hw->priv;
int retval;
@@ -3293,14 +3293,14 @@ int rt2x00soc_suspend(struct device *dev
if (retval)
return retval;
- rt2800soc_free_reg(rt2x00dev);
+ rt2x00soc_free_reg(rt2x00dev);
return 0;
}
-int rt2x00soc_resume(struct device *dev)
+int rt2x00soc_resume(struct platform_device *pdev)
{
- struct ieee80211_hw *hw = dev_get_drvdata(dev);
+ struct ieee80211_hw *hw = platform_get_drvdata(pdev);
struct rt2x00_dev *rt2x00dev = hw->priv;
int retval;
@@ -3315,7 +3315,7 @@ int rt2x00soc_resume(struct device *dev)
return 0;
exit_free_reg:
- rt2x00pci_free_reg(rt2x00dev);
+ rt2x00soc_free_reg(rt2x00dev);
return retval;
}
@@ -3326,10 +3326,9 @@ static struct platform_driver rt2800soc_
.name = "rt2800_wmac",
.owner = THIS_MODULE,
.mod_name = KBUILD_MODNAME,
- .p = &rt2800pci_ops;
- }
- .probe = rt2800soc_probe,
- .remove = __devexit_p(rt2800soc_remove),
+ },
+ .probe = rt2x00soc_probe,
+ .remove = __devexit_p(rt2x00soc_remove),
.suspend = rt2x00soc_suspend,
.resume = rt2x00soc_resume,
};

@ -4,10 +4,8 @@ This patch is submitted upstream and can be removed when it hits compat-wireless
Index: compat-wireless-2009-03-24/drivers/net/wireless/b43/b43.h --- a/drivers/net/wireless/b43/b43.h
=================================================================== +++ b/drivers/net/wireless/b43/b43.h
--- compat-wireless-2009-03-24.orig/drivers/net/wireless/b43/b43.h 2009-03-29 13:27:05.000000000 +0200
+++ compat-wireless-2009-03-24/drivers/net/wireless/b43/b43.h 2009-03-29 13:27:21.000000000 +0200
@@ -624,9 +624,11 @@ struct b43_wl { @@ -624,9 +624,11 @@ struct b43_wl {
/* Stats about the wireless interface */ /* Stats about the wireless interface */
struct ieee80211_low_level_stats ieee_stats; struct ieee80211_low_level_stats ieee_stats;
@ -21,10 +19,8 @@ Index: compat-wireless-2009-03-24/drivers/net/wireless/b43/b43.h
/* The RF-kill button */ /* The RF-kill button */
struct b43_rfkill rfkill; struct b43_rfkill rfkill;
Index: compat-wireless-2009-03-24/drivers/net/wireless/b43/main.c --- a/drivers/net/wireless/b43/main.c
=================================================================== +++ b/drivers/net/wireless/b43/main.c
--- compat-wireless-2009-03-24.orig/drivers/net/wireless/b43/main.c 2009-03-29 13:27:05.000000000 +0200
+++ compat-wireless-2009-03-24/drivers/net/wireless/b43/main.c 2009-03-29 13:27:21.000000000 +0200
@@ -2982,6 +2982,7 @@ static void b43_security_init(struct b43 @@ -2982,6 +2982,7 @@ static void b43_security_init(struct b43
b43_clear_keys(dev); b43_clear_keys(dev);
} }
@ -64,10 +60,8 @@ Index: compat-wireless-2009-03-24/drivers/net/wireless/b43/main.c
return err; return err;
} }
Index: compat-wireless-2009-03-24/config.mk --- a/config.mk
=================================================================== +++ b/config.mk
--- compat-wireless-2009-03-24.orig/config.mk 2009-03-29 13:28:03.000000000 +0200
+++ compat-wireless-2009-03-24/config.mk 2009-03-29 13:28:32.000000000 +0200
@@ -148,6 +148,7 @@ CONFIG_ATH9K_DEBUG=y @@ -148,6 +148,7 @@ CONFIG_ATH9K_DEBUG=y
# CONFIG_B43_PIO=y # CONFIG_B43_PIO=y
# CONFIG_B43_LEDS=y # CONFIG_B43_LEDS=y

Loading…
Cancel
Save