dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ipq806x: convert ok to okay in dts

Browse Source 
DT spec require okay instead of ok in dts files

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
master
Christian Lamparter 5 years ago committed by Petr Štetiar
parent 63066d3006
commit 9e9fe2392e
12 changed files with 184 additions and 184 deletions
Show Stats Download Patch File Download Diff File

36
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
Unescape Escape View File

@ -89,9 +89,9 @@
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
status = "okay";
serial@16340000 {
status = "ok";
status = "okay";
};
/*
@ -104,10 +104,10 @@
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
status = "okay";
spi4: spi@1a280000 {
status = "ok";
status = "okay";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
@ -130,48 +130,48 @@
};
sata-phy@1b400000 {
status = "ok";
status = "okay";
};
sata@29000000 {
status = "ok";
status = "okay";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
status = "okay";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
status = "okay";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
status = "okay";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
status = "okay";
};
usb30@0 {
status = "ok";
status = "okay";
};
usb30@1 {
status = "ok";
status = "okay";
};
pcie0: pci@1b500000 {
status = "ok";
status = "okay";
};
pcie1: pci@1b700000 {
status = "ok";
status = "okay";
force_gen1 = <1>;
};
nand@1ac00000 {
status = "ok";
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
@ -217,7 +217,7 @@
};
gmac1: ethernet@37200000 {
status = "ok";
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
@ -231,7 +231,7 @@
};
gmac2: ethernet@37400000 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
@ -244,5 +244,5 @@
};
&adm_dma {
status = "ok";
status = "okay";
};

40
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
Unescape Escape View File

@ -92,9 +92,9 @@
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
status = "okay";
serial@16340000 {
status = "ok";
status = "okay";
};
/*
@ -107,10 +107,10 @@
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
status = "okay";
spi4: spi@1a280000 {
status = "ok";
status = "okay";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
@ -133,52 +133,52 @@
};
sata-phy@1b400000 {
status = "ok";
status = "okay";
};
sata@29000000 {
status = "ok";
status = "okay";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
status = "okay";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
status = "okay";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
status = "okay";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
status = "okay";
};
usb30@0 {
status = "ok";
status = "okay";
};
usb30@1 {
status = "ok";
status = "okay";
};
pcie0: pci@1b500000 {
status = "ok";
status = "okay";
};
pcie1: pci@1b700000 {
status = "ok";
status = "okay";
force_gen1 = <1>;
};
pcie2: pci@1b900000 {
status = "ok";
status = "okay";
};
nand@1ac00000 {
status = "ok";
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
@ -232,7 +232,7 @@
};
gmac0: ethernet@37000000 {
status = "ok";
status = "okay";
phy-mode = "rgmii";
qcom,id = <0>;
@ -247,7 +247,7 @@
};
gmac1: ethernet@37200000 {
status = "ok";
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
mdiobus = <&mdio0>;
@ -259,7 +259,7 @@
};
gmac2: ethernet@37400000 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
mdiobus = <&mdio0>;
@ -273,5 +273,5 @@
};
&adm_dma {
status = "ok";
status = "okay";
};

30
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
Unescape Escape View File

@ -133,9 +133,9 @@
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
status = "okay";
serial@16340000 {
status = "ok";
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
@ -147,10 +147,10 @@
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
status = "okay";
spi5: spi@1a280000 {
status = "ok";
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
@ -316,41 +316,41 @@
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
status = "okay";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
status = "okay";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
status = "okay";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
status = "okay";
};
usb30@0 {
status = "ok";
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pin>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pin>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "ok";
status = "okay";
};
pcie1: pci@1b700000 {
status = "ok";
status = "okay";
force_gen1 = <1>;
};
@ -381,7 +381,7 @@
};
gmac1: ethernet@37200000 {
status = "ok";
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
@ -398,7 +398,7 @@
};
gmac2: ethernet@37400000 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
@ -490,5 +490,5 @@
};
&adm_dma {
status = "ok";
status = "okay";
};

32
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
Unescape Escape View File

@ -131,9 +131,9 @@
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
status = "okay";
serial@16340000 {
status = "ok";
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
@ -144,53 +144,53 @@
};
sata-phy@1b400000 {
status = "ok";
status = "okay";
};
sata@29000000 {
ports-implemented = <0x1>;
status = "ok";
status = "okay";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
status = "okay";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
status = "okay";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
status = "okay";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
status = "okay";
};
usb30@0 {
status = "ok";
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "ok";
status = "okay";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "ok";
status = "okay";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
@ -198,7 +198,7 @@
};
nand@1ac00000 {
status = "ok";
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
@ -301,7 +301,7 @@
};
gmac1: ethernet@37200000 {
status = "ok";
status = "okay";
phy-mode = "rgmii";
phy-handle = <&phy4>;
qcom,id = <1>;
@ -313,7 +313,7 @@
};
gmac2: ethernet@37400000 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
@ -404,5 +404,5 @@
};
&adm_dma {
status = "ok";
status = "okay";
};

38
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
Unescape Escape View File

@ -60,18 +60,18 @@
gsbi2: gsbi@12480000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
status = "okay";
uart2: serial@12490000 {
status = "ok";
status = "okay";
};
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
status = "okay";
spi4: spi@1a280000 {
status = "ok";
status = "okay";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
@ -116,47 +116,47 @@
};
sata-phy@1b400000 {
status = "ok";
status = "okay";
};
sata@29000000 {
status = "ok";
status = "okay";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
status = "okay";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
status = "okay";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
status = "okay";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
status = "okay";
};
usb30@0 {
status = "ok";
status = "okay";
};
usb30@1 {
status = "ok";
status = "okay";
};
pcie0: pci@1b500000 {
status = "ok";
status = "okay";
};
pcie1: pci@1b700000 {
status = "ok";
status = "okay";
};
pcie2: pci@1b900000 {
status = "ok";
status = "okay";
};
mdio0: mdio {
@ -195,7 +195,7 @@
};
gmac0: ethernet@37000000 {
status = "ok";
status = "okay";
phy-mode = "rgmii";
qcom,id = <0>;
phy-handle = <&phy4>;
@ -205,7 +205,7 @@
};
gmac1: ethernet@37200000 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <1>;
@ -216,14 +216,14 @@
};
gmac2: ethernet@37400000 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
phy-handle = <&phy6>;
};
gmac3: ethernet@37600000 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <3>;
phy-handle = <&phy7>;

34
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
Unescape Escape View File

@ -111,9 +111,9 @@
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
status = "okay";
serial@16340000 {
status = "ok";
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
@ -124,52 +124,52 @@
};
sata-phy@1b400000 {
status = "ok";
status = "okay";
};
sata@29000000 {
status = "ok";
status = "okay";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
status = "okay";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
status = "okay";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
status = "okay";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
status = "okay";
};
usb30@0 {
status = "ok";
status = "okay";
};
usb30@1 {
status = "ok";
status = "okay";
};
pcie0: pci@1b500000 {
status = "ok";
status = "okay";
force_gen1 = <1>;
};
pcie1: pci@1b700000 {
status = "ok";
status = "okay";
};
pcie2: pci@1b900000 {
status = "ok";
status = "okay";
};
nand@1ac00000 {
status = "ok";
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
@ -317,7 +317,7 @@
};
gmac1: ethernet@37200000 {
status = "ok";
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
qcom,phy_mdio_addr = <4>;
@ -333,7 +333,7 @@
};
//lan
gmac2: ethernet@37400000 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
qcom,phy_mdio_addr = <0>; /* none */
@ -347,7 +347,7 @@
};
adm_dma: dma@18300000 {
status = "ok";
status = "okay";
};
};

32
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
Unescape Escape View File

@ -112,9 +112,9 @@
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
status = "okay";
serial@16340000 {
status = "ok";
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
@ -125,54 +125,54 @@
};
sata-phy@1b400000 {
status = "ok";
status = "okay";
};
sata@29000000 {
status = "ok";
status = "okay";
};
phy@100f8800 { /* USB3 port 1 HS phy */
clocks = <&gcc USB30_0_UTMI_CLK>;
status = "ok";
status = "okay";
};
phy@100f8830 { /* USB3 port 1 SS phy */
clocks = <&gcc USB30_0_MASTER_CLK>;
status = "ok";
status = "okay";
};
phy@110f8800 { /* USB3 port 0 HS phy */
clocks = <&gcc USB30_1_UTMI_CLK>;
status = "ok";
status = "okay";
};
phy@110f8830 { /* USB3 port 0 SS phy */
clocks = <&gcc USB30_1_MASTER_CLK>;
status = "ok";
status = "okay";
};
usb30@0 {
clocks = <&gcc USB30_1_MASTER_CLK>;
status = "ok";
status = "okay";
};
usb30@1 {
clocks = <&gcc USB30_0_MASTER_CLK>;
status = "ok";
status = "okay";
};
pcie0: pci@1b500000 {
status = "ok";
status = "okay";
};
pcie1: pci@1b700000 {
status = "ok";
status = "okay";
force_gen1 = <1>;
};
nand@1ac00000 {
status = "ok";
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
@ -266,7 +266,7 @@
};
gmac1: ethernet@37200000 {
status = "ok";
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
@ -282,7 +282,7 @@
};
gmac2: ethernet@37400000 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
@ -378,5 +378,5 @@
};
&adm_dma {
status = "ok";
status = "okay";
};

32
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
Unescape Escape View File

@ -136,9 +136,9 @@
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
status = "okay";
serial@16340000 {
status = "ok";
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
@ -149,52 +149,52 @@
};
sata-phy@1b400000 {
status = "ok";
status = "okay";
};
sata@29000000 {
status = "ok";
status = "okay";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
status = "okay";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
status = "okay";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
status = "okay";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
status = "okay";
};
usb30@0 {
status = "ok";
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "ok";
status = "okay";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "ok";
status = "okay";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
@ -202,7 +202,7 @@
};
nand@1ac00000 {
status = "ok";
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
@ -296,7 +296,7 @@
};
gmac1: ethernet@37200000 {
status = "ok";
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
@ -312,7 +312,7 @@
};
gmac2: ethernet@37400000 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
@ -403,5 +403,5 @@
};
&adm_dma {
status = "ok";
status = "okay";
};

30
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
Unescape Escape View File

@ -111,9 +111,9 @@
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
status = "okay";
serial@16340000 {
status = "ok";
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
@ -125,10 +125,10 @@
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
status = "okay";
spi4: spi@1a280000 {
status = "ok";
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
@ -234,35 +234,35 @@
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
status = "okay";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
status = "okay";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
status = "okay";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
status = "okay";
};
usb30@0 {
status = "ok";
status = "okay";
};
usb30@1 {
status = "ok";
status = "okay";
};
pcie0: pci@1b500000 {
status = "ok";
status = "okay";
};
pcie1: pci@1b700000 {
status = "ok";
status = "okay";
force_gen1 = <1>;
};
@ -293,7 +293,7 @@
};
gmac1: ethernet@37200000 {
status = "ok";
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
@ -310,7 +310,7 @@
};
gmac2: ethernet@37400000 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
@ -413,5 +413,5 @@
};
&adm_dma {
status = "ok";
status = "okay";
};

2
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
Unescape Escape View File

@ -240,7 +240,7 @@
};
&gmac2 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;

30
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
Unescape Escape View File

@ -151,9 +151,9 @@
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
status = "okay";
serial@16340000 {
status = "ok";
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
@ -165,10 +165,10 @@
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
status = "okay";
spi4: spi@1a280000 {
status = "ok";
status = "okay";
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
@ -190,44 +190,44 @@
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
status = "okay";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
status = "okay";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
status = "okay";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
status = "okay";
};
usb30@0 {
status = "ok";
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "ok";
status = "okay";
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie0_pins>;
pinctrl-names = "default";
};
pcie1: pci@1b700000 {
status = "ok";
status = "okay";
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie1_pins>;
pinctrl-names = "default";
@ -279,7 +279,7 @@
};
gmac1: ethernet@37200000 {
status = "ok";
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
qcom,phy_mdio_addr = <4>;
@ -300,7 +300,7 @@
};
gmac2: ethernet@37400000 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
qcom,phy_mdio_addr = <0>; /* none */
@ -382,5 +382,5 @@
};
&adm_dma {
status = "ok";
status = "okay";
};

32
target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
Unescape Escape View File

@ -204,9 +204,9 @@
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
status = "okay";
serial@16340000 {
status = "ok";
status = "okay";
};
/*
* The i2c device on gsbi4 should not be enabled.
@ -217,55 +217,55 @@
};
sata-phy@1b400000 {
status = "ok";
status = "okay";
};
sata@29000000 {
ports-implemented = <0x1>;
status = "ok";
status = "okay";
};
phy@100f8800 { /* USB3 port 1 HS phy */
status = "ok";
status = "okay";
};
phy@100f8830 { /* USB3 port 1 SS phy */
status = "ok";
status = "okay";
};
phy@110f8800 { /* USB3 port 0 HS phy */
status = "ok";
status = "okay";
};
phy@110f8830 { /* USB3 port 0 SS phy */
status = "ok";
status = "okay";
};
usb30@0 {
status = "ok";
status = "okay";
pinctrl-0 = <&usb0_pwr_en_pins>;
pinctrl-names = "default";
};
usb30@1 {
status = "ok";
status = "okay";
pinctrl-0 = <&usb1_pwr_en_pins>;
pinctrl-names = "default";
};
pcie0: pci@1b500000 {
status = "ok";
status = "okay";
};
pcie1: pci@1b700000 {
status = "ok";
status = "okay";
force_gen1 = <1>;
};
nand@1ac00000 {
status = "ok";
status = "okay";
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
@ -382,7 +382,7 @@
};
gmac1: ethernet@37200000 {
status = "ok";
status = "okay";
phy-mode = "rgmii";
qcom,id = <1>;
qcom,phy_mdio_addr = <4>;
@ -405,7 +405,7 @@
};
gmac2: ethernet@37400000 {
status = "ok";
status = "okay";
phy-mode = "sgmii";
qcom,id = <2>;
qcom,phy_mdio_addr = <0>; /* none */
@ -509,5 +509,5 @@
};
&adm_dma {
status = "ok";
status = "okay";
};

Write Preview
Loading…
Cancel
Save