ar71xx: cosmetic fix of alfa ap120c/ap96 ordering

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49086

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -348,12 +348,12 @@ ar71xx_board_detect() {
 	*"AirRouter")
 		name="airrouter"
 		;;
-	*"ALFA Network AP96")
-		name="alfa-ap96"
-		;;
 	*"ALFA Network AP120C")
 		name="alfa-ap120c"
 		;;
+	*"ALFA Network AP96")
+		name="alfa-ap96"
+		;;
 	*"ALFA Network N2/N5")
 		name="alfa-nx"
 		;;

target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt

@@ -1,11 +1,3 @@
-config ATH79_MACH_ALFA_AP96
-	bool "ALFA Network AP96 board support"
-	select SOC_AR71XX
-	select ATH79_DEV_ETH
-	select ATH79_DEV_GPIO_BUTTONS
-	select ATH79_DEV_M25P80
-	select ATH79_DEV_USB
-
 config ATH79_MACH_ALFA_AP120C
 	bool "ALFA Network AP120C board support"
 	select ATH79_DEV_AP9X_PCI if PCI
@@ -14,6 +6,14 @@ config ATH79_MACH_ALFA_AP120C
 	select ATH79_DEV_M25P80
 	select ATH79_DEV_WMAC
 
+config ATH79_MACH_ALFA_AP96
+	bool "ALFA Network AP96 board support"
+	select SOC_AR71XX
+	select ATH79_DEV_ETH
+	select ATH79_DEV_GPIO_BUTTONS
+	select ATH79_DEV_M25P80
+	select ATH79_DEV_USB
+
 config ATH79_MACH_HORNET_UB
 	bool "ALFA Network Hornet-UB board support"
 	select SOC_AR933X

target/linux/ar71xx/files/arch/mips/ath79/Makefile

@@ -38,8 +38,8 @@ obj-$(CONFIG_ATH79_ROUTERBOOT)		+= routerboot.o
 #
 # Machines
 #
-obj-$(CONFIG_ATH79_MACH_ALFA_AP96)	+= mach-alfa-ap96.o
 obj-$(CONFIG_ATH79_MACH_ALFA_AP120C)	+= mach-alfa-ap120c.o
+obj-$(CONFIG_ATH79_MACH_ALFA_AP96)	+= mach-alfa-ap96.o
 obj-$(CONFIG_ATH79_MACH_ALFA_NX)	+= mach-alfa-nx.o
 obj-$(CONFIG_ATH79_MACH_ALL0258N)	+= mach-all0258n.o
 obj-$(CONFIG_ATH79_MACH_ALL0315N)	+= mach-all0315n.o

target/linux/ar71xx/files/arch/mips/ath79/machtypes.h

@@ -17,8 +17,8 @@
 enum ath79_mach_type {
 	ATH79_MACH_GENERIC_OF = -1,	/* Device tree board */
 	ATH79_MACH_GENERIC = 0,
+	ATH79_MACH_ALFA_AP120C,		/* ALFA Network AP120C board */
 	ATH79_MACH_ALFA_AP96,		/* ALFA Network AP96 board */
-	ATH79_MACH_ALFA_AP120C,         /* ALFA Network AP120 board */
 	ATH79_MACH_ALFA_NX,		/* ALFA Network N2/N5 board */
 	ATH79_MACH_ALL0258N,		/* Allnet ALL0258N */
 	ATH79_MACH_ALL0305,		/* Allnet ALL0305 */

target/linux/ar71xx/image/Makefile

@@ -1556,8 +1556,8 @@ define Build/Clean
 	$(LOADER_MAKE) clean
 endef
 
-alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware)
 alfa_ap120c_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,13312k(rootfs),1536k(kernel),1152k(unknown)ro,64k(art)ro;spi0.1:-(unknown)
+alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware)
 alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
 alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro
 all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art)
@@ -2357,8 +2357,8 @@ $(eval $(call SingleProfile,AthGzip,64k,AP83,ap83,AP83,ttyS0,115200,$$(ap83_mtdl
 $(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage))
 $(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage))
 
-$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage))
 $(eval $(call SingleProfile,AthLzma,64k,ALFAAP120C,alfa-ap120c,ALFA-AP120C,ttyS0,115200,$$(alfa_ap120c_mtdlayout),RKuImage))
+$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage))
 $(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536))
 $(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144))
 $(eval $(call SingleProfile,AthLzma,64k,AP113,ap113,AP113,ttyS0,115200,$$(ap113_mtd_layout),RK))