@ -46,8 +46,10 @@
};
watchdog@803f0 {
compatible = "lantiq,wdt";
compatible = "lantiq,xrx100-wdt", "lantiq,xrx100- wdt";
reg = <0x803f0 0x10>;
regmap = <&rcu0>;
};
};
@ -91,25 +93,81 @@
};
rcu0: rcu@203000 {
compatible = "lantiq,rcu-xrx200";
reg = <0x203000 0x1000>;
/* irq for thermal sensor */
interrupt-parent = <&icu0>;
interrupts = <115>;
compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
reg = <0x203000 0x100>;
ranges = <0x0 0x203000 0x100>;
big-endian;
gphy0: gphy@20 {
compatible = "lantiq,xrx200-gphy";
reg = <0x20 0x4>;
resets = <&reset0 31 30>, <&reset1 7 7>;
reset-names = "gphy", "gphy2";
};
gphy1: gphy@68 {
compatible = "lantiq,xrx200-gphy";
reg = <0x68 0x4>;
resets = <&reset0 29 28>, <&reset1 6 6>;
reset-names = "gphy", "gphy2";
};
reset0: reset-controller@10 {
compatible = "lantiq,xrx200-reset";
reg = <0x10 4>, <0x14 4>;
#reset-cells = <2>;
};
reset1: reset-controller@48 {
compatible = "lantiq,xrx200-reset";
reg = <0x48 4>, <0x24 4>;
#reset-cells = <2>;
};
usb_phy0: usb2-phy@18 {
compatible = "lantiq,xrx200-usb2-phy";
reg = <0x18 4>, <0x38 4>;
status = "disabled";
resets = <&reset1 4 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";
#phy-cells = <0>;
};
usb_phy1: usb2-phy@34 {
compatible = "lantiq,xrx200-usb2-phy";
reg = <0x34 4>, <0x3c 4>;
status = "disabled";
resets = <&reset1 5 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";
#phy-cells = <0>;
};
xbar0: xbar@400000 {
compatible = "lantiq,xbar-xway";
reg = <0x400000 0x1000>;
reboot@10 {
compatible = "syscon-reboot";
reg = <0x10 4>;
regmap = <&rcu0>;
offset = <0x10>;
mask = <0x40000000>;
};
};
};
fpi@10000000 {
compatible = "lantiq,xrx200-fpi", "simple-bus";
ranges = <0x0 0x10000000 0xf000000>;
reg = <0x1f400000 0x1000>,
<0x10000000 0xf000000>;
regmap = <&rcu0>;
offset-endianness = <0x4c>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "lantiq,fpi", "simple-bus";
ranges = <0x0 0x10000000 0xeefffff>;
reg = <0x10000000 0xef00000>;
localbus: localbus@0 {
#address-cells = <2>;
@ -191,12 +249,14 @@
usb0: usb@e101000 {
status = "disabled";
compatible = "lantiq,xrx200-usb", "lantiq,ifxhcd-xrx200" ;
compatible = "lantiq,xrx200-usb";
reg = <0xe101000 0x1000
0xe120000 0x3f000>;
interrupt-parent = <&icu0>;
interrupts = <62 91>;
dr_mode = "host";
phys = <&usb_phy0>;
phy-names = "usb2-phy";
};
usb1: usb@e106000 {
@ -206,6 +266,8 @@
interrupt-parent = <&icu0>;
interrupts = <91>;
dr_mode = "host";
phys = <&usb_phy1>;
phy-names = "usb2-phy";
};
eth0: eth@e108000 {
@ -219,6 +281,9 @@
>;
interrupt-parent = <&icu0>;
interrupts = <75 73 72>;
resets = <&reset0 21 16>, <&reset0 8 8>;
reset-names = "switch", "ppe";
lantiq,phys = <&gphy0>, <&gphy1>;
};
mei@e116000 {