kirkwood: fix switch dts node in EA4500 and EA3500

Changes made in switch nodes in d42c9ce commit causes problem with
correct mvsw61xx detection. This commit undo that changes.

mvsw61xx is platform driver, so it need to be in main root of dts.

Fixes: d42c9ce326 ("kirkwood: add kernel 4.19 support")

Tested-by: Marcin Fedan <mfedan@gmail.com> [EA4500]
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

target/linux/kirkwood/files-4.19/arch/arm/boot/dts/kirkwood-linksys-audi.dts

@@ -67,65 +67,15 @@
 		};
 	};
 
-	switches {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mvsw61xx@10 {
-			compatible = "marvell,88e6171";
-			status = "okay";
-			reg = <0x10>;
-
-			mii-bus = <&mdio>;
-			cpu-port-0 = <5>;
-			cpu-port-1 = <6>;
-			is-indirect;
-		};
-	};
-
-	dsa {
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		dsa,ethernet = <&eth0port>;
-		dsa,mii-bus = <&mdio>;
-
-		switch@16,0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <16 0>;	/* MDIO address 16, switch 0 in tree */
-
-			port@0 {
-				reg = <0>;
-				label = "ethernet1";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "ethernet2";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "ethernet3";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "ethernet4";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "internet";
-			};
-
-			port@5 {
-				reg = <5>;
-				label = "cpu";
-			};
-		};
+	mvsw61xx {
+		compatible = "marvell,88e6171";
+		status = "okay";
+		reg = <0x10>;
+
+		mii-bus = <&mdio>;
+		cpu-port-0 = <5>;
+		cpu-port-1 = <6>;
+		is-indirect;
 	};
 };
 

target/linux/kirkwood/patches-4.19/105-ea4500.patch

@@ -23,33 +23,28 @@
  		};
  
  		white-pulse {
-@@ -67,9 +72,23 @@
+@@ -67,9 +72,18 @@
  		};
  	};
  
 -	dsa {
 -		status = "disabled";
-+	switches {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
- 
-+		mvsw61xx@10 {
-+			compatible = "marvell,88e6171";
-+			status = "okay";
-+			reg = <0x10>;
++	mvsw61xx {
++		compatible = "marvell,88e6171";
++		status = "okay";
++		reg = <0x10>;
 +
-+			mii-bus = <&mdio>;
-+			cpu-port-0 = <5>;
-+			cpu-port-1 = <6>;
-+			is-indirect;
-+		};
++		mii-bus = <&mdio>;
++		cpu-port-0 = <5>;
++		cpu-port-1 = <6>;
++		is-indirect;
 +	};
-+
+ 
 +	dsa {
  		compatible = "marvell,dsa";
  		#address-cells = <2>;
  		#size-cells = <0>;
-@@ -161,22 +180,22 @@
+@@ -161,22 +175,22 @@
  		};
  
  		partition@200000 {
@@ -76,7 +71,7 @@
  			reg = <0x1EA0000 0x1760000>;
  		};
  
-@@ -207,53 +226,6 @@
+@@ -207,53 +221,6 @@
  
  &mdio {
  	status = "okay";
@@ -130,7 +125,7 @@
  };
  
  &uart0 {
-@@ -272,10 +244,14 @@
+@@ -272,10 +239,14 @@
  };
  
  /* eth1 is connected to the switch at port 6. However DSA only supports a