kirkwood: initial refresh of 5.4 patches

Refreshed all patches.
Changed:
105-ea4500.patch-> Upstream DSA driver was updated. Patch was fixed
202-linksys-find-active-root.patch -> Upstream driver was moved. Patch
was fixed

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

target/linux/kirkwood/patches-5.4/105-ea4500.patch

@@ -23,13 +23,12 @@
  		};
  
  		white-pulse {
-@@ -67,9 +72,18 @@
+@@ -66,6 +71,17 @@
+ 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
  		};
  	};
- 
--	dsa {
--		status = "disabled";
-+	mvsw61xx {
++
++	mvsw61xx@10 {
 +		compatible = "marvell,88e6171";
 +		status = "okay";
 +		reg = <0x10>;
@@ -39,12 +38,10 @@
 +		cpu-port-1 = <6>;
 +		is-indirect;
 +	};
+ };
  
-+	dsa {
- 		compatible = "marvell,dsa";
- 		#address-cells = <2>;
- 		#size-cells = <0>;
-@@ -161,22 +175,22 @@
+ &pinctrl {
+@@ -114,22 +130,22 @@
  		};
  
  		partition@200000 {
@@ -71,61 +68,15 @@
  			reg = <0x1EA0000 0x1760000>;
  		};
  
-@@ -207,53 +221,6 @@
- 
- &mdio {
+@@ -162,6 +178,7 @@
  	status = "okay";
--
--	switch@10 {
--		compatible = "marvell,mv88e6085";
--		#address-cells = <1>;
--		#size-cells = <0>;
--		reg = <16>;
--
--		ports {
--			#address-cells = <1>;
--			#size-cells = <0>;
--
--			port@0 {
--				reg = <0>;
--				label = "ethernet1";
--			};
--
--			port@1 {
--				reg = <1>;
--				label = "ethernet2";
--			};
--
--			port@2 {
--				reg = <2>;
--				label = "ethernet3";
--			};
--
--			port@3 {
--				reg = <3>;
--				label = "ethernet4";
--			};
--
--			port@4 {
--				reg = <4>;
--				label = "internet";
--			};
--
--			port@5 {
--				reg = <5>;
--				label = "cpu";
--				ethernet = <&eth0port>;
--				fixed-link {
--					speed = <1000>;
--					full-duplex;
--				};
--			};
--		};
--	};
- };
  
- &uart0 {
-@@ -272,10 +239,14 @@
+ 	switch@10 {
++		status = "disabled";
+ 		compatible = "marvell,mv88e6085";
+ 		#address-cells = <1>;
+ 		#size-cells = <0>;
+@@ -225,10 +242,14 @@
  };
  
  /* eth1 is connected to the switch at port 6. However DSA only supports a

target/linux/kirkwood/patches-5.4/201-enable-sata-port-specific-led-triggers.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/mach-mvebu/Kconfig
 +++ b/arch/arm/mach-mvebu/Kconfig
-@@ -118,6 +118,7 @@ config MACH_DOVE
+@@ -119,6 +119,7 @@ config MACH_DOVE
  config MACH_KIRKWOOD
  	bool "Marvell Kirkwood boards"
  	depends on ARCH_MULTI_V5

target/linux/kirkwood/patches-5.4/202-linksys-find-active-root.patch

@@ -3,9 +3,9 @@ Dynamically rename the active partition to "ubi".
 
 Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
 ---
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d
+--- a/drivers/mtd/parsers/ofpart.c
++++ b/drivers/mtd/parsers/ofpart.c
+@@ -21,6 +21,8 @@ static bool node_has_compatible(struct d
  	return of_get_property(pp, "compatible", NULL);
  }
  
@@ -14,7 +14,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
  static int parse_fixed_partitions(struct mtd_info *master,
  				  const struct mtd_partition **pparts,
  				  struct mtd_part_parser_data *data)
-@@ -32,6 +34,7 @@ static int parse_fixed_partitions(struct
+@@ -28,6 +30,7 @@ static int parse_fixed_partitions(struct
  	struct mtd_partition *parts;
  	struct device_node *mtd_node;
  	struct device_node *ofpart_node;
@@ -22,7 +22,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
  	const char *partname;
  	struct device_node *pp;
  	int nr_parts, i, ret = 0;
-@@ -110,9 +113,15 @@ static int parse_fixed_partitions(struct
+@@ -106,9 +109,15 @@ static int parse_fixed_partitions(struct
  		parts[i].size = of_read_number(reg + a_cells, s_cells);
  		parts[i].of_node = pp;
  
@@ -41,7 +41,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
  		parts[i].name = partname;
  
  		if (of_get_property(pp, "read-only", &len))
-@@ -219,6 +228,18 @@ static int __init ofpart_parser_init(voi
+@@ -215,6 +224,18 @@ static int __init ofpart_parser_init(voi
  	return 0;
  }