lantiq: split base-files into subtargets
This splits the device-dependent base-files into subtarget directories, like done recently for ath79 and ramips. While this increases the overall lines of codes, it will make the code per subtarget smaller and easier to keep track of features and devices. While at it, several variables at the top of 02_network are removed, as they were never changed. The values are put directly into the function calls where they are used. Remove unneeded LED setup from 01_leds, and remove 01_leds entirely for falcon subtarget (as it is not used there). Applies alphabetic reordering to device cases in base-files. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>master
Adrian Schmutzler
4 years ago
parent
b070101c50
commit
355f0444f3
@ -0,0 +1,32 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/leds.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
led_dsl="$(get_dt_led dsl)"
|
||||
[ -n "$led_dsl" ] && {
|
||||
led_internet="$(get_dt_led internet)"
|
||||
if [ -n "$led_internet" ]; then
|
||||
ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
|
||||
ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
|
||||
else
|
||||
ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
|
||||
fi
|
||||
}
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
allnet,all0333cj)
|
||||
ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@ -0,0 +1,52 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/lantiq.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
annex="a"
|
||||
|
||||
lan_mac=""
|
||||
wan_mac=""
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
allnet,all0333cj)
|
||||
annex="b"
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
netgear,dgn1000b)
|
||||
annex="b"
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
*)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
esac
|
||||
|
||||
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
|
||||
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
|
||||
|
||||
if lantiq_is_vdsl_system; then
|
||||
ucidef_add_vdsl_modem "$annex" "av"
|
||||
else
|
||||
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
|
||||
fi
|
||||
|
||||
ucidef_set_interface_wan "dsl0" "pppoe"
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
|
||||
@ -0,0 +1,10 @@
|
||||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
platform_check_image() {
|
||||
return 0
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
default_do_upgrade "$1"
|
||||
}
|
||||
@ -0,0 +1,36 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/lantiq.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
annex="a"
|
||||
|
||||
lan_mac=""
|
||||
wan_mac=""
|
||||
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
|
||||
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
|
||||
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
|
||||
|
||||
if lantiq_is_vdsl_system; then
|
||||
ucidef_add_vdsl_modem "$annex" "av"
|
||||
else
|
||||
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
|
||||
fi
|
||||
|
||||
ucidef_set_interface_wan "dsl0" "pppoe"
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
|
||||
@ -0,0 +1,10 @@
|
||||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
platform_check_image() {
|
||||
return 0
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
default_do_upgrade "$1"
|
||||
}
|
||||
@ -1,5 +1,4 @@
|
||||
#!/bin/sh
|
||||
# Based on ar71xx 11-ath10k-caldata and 10-rt2x00-eeprom
|
||||
|
||||
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
||||
|
||||
@ -0,0 +1,38 @@
|
||||
#!/bin/sh
|
||||
|
||||
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
||||
|
||||
. /lib/functions/caldata.sh
|
||||
|
||||
case "$FIRMWARE" in
|
||||
"ath9k-eeprom-pci-0000:00:0e.0.bin" | \
|
||||
"ath9k-eeprom-pci-0000:01:00.0.bin" | \
|
||||
"ath9k-eeprom-pci-0000:02:00.0.bin")
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
avm,fritz3370-rev2-hynix|\
|
||||
avm,fritz3370-rev2-micron|\
|
||||
avm,fritz7362sl)
|
||||
caldata_extract_reverse "urlader" 0x1541 0x440
|
||||
;;
|
||||
avm,fritz7360sl)
|
||||
caldata_extract "urlader" 0x985 0x1000
|
||||
;;
|
||||
avm,fritz7412)
|
||||
/usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader")
|
||||
;;
|
||||
bt,homehub-v5a)
|
||||
caldata_extract_ubi "caldata" 0x1000 0x1000
|
||||
ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 0x10c
|
||||
;;
|
||||
tplink,tdw8970|\
|
||||
tplink,tdw8980)
|
||||
caldata_extract "boardconfig" 0x21000 0x1000
|
||||
;;
|
||||
*)
|
||||
caldata_die "board $board is not supported yet"
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
@ -0,0 +1,44 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/leds.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
led_wifi="$(get_dt_led wifi)"
|
||||
[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
|
||||
|
||||
led_usb="$(get_dt_led usb)"
|
||||
[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1"
|
||||
|
||||
led_usb2="$(get_dt_led usb2)"
|
||||
[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1"
|
||||
|
||||
led_dsl="$(get_dt_led dsl)"
|
||||
[ -n "$led_dsl" ] && {
|
||||
led_internet="$(get_dt_led internet)"
|
||||
if [ -n "$led_internet" ]; then
|
||||
ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
|
||||
ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
|
||||
else
|
||||
ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
|
||||
fi
|
||||
}
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
arcadyan,arv7506pw11)
|
||||
ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio"
|
||||
;;
|
||||
arcadyan,arv752dpw22)
|
||||
ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@ -0,0 +1,122 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/lantiq.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
annex="a"
|
||||
|
||||
lan_mac=""
|
||||
wan_mac=""
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
arcadyan,arv4510pw)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
|
||||
;;
|
||||
arcadyan,arv4519pw|\
|
||||
arcadyan,arv7510pw22|\
|
||||
arcadyan,arv7518pw)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
||||
;;
|
||||
arcadyan,arv7506pw11)
|
||||
annex="b"
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
||||
;;
|
||||
arcadyan,arv7519pw)
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
||||
;;
|
||||
arcadyan,arv7525pw|\
|
||||
arcadyan,arv752dpw)
|
||||
annex="b"
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
arcadyan,arv752dpw22|\
|
||||
arcadyan,arv8539pw22)
|
||||
annex="b"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
||||
;;
|
||||
audiocodes,mp-252)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
||||
;;
|
||||
avm,fritz7312|\
|
||||
avm,fritz7320)
|
||||
annex="b"
|
||||
wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
bt,homehub-v2b)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
|
||||
;;
|
||||
bt,homehub-v3a)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
buffalo,wbmr-hp-g300h)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
|
||||
;;
|
||||
netgear,dgn3500|\
|
||||
netgear,dgn3500b)
|
||||
lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
|
||||
wan_mac=$(macaddr_add "$lan_mac" 1)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
||||
;;
|
||||
siemens,gigaset-sx76x)
|
||||
annex="b"
|
||||
ucidef_add_switch "switch0" \
|
||||
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
|
||||
;;
|
||||
zte,h201l)
|
||||
annex="b"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
|
||||
;;
|
||||
zyxel,p-2601hn)
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
|
||||
;;
|
||||
*)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
esac
|
||||
|
||||
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
|
||||
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
|
||||
|
||||
if lantiq_is_vdsl_system; then
|
||||
ucidef_add_vdsl_modem "$annex" "av"
|
||||
else
|
||||
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
|
||||
fi
|
||||
|
||||
ucidef_set_interface_wan "dsl0" "pppoe"
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
|
||||
@ -0,0 +1,20 @@
|
||||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
platform_check_image() {
|
||||
return 0
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
local board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
bt,homehub-v2b|\
|
||||
bt,homehub-v3a)
|
||||
nand_do_upgrade $1
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
@ -0,0 +1,41 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/leds.sh
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
led_wifi="$(get_dt_led wifi)"
|
||||
[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
|
||||
|
||||
led_usb="$(get_dt_led usb)"
|
||||
[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1"
|
||||
|
||||
led_usb2="$(get_dt_led usb2)"
|
||||
[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1"
|
||||
|
||||
led_dsl="$(get_dt_led dsl)"
|
||||
[ -n "$led_dsl" ] && {
|
||||
led_internet="$(get_dt_led internet)"
|
||||
if [ -n "$led_internet" ]; then
|
||||
ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
|
||||
ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
|
||||
else
|
||||
ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
|
||||
fi
|
||||
}
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
arcadyan,arv4525pw)
|
||||
ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
@ -0,0 +1,52 @@
|
||||
#!/bin/sh
|
||||
#
|
||||
# Copyright (C) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
. /lib/functions/lantiq.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
annex="a"
|
||||
|
||||
lan_mac=""
|
||||
wan_mac=""
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
arcadyan,arv4520pw)
|
||||
annex="b"
|
||||
ucidef_add_switch "switch0" \
|
||||
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
|
||||
;;
|
||||
arcadyan,arv4525pw|\
|
||||
arcadyan,arv452cqw)
|
||||
annex="b"
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
*)
|
||||
ucidef_set_interface_lan 'eth0'
|
||||
;;
|
||||
esac
|
||||
|
||||
ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
|
||||
ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
|
||||
|
||||
if lantiq_is_vdsl_system; then
|
||||
ucidef_add_vdsl_modem "$annex" "av"
|
||||
else
|
||||
ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
|
||||
fi
|
||||
|
||||
ucidef_set_interface_wan "dsl0" "pppoe"
|
||||
|
||||
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
|
||||
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
|
||||
@ -0,0 +1,10 @@
|
||||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
platform_check_image() {
|
||||
return 0
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
default_do_upgrade "$1"
|
||||
}
|
||||
Loading…
Reference in New Issue