diff --git a/target/linux/lantiq/ase/base-files/etc/board.d/01_leds b/target/linux/lantiq/ase/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..6a8de7d7a5
--- /dev/null
+++ b/target/linux/lantiq/ase/base-files/etc/board.d/01_leds
@@ -0,0 +1,32 @@
+#!/bin/sh
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+led_dsl="$(get_dt_led dsl)"
+[ -n "$led_dsl" ] && {
+	led_internet="$(get_dt_led internet)"
+	if [ -n "$led_internet" ]; then
+		ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
+		ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
+	else
+		ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
+	fi
+}
+
+board=$(board_name)
+
+case "$board" in
+allnet,all0333cj)
+	ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
+	;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/lantiq/ase/base-files/etc/board.d/02_network b/target/linux/lantiq/ase/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..d37e999243
--- /dev/null
+++ b/target/linux/lantiq/ase/base-files/etc/board.d/02_network
@@ -0,0 +1,52 @@
+#!/bin/sh
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+. /lib/functions/lantiq.sh
+
+board_config_update
+
+annex="a"
+
+lan_mac=""
+wan_mac=""
+
+board=$(board_name)
+
+case "$board" in
+allnet,all0333cj)
+	annex="b"
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_set_interface_lan 'eth0'
+	;;
+netgear,dgn1000b)
+	annex="b"
+	ucidef_set_interface_lan 'eth0'
+	;;
+*)
+	ucidef_set_interface_lan 'eth0'
+	;;
+esac
+
+ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
+	ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
+
+if lantiq_is_vdsl_system; then
+	ucidef_add_vdsl_modem "$annex" "av"
+else
+	ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
+fi
+
+ucidef_set_interface_wan "dsl0" "pppoe"
+
+[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
+[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
+
+board_config_flush
+
+exit 0
+
diff --git a/target/linux/lantiq/ase/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/ase/base-files/lib/upgrade/platform.sh
new file mode 100755
index 0000000000..d088601bb0
--- /dev/null
+++ b/target/linux/lantiq/ase/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,10 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+	return 0
+}
+
+platform_do_upgrade() {
+	default_do_upgrade "$1"
+}
diff --git a/target/linux/lantiq/falcon/base-files/etc/board.d/02_network b/target/linux/lantiq/falcon/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..76f134d6d4
--- /dev/null
+++ b/target/linux/lantiq/falcon/base-files/etc/board.d/02_network
@@ -0,0 +1,36 @@
+#!/bin/sh
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+. /lib/functions/lantiq.sh
+
+board_config_update
+
+annex="a"
+
+lan_mac=""
+wan_mac=""
+
+ucidef_set_interface_lan 'eth0'
+
+ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
+	ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
+
+if lantiq_is_vdsl_system; then
+	ucidef_add_vdsl_modem "$annex" "av"
+else
+	ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
+fi
+
+ucidef_set_interface_wan "dsl0" "pppoe"
+
+[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
+[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
+
+board_config_flush
+
+exit 0
+
diff --git a/target/linux/lantiq/falcon/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/falcon/base-files/lib/upgrade/platform.sh
new file mode 100755
index 0000000000..d088601bb0
--- /dev/null
+++ b/target/linux/lantiq/falcon/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,10 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+	return 0
+}
+
+platform_do_upgrade() {
+	default_do_upgrade "$1"
+}
diff --git a/target/linux/lantiq/base-files/etc/board.d/01_leds b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds
similarity index 83%
rename from target/linux/lantiq/base-files/etc/board.d/01_leds
rename to target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds
index e89de97fbe..b4d26d37ff 100755
--- a/target/linux/lantiq/base-files/etc/board.d/01_leds
+++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/01_leds
@@ -1,7 +1,6 @@
 #!/bin/sh
 #
 # Copyright (C) 2011-2015 OpenWrt.org
-# based on ar71xx
 #
 
 . /lib/functions/leds.sh
@@ -32,35 +31,9 @@ led_dsl="$(get_dt_led dsl)"
 board=$(board_name)
 
 case "$board" in
-allnet,all0333cj)
-	ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
-	;;
-arcadyan,arv4525pw)
-	ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
-	;;
-arcadyan,arv7506pw11)
-	ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio"
-	;;
 arcadyan,arv7519rw22)
 	ucidef_set_led_netdev "lan" "lan" "arv7519rw22:green:lan" "eth0.1"
 	;;
-arcadyan,arv752dpw22)
-	ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio"
-	;;
-bt,homehub-v5a)
-	ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
-	;;
-netgear,dm200)
-	ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0"
-	;;
-avm,fritz3370-rev2-hynix|\
-avm,fritz3370-rev2-micron)
-	ucidef_set_led_switch "lan" "LAN" "fritz3370:green:lan" "switch0" "0x17"
-	;;
-zyxel,p-2812hnu-f1|\
-zyxel,p-2812hnu-f3)
-	ucidef_set_led_wlan "wifi" "wifi" "p2812hnufx:green:wlan" "phy0radio"
-	;;
 arcadyan,vgv7510kw22-nor|\
 arcadyan,vgv7510kw22-brn)
 	ucidef_set_led_wlan "wifi" "wifi" "vgv7510kw22:green:wlan" "phy0radio"
@@ -69,6 +42,13 @@ arcadyan,vgv7519-nor|\
 arcadyan,vgv7519-brn)
 	ucidef_set_led_wlan "wifi" "wifi" "vgv7519:green:wireless" "phy0radio"
 	;;
+avm,fritz3370-rev2-hynix|\
+avm,fritz3370-rev2-micron)
+	ucidef_set_led_switch "lan" "LAN" "fritz3370:green:lan" "switch0" "0x17"
+	;;
+bt,homehub-v5a)
+	ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
+	;;
 buffalo,wbmr-300hpd)
 	ucidef_set_led_switch "lan1" "LAN1" "wbmr300:green:lan1" "switch0" "0x08"
 	ucidef_set_led_switch "lan2" "LAN2" "wbmr300:green:lan2" "switch0" "0x04"
@@ -76,7 +56,12 @@ buffalo,wbmr-300hpd)
 	ucidef_set_led_switch "lan3" "LAN3" "wbmr300:green:lan3" "switch0" "0x20"
 	ucidef_set_led_default "router" "router" "wbmr300:green:router" "1"
 	;;
-*)
+netgear,dm200)
+	ucidef_set_led_netdev "lan" "lan" "dm200:green:lan" "eth0"
+	;;
+zyxel,p-2812hnu-f1|\
+zyxel,p-2812hnu-f3)
+	ucidef_set_led_wlan "wifi" "wifi" "p2812hnufx:green:wlan" "phy0radio"
 	;;
 esac
 
diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network
similarity index 54%
rename from target/linux/lantiq/base-files/etc/board.d/02_network
rename to target/linux/lantiq/xrx200/base-files/etc/board.d/02_network
index d79a30d22d..f56de32614 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/xrx200/base-files/etc/board.d/02_network
@@ -9,132 +9,44 @@
 
 board_config_update
 
-vpi=1
-vci=32
 annex="a"
-tone="av"
-xfer_mode=""
-encaps="llc"
-payload="bridged"
+
 lan_mac=""
 wan_mac=""
-interface_wan="dsl0"
 
 board=$(board_name)
 
 case "$board" in
-audiocodes,mp-252)
-	ucidef_add_switch "switch0" \
-		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
-	;;
-
-allnet,all0333cj)
-	annex="b"
-	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_set_interface_lan 'eth0'
-	;;
-
-arcadyan,arv4510pw)
-	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_add_switch "switch0" \
-		"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
-	;;
-
-arcadyan,arv4519pw|arcadyan,arv7510pw22|arcadyan,arv7518pw)
-	ucidef_add_switch "switch0" \
-		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
-	;;
-
-arcadyan,arv4520pw)
-	annex="b"
-	ucidef_add_switch "switch0" \
-		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
-	;;
-
-arcadyan,arv4525pw|arcadyan,arv452cqw|arcadyan,arv7525pw|arcadyan,arv752dpw)
-	annex="b"
-	ucidef_set_interface_lan 'eth0'
-	;;
-
-arcadyan,arv7506pw11)
-	annex="b"
-	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
-	ucidef_add_switch "switch0" \
-		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
-	;;
-
-arcadyan,arv7519pw)
-	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 1)
-	ucidef_add_switch "switch0" \
-		"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
-	;;
-
-arcadyan,arv7519rw22)
-	wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0x16)" 1)
-	ucidef_add_switch "switch0" \
-		"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
-	;;
-
-arcadyan,arv752dpw22|arcadyan,arv8539pw22)
-	annex="b"
-	ucidef_add_switch "switch0" \
-		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
-	;;
-
 alphanetworks,asl56026)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(mtd_get_mac_ascii uboot_env wanmac)
 	ucidef_add_switch "switch0"\
 		"2:lan" "3:lan" "6t@eth0"
 	;;
-
-bt,homehub-v2b)
-	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
+arcadyan,arv7519rw22)
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0x16)" 1)
 	ucidef_add_switch "switch0" \
-		"1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
-	;;
-
-bt,homehub-v3a)
-	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_set_interface_lan 'eth0'
+		"0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
 	;;
-
-bt,homehub-v5a)
-	lan_mac=$(mtd_get_mac_binary_ubi caldata 0x110c)
+arcadyan,vg3503j)
+	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
+		"2:lan:2" "4:lan:1" "6t@eth0"
 	;;
-
-netgear,dgn1000b)
+arcadyan,vgv7510kw22-brn|\
+arcadyan,vgv7510kw22-nor)
 	annex="b"
-	ucidef_set_interface_lan 'eth0'
-	;;
-
-netgear,dgn3500|netgear,dgn3500b)
-	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
 	ucidef_add_switch "switch0" \
-		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
-	;;
-
-netgear,dm200)
-	lan_mac=$(mtd_get_mac_binary ART 0x0)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_set_interface_lan 'eth0'
+		"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
 	;;
-
-lantiq,easy80920-nand|lantiq,easy80920-nor)
-	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
+arcadyan,vgv7519-brn|\
+arcadyan,vgv7519-nor)
+	wan_mac=$(mtd_get_mac_binary board_config 0x16)
 	ucidef_add_switch "switch0" \
 		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 	;;
-
 avm,fritz3370-rev2-hynix|\
 avm,fritz3370-rev2-micron)
 	annex="b"
@@ -143,21 +55,12 @@ avm,fritz3370-rev2-micron)
 	ucidef_add_switch "switch0" \
 		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 	;;
-
-avm,fritz7312|\
-avm,fritz7320)
-	annex="b"
-	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1)
-	ucidef_set_interface_lan 'eth0'
-	;;
-
 avm,fritz7360sl)
 	annex="b"
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 	;;
-
 avm,fritz7362sl)
 	annex="b"
 	lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
@@ -165,7 +68,6 @@ avm,fritz7362sl)
 	ucidef_add_switch "switch0" \
 		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
 	;;
-
 avm,fritz7412)
 	tffsdev=$(find_mtd_chardev "nand-tffs")
 	annex="b"
@@ -173,91 +75,64 @@ avm,fritz7412)
 	wan_mac=$(/usr/bin/fritz_tffs_nand -d $tffsdev -n macdsl -o)
 	ucidef_set_interface_lan 'eth0'
 	;;
-
-siemens,gigaset-sx76x)
-	annex="b"
+bt,homehub-v5a)
+	lan_mac=$(mtd_get_mac_binary_ubi caldata 0x110c)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
-		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
+		"0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 	;;
-
-zte,h201l)
-	annex="b"
+buffalo,wbmr-300hpd)
+	lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
+	wan_mac="$lan_mac"
 	ucidef_add_switch "switch0" \
-		"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
+		"5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
 	;;
-
-zyxel,p-2601hn)
+lantiq,easy80920-nand|\
+lantiq,easy80920-nor)
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
-		"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
+		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
 	;;
-
-zyxel,p-2812hnu-f1|zyxel,p-2812hnu-f3)
-	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
+netgear,dm200)
+	lan_mac=$(mtd_get_mac_binary ART 0x0)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_add_switch "switch0" \
-		"0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
+	ucidef_set_interface_lan 'eth0'
 	;;
-
-tplink,tdw8970|tplink,tdw8980)
+tplink,tdw8970|\
+tplink,tdw8980)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 0xf100)" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
 	;;
-
-arcadyan,vg3503j)
-	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
-	wan_mac=$(macaddr_add "$lan_mac" 1)
-	ucidef_add_switch "switch0" \
-		"2:lan:2" "4:lan:1" "6t@eth0"
-	;;
-
-tplink,vr200|tplink,vr200v)
+tplink,vr200|\
+tplink,vr200v)
 	wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 0xf100)" 1)
 	ucidef_add_switch "switch0" \
 		"0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
 	;;
-
-arcadyan,vgv7510kw22-nor|arcadyan,vgv7510kw22-brn)
-	annex="b"
-	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
-	ucidef_add_switch "switch0" \
-		"2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "0:wan:5" "6t@eth0"
-	;;
-
-arcadyan,vgv7519-nor|arcadyan,vgv7519-brn)
-	wan_mac=$(mtd_get_mac_binary board_config 0x16)
-	ucidef_add_switch "switch0" \
-		"0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
-	;;
-
-buffalo,wbmr-hp-g300h)
-	ucidef_add_switch "switch0" \
-		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
-	;;
-
-buffalo,wbmr-300hpd)
-	lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
-	wan_mac="$lan_mac"
+zyxel,p-2812hnu-f1|\
+zyxel,p-2812hnu-f3)
+	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
 	ucidef_add_switch "switch0" \
-		"5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
+		"0:lan" "1:lan" "2:lan" "4:lan" "5:wan" "6t@eth0"
 	;;
-
 *)
 	ucidef_set_interface_lan 'eth0'
 	;;
-
 esac
 
 ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
-	ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload" "dsl"
+	ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
 
 if lantiq_is_vdsl_system; then
-	ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
+	ucidef_add_vdsl_modem "$annex" "av"
 else
 	ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
 fi
 
-ucidef_set_interface_wan "$interface_wan" "pppoe"
+ucidef_set_interface_wan "dsl0" "pppoe"
 
 [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
 [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
similarity index 87%
rename from target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
rename to target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 0b48b77d41..4202187d4f 100644
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -1,5 +1,4 @@
 #!/bin/sh
-# Based on ar71xx 11-ath10k-caldata and 10-rt2x00-eeprom
 
 [ -e /lib/firmware/$FIRMWARE ] && exit 0
 
diff --git a/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
new file mode 100644
index 0000000000..6fee72ea8d
--- /dev/null
+++ b/target/linux/lantiq/xrx200/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
@@ -0,0 +1,38 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+case "$FIRMWARE" in
+	"ath9k-eeprom-pci-0000:00:0e.0.bin" | \
+	"ath9k-eeprom-pci-0000:01:00.0.bin" | \
+	"ath9k-eeprom-pci-0000:02:00.0.bin")
+		board=$(board_name)
+
+		case "$board" in
+			avm,fritz3370-rev2-hynix|\
+			avm,fritz3370-rev2-micron|\
+			avm,fritz7362sl)
+				caldata_extract_reverse "urlader" 0x1541 0x440
+				;;
+			avm,fritz7360sl)
+				caldata_extract "urlader" 0x985 0x1000
+				;;
+			avm,fritz7412)
+				/usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader")
+				;;
+			bt,homehub-v5a)
+				caldata_extract_ubi "caldata" 0x1000 0x1000
+				ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 0x10c
+				;;
+			tplink,tdw8970|\
+			tplink,tdw8980)
+				caldata_extract "boardconfig" 0x21000 0x1000
+				;;
+			*)
+				caldata_die "board $board is not supported yet"
+				;;
+		esac
+		;;
+esac
diff --git a/target/linux/lantiq/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh
similarity index 91%
rename from target/linux/lantiq/base-files/lib/upgrade/platform.sh
rename to target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh
index c47ff78fb2..dcd797c30d 100755
--- a/target/linux/lantiq/base-files/lib/upgrade/platform.sh
+++ b/target/linux/lantiq/xrx200/base-files/lib/upgrade/platform.sh
@@ -13,8 +13,6 @@ platform_do_upgrade() {
 	avm,fritz3370-rev2-micron|\
 	avm,fritz7362sl|\
 	avm,fritz7412|\
-	bt,homehub-v2b|\
-	bt,homehub-v3a|\
 	bt,homehub-v5a|\
 	zyxel,p-2812hnu-f1|\
 	zyxel,p-2812hnu-f3)
diff --git a/target/linux/lantiq/xway/base-files/etc/board.d/01_leds b/target/linux/lantiq/xway/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..82a39f4648
--- /dev/null
+++ b/target/linux/lantiq/xway/base-files/etc/board.d/01_leds
@@ -0,0 +1,44 @@
+#!/bin/sh
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+led_wifi="$(get_dt_led wifi)"
+[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
+
+led_usb="$(get_dt_led usb)"
+[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1"
+
+led_usb2="$(get_dt_led usb2)"
+[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1"
+
+led_dsl="$(get_dt_led dsl)"
+[ -n "$led_dsl" ] && {
+	led_internet="$(get_dt_led internet)"
+	if [ -n "$led_internet" ]; then
+		ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
+		ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
+	else
+		ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
+	fi
+}
+
+board=$(board_name)
+
+case "$board" in
+arcadyan,arv7506pw11)
+	ucidef_set_led_wlan "wifi" "wifi" "arv7506pw11:green:wlan" "phy0radio"
+	;;
+arcadyan,arv752dpw22)
+	ucidef_set_led_wlan "wifi" "wifi" "arv752dpw22:red:wifi" "phy0radio"
+	;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/lantiq/xway/base-files/etc/board.d/02_network b/target/linux/lantiq/xway/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..b1b742bd1f
--- /dev/null
+++ b/target/linux/lantiq/xway/base-files/etc/board.d/02_network
@@ -0,0 +1,122 @@
+#!/bin/sh
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+. /lib/functions/lantiq.sh
+
+board_config_update
+
+annex="a"
+
+lan_mac=""
+wan_mac=""
+
+board=$(board_name)
+
+case "$board" in
+arcadyan,arv4510pw)
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
+	;;
+arcadyan,arv4519pw|\
+arcadyan,arv7510pw22|\
+arcadyan,arv7518pw)
+	ucidef_add_switch "switch0" \
+		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
+	;;
+arcadyan,arv7506pw11)
+	annex="b"
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 2)
+	ucidef_add_switch "switch0" \
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
+	;;
+arcadyan,arv7519pw)
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 0x16)" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
+	;;
+arcadyan,arv7525pw|\
+arcadyan,arv752dpw)
+	annex="b"
+	ucidef_set_interface_lan 'eth0'
+	;;
+arcadyan,arv752dpw22|\
+arcadyan,arv8539pw22)
+	annex="b"
+	ucidef_add_switch "switch0" \
+		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
+	;;
+audiocodes,mp-252)
+	ucidef_add_switch "switch0" \
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
+	;;
+avm,fritz7312|\
+avm,fritz7320)
+	annex="b"
+	wan_mac=$(macaddr_add "$(mtd_get_mac_binary urlader 0xa91)" 1)
+	ucidef_set_interface_lan 'eth0'
+	;;
+bt,homehub-v2b)
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_add_switch "switch0" \
+		"1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
+	;;
+bt,homehub-v3a)
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_set_interface_lan 'eth0'
+	;;
+buffalo,wbmr-hp-g300h)
+	ucidef_add_switch "switch0" \
+		"0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
+	;;
+netgear,dgn3500|\
+netgear,dgn3500b)
+	lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_add_switch "switch0" \
+		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
+	;;
+siemens,gigaset-sx76x)
+	annex="b"
+	ucidef_add_switch "switch0" \
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
+	;;
+zte,h201l)
+	annex="b"
+	ucidef_add_switch "switch0" \
+		"0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
+	;;
+zyxel,p-2601hn)
+	ucidef_add_switch "switch0" \
+		"0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
+	;;
+*)
+	ucidef_set_interface_lan 'eth0'
+	;;
+esac
+
+ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
+	ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
+
+if lantiq_is_vdsl_system; then
+	ucidef_add_vdsl_modem "$annex" "av"
+else
+	ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
+fi
+
+ucidef_set_interface_wan "dsl0" "pppoe"
+
+[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
+[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
+
+board_config_flush
+
+exit 0
+
diff --git a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom b/target/linux/lantiq/xway/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
similarity index 70%
rename from target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
rename to target/linux/lantiq/xway/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
index 5a6e8d360b..1f12da8553 100644
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
+++ b/target/linux/lantiq/xway/base-files/etc/hotplug.d/firmware/12-ath9k-eeprom
@@ -41,28 +41,13 @@ case "$FIRMWARE" in
 				caldata_extract_swap "art-copy" 0x0 0x1000
 				ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot_env ethaddr) +2) 0x10c
 				;;
-			bt,homehub-v5a)
-				caldata_extract_ubi "caldata" 0x1000 0x1000
-				ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary_ubi caldata 0x110c) +2) 0x10c
-				;;
 			netgear,dgn3500|netgear,dgn3500b)
 				caldata_extract "calibration" 0xf000 0x1000
 				ath9k_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii uboot-env ethaddr) +2) 0x20c
 				;;
-			avm,fritz3370-rev2-hynix|\
-			avm,fritz3370-rev2-micron|\
-			avm,fritz7362sl)
-				caldata_extract_reverse "urlader" 0x1541 0x440
-				;;
-			avm,fritz7312|avm,fritz7320|avm,fritz7360sl)
+			avm,fritz7312|avm,fritz7320)
 				caldata_extract "urlader" 0x985 0x1000
 				;;
-			avm,fritz7412)
-				/usr/bin/fritz_cal_extract -i 1 -s 0x1e000 -e 0x207 -l 4096 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader")
-				;;
-			tplink,tdw8970|tplink,tdw8980)
-				caldata_extract "boardconfig" 0x21000 0x1000
-				;;
 			*)
 				caldata_die "board $board is not supported yet"
 				;;
diff --git a/target/linux/lantiq/xway/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/xway/base-files/lib/upgrade/platform.sh
new file mode 100755
index 0000000000..5ef0a0ddb9
--- /dev/null
+++ b/target/linux/lantiq/xway/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,20 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+	return 0
+}
+
+platform_do_upgrade() {
+	local board=$(board_name)
+
+	case "$board" in
+	bt,homehub-v2b|\
+	bt,homehub-v3a)
+		nand_do_upgrade $1
+		;;
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}
diff --git a/target/linux/lantiq/xway_legacy/base-files/etc/board.d/01_leds b/target/linux/lantiq/xway_legacy/base-files/etc/board.d/01_leds
new file mode 100755
index 0000000000..4200dcb0c8
--- /dev/null
+++ b/target/linux/lantiq/xway_legacy/base-files/etc/board.d/01_leds
@@ -0,0 +1,41 @@
+#!/bin/sh
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+led_wifi="$(get_dt_led wifi)"
+[ -n "$led_wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "$led_wifi" "phy0tpt"
+
+led_usb="$(get_dt_led usb)"
+[ -n "$led_usb" ] && ucidef_set_led_usbdev "usb" "usb" "$led_usb" "1-1"
+
+led_usb2="$(get_dt_led usb2)"
+[ -n "$led_usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "$led_usb2" "2-1"
+
+led_dsl="$(get_dt_led dsl)"
+[ -n "$led_dsl" ] && {
+	led_internet="$(get_dt_led internet)"
+	if [ -n "$led_internet" ]; then
+		ucidef_set_led_default "dsl" "dsl" "$led_dsl" "0"
+		ucidef_set_led_netdev "internet" "internet" "$led_internet" "pppoe-wan"
+	else
+		ucidef_set_led_netdev "dsl" "dsl" "$led_dsl" "dsl0"
+	fi
+}
+
+board=$(board_name)
+
+case "$board" in
+arcadyan,arv4525pw)
+	ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
+	;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/lantiq/xway_legacy/base-files/etc/board.d/02_network b/target/linux/lantiq/xway_legacy/base-files/etc/board.d/02_network
new file mode 100755
index 0000000000..120857de4c
--- /dev/null
+++ b/target/linux/lantiq/xway_legacy/base-files/etc/board.d/02_network
@@ -0,0 +1,52 @@
+#!/bin/sh
+#
+# Copyright (C) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+. /lib/functions/lantiq.sh
+
+board_config_update
+
+annex="a"
+
+lan_mac=""
+wan_mac=""
+
+board=$(board_name)
+
+case "$board" in
+arcadyan,arv4520pw)
+	annex="b"
+	ucidef_add_switch "switch0" \
+		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
+	;;
+arcadyan,arv4525pw|\
+arcadyan,arv452cqw)
+	annex="b"
+	ucidef_set_interface_lan 'eth0'
+	;;
+*)
+	ucidef_set_interface_lan 'eth0'
+	;;
+esac
+
+ls /lib/modules/$(uname -r)/ltq_atm* 1> /dev/null 2>&1 && \
+	ucidef_add_atm_bridge 1 32 "llc" "bridged" "dsl"
+
+if lantiq_is_vdsl_system; then
+	ucidef_add_vdsl_modem "$annex" "av"
+else
+	ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
+fi
+
+ucidef_set_interface_wan "dsl0" "pppoe"
+
+[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
+[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
+
+board_config_flush
+
+exit 0
+
diff --git a/target/linux/lantiq/xway_legacy/base-files/lib/upgrade/platform.sh b/target/linux/lantiq/xway_legacy/base-files/lib/upgrade/platform.sh
new file mode 100755
index 0000000000..d088601bb0
--- /dev/null
+++ b/target/linux/lantiq/xway_legacy/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,10 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+platform_check_image() {
+	return 0
+}
+
+platform_do_upgrade() {
+	default_do_upgrade "$1"
+}