mvebu: add support for GL.iNet GL-MV1000
This patch adds supports for GL-MV1000. Specification: - SOC: Marvell Armada 88F3720 (1GHz) - Flash: 16MB (W25Q128FWSIG) - RAM: 1GB DDR4 - Ethernet: 3x GE (1 WAN + 2 LAN) - EMMC: 8GB EMMC (KLM8G1GETF-B041) - MicroSD: 1x microSD slot - USB: 1x USB 2.0 port(TypeA),1x USB 3.0 port(TypeC) - Button: 1x reset button,1x slide switch - LED: 3x greed LED - UART: 1x UART on PCB (JP1: 3.3V, RX, TX, GND) Update firmware instructions ============================ In the compiled,please gzip -d xxx.img.gz,then update firmware on uboot web. Signed-off-by: Li Zhang <li.zhang@gl-inet.com> [Copied dts file to files-5.4] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>master
parent
cf22c4435e
commit
050c24f05c
@ -0,0 +1,165 @@
|
|||||||
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||||
|
/*
|
||||||
|
* Device Tree file for GL.iNet GL-MV1000
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include "armada-372x.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "GL.inet GL-MV1000";
|
||||||
|
compatible = "glinet,gl-mv1000", "marvell,armada3720";
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
stdout-path = "serial0:115200n8";
|
||||||
|
};
|
||||||
|
|
||||||
|
memory@0 {
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
vcc_sd_reg1: regulator {
|
||||||
|
compatible = "regulator-gpio";
|
||||||
|
regulator-name = "vcc_sd1";
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
regulator-boot-on;
|
||||||
|
|
||||||
|
gpios-states = <0>;
|
||||||
|
states = <1800000 0x1
|
||||||
|
3300000 0x0>;
|
||||||
|
enable-active-high;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&spi0 {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
flash@0 {
|
||||||
|
reg = <0>;
|
||||||
|
compatible = "jedec,spi-nor";
|
||||||
|
spi-max-frequency = <104000000>;
|
||||||
|
m25p,fast-read;
|
||||||
|
partitions {
|
||||||
|
compatible = "fixed-partitions";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
partition@0 {
|
||||||
|
label = "u-boot";
|
||||||
|
reg = <0 0xf0000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@f0000 {
|
||||||
|
label = "u-boot-env";
|
||||||
|
reg = <0Xf0000 0x8000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
factory: partition@f8000 {
|
||||||
|
label = "factory";
|
||||||
|
reg = <0xf8000 0x8000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&sdhci1 {
|
||||||
|
wp-inverted;
|
||||||
|
bus-width = <4>;
|
||||||
|
cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
|
||||||
|
marvell,pad-type = "sd";
|
||||||
|
no-1-8-v;
|
||||||
|
vqmmc-supply = <&vcc_sd_reg1>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&sdhci0 {
|
||||||
|
bus-width = <8>;
|
||||||
|
mmc-ddr-1_8v;
|
||||||
|
mmc-hs400-1_8v;
|
||||||
|
non-removable;
|
||||||
|
no-sd;
|
||||||
|
no-sdio;
|
||||||
|
marvell,pad-type = "fixed-1-8v";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usb3 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usb2 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart0 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&mdio {
|
||||||
|
switch0: switch0@1 {
|
||||||
|
compatible = "marvell,mv88e6085";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
reg = <1>;
|
||||||
|
|
||||||
|
dsa,member = <0 0>;
|
||||||
|
|
||||||
|
ports: ports {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
port@0 {
|
||||||
|
reg = <0>;
|
||||||
|
label = "cpu";
|
||||||
|
ethernet = <ð0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
port@1 {
|
||||||
|
reg = <1>;
|
||||||
|
label = "wan";
|
||||||
|
phy-handle = <&switch0phy0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
port@2 {
|
||||||
|
reg = <2>;
|
||||||
|
label = "lan0";
|
||||||
|
phy-handle = <&switch0phy1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
port@3 {
|
||||||
|
reg = <3>;
|
||||||
|
label = "lan1";
|
||||||
|
phy-handle = <&switch0phy2>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
mdio {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
switch0phy0: switch0phy0@11 {
|
||||||
|
reg = <0x11>;
|
||||||
|
};
|
||||||
|
switch0phy1: switch0phy1@12 {
|
||||||
|
reg = <0x12>;
|
||||||
|
};
|
||||||
|
switch0phy2: switch0phy2@13 {
|
||||||
|
reg = <0x13>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
ð0 {
|
||||||
|
mtd-mac-address = <&factory 0x0>;
|
||||||
|
phy-mode = "rgmii-id";
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
fixed-link {
|
||||||
|
speed = <1000>;
|
||||||
|
full-duplex;
|
||||||
|
};
|
||||||
|
};
|
@ -0,0 +1,165 @@
|
|||||||
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||||
|
/*
|
||||||
|
* Device Tree file for GL.iNet GL-MV1000
|
||||||
|
*/
|
||||||
|
|
||||||
|
/dts-v1/;
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include "armada-372x.dtsi"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "GL.inet GL-MV1000";
|
||||||
|
compatible = "glinet,gl-mv1000", "marvell,armada3720";
|
||||||
|
|
||||||
|
chosen {
|
||||||
|
stdout-path = "serial0:115200n8";
|
||||||
|
};
|
||||||
|
|
||||||
|
memory@0 {
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
vcc_sd_reg1: regulator {
|
||||||
|
compatible = "regulator-gpio";
|
||||||
|
regulator-name = "vcc_sd1";
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
regulator-boot-on;
|
||||||
|
|
||||||
|
gpios-states = <0>;
|
||||||
|
states = <1800000 0x1
|
||||||
|
3300000 0x0>;
|
||||||
|
enable-active-high;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&spi0 {
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
flash@0 {
|
||||||
|
reg = <0>;
|
||||||
|
compatible = "jedec,spi-nor";
|
||||||
|
spi-max-frequency = <104000000>;
|
||||||
|
m25p,fast-read;
|
||||||
|
partitions {
|
||||||
|
compatible = "fixed-partitions";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <1>;
|
||||||
|
|
||||||
|
partition@0 {
|
||||||
|
label = "u-boot";
|
||||||
|
reg = <0 0xf0000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
partition@f0000 {
|
||||||
|
label = "u-boot-env";
|
||||||
|
reg = <0Xf0000 0x8000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
factory: partition@f8000 {
|
||||||
|
label = "factory";
|
||||||
|
reg = <0xf8000 0x8000>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&sdhci1 {
|
||||||
|
wp-inverted;
|
||||||
|
bus-width = <4>;
|
||||||
|
cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
|
||||||
|
marvell,pad-type = "sd";
|
||||||
|
no-1-8-v;
|
||||||
|
vqmmc-supply = <&vcc_sd_reg1>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&sdhci0 {
|
||||||
|
bus-width = <8>;
|
||||||
|
mmc-ddr-1_8v;
|
||||||
|
mmc-hs400-1_8v;
|
||||||
|
non-removable;
|
||||||
|
no-sd;
|
||||||
|
no-sdio;
|
||||||
|
marvell,pad-type = "fixed-1-8v";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usb3 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usb2 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart0 {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&mdio {
|
||||||
|
switch0: switch0@1 {
|
||||||
|
compatible = "marvell,mv88e6085";
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
reg = <1>;
|
||||||
|
|
||||||
|
dsa,member = <0 0>;
|
||||||
|
|
||||||
|
ports: ports {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
port@0 {
|
||||||
|
reg = <0>;
|
||||||
|
label = "cpu";
|
||||||
|
ethernet = <ð0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
port@1 {
|
||||||
|
reg = <1>;
|
||||||
|
label = "wan";
|
||||||
|
phy-handle = <&switch0phy0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
port@2 {
|
||||||
|
reg = <2>;
|
||||||
|
label = "lan0";
|
||||||
|
phy-handle = <&switch0phy1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
port@3 {
|
||||||
|
reg = <3>;
|
||||||
|
label = "lan1";
|
||||||
|
phy-handle = <&switch0phy2>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
mdio {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
switch0phy0: switch0phy0@11 {
|
||||||
|
reg = <0x11>;
|
||||||
|
};
|
||||||
|
switch0phy1: switch0phy1@12 {
|
||||||
|
reg = <0x12>;
|
||||||
|
};
|
||||||
|
switch0phy2: switch0phy2@13 {
|
||||||
|
reg = <0x13>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
ð0 {
|
||||||
|
mtd-mac-address = <&factory 0x0>;
|
||||||
|
phy-mode = "rgmii-id";
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
fixed-link {
|
||||||
|
speed = <1000>;
|
||||||
|
full-duplex;
|
||||||
|
};
|
||||||
|
};
|
Loading…
Reference in New Issue