openwrt/target/linux/ramips/mt7620/target.mk

#
# Copyright (C) 2009 OpenWrt.org
#

SUBTARGET:=mt7620
BOARDNAME:=MT7620 based boards
FEATURES+=usb ramdisk
CPU_TYPE:=24kc

DEFAULT_PACKAGES += kmod-rt2800-soc wpad-basic swconfig

define Target/Description
	Build firmware images for Ralink MT7620 based boards.
endef
ralink: update patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37016 11 years ago			`#`
			`# Copyright (C) 2009 OpenWrt.org`
			`#`

ralink: merge the mt7620a/n subtargets Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43300 10 years ago			`SUBTARGET:=mt7620`
			`BOARDNAME:=MT7620 based boards`
ramips: Add support for Head Weblink HDRM200 Head Weblink HDRM200 is a dual-sim router based on MT7620A. The detailed specifications are: - MT7620A (580MHz) - 64MB RAM - 16MB of flash (SPI NOR) - 6x 10/100Mbps Ethernet (MT7620A built-in switch) - 1x microSD slot - 1x miniPCIe slot (only USB2.0 bus). Device is shipped with a SIMCOM SIM7100E LTE modem. - 2x SIM slots (standard size) - 1x USB2.0 port - 1x 2.4GHz wifi (rt2800) - 1x 5GHz wifi (mt7612) - 1x reset button - 1x WPS button - 3x GPIO-controllable LEDs - 1x 10 pin terminal block (RS232, RS485, 4 x GPIO) Tested: - Ethernet switch - Wifi - USB slot - SD card slot - miniPCIe-slot - sysupgrade - reset button Installation instructions: Installing OpenWRT for the first time requires a bit of work, as the board does not ship with OpenWRT. In addition, the bootloader automatically reboots when installing an image over tftp. In order to install OpenWRT on the HDRM200, you need to do the following: * Copy the initramfs-image to your tftp-root (default filename is test.bin) and configure networking accordingly (default server IP is 10.10.10.3, client 10.10.10.123). Start your tftp server. * Open the board and connect to UART. The pins are exposed and clearly marked. * Boot the board and press 1. * Either use the default filename and client/server IP-addresses, or specify your own. The image should now be loaded to memory and board boot. If the router reboots while the image is loading, you need to try again. Once the board has booted, copy the sysupgrade-image to the router and run sysupgrade in order to install OpenWRT to the flash. Notes: - You control which SIM slot to use by writing 0/1 to /sys/class/gpio/gpio0/value. In order for the change to take effect, you can either use AT-commands (AT+CFUN) or power-cycle the modem (write 0/1 to /sys/class/gpio/gpio21/value). - RS485 is available on /dev/ttyS0. - RS232 is available on /dev/ttyS1. - The name of the ioX-gpios map to the labels on the casing. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> [fixed whitespace issue and merge conflict in target.mk] Signed-off-by: Petr Štetiar <ynezz@true.cz> 5 years ago			`FEATURES+=usb ramdisk`
ramips: switch from 24kec to 24kc Since the only difference between 24Kec and 24Kc is the addition of DSP ASE support, and we don't use it anymore, there is no need to keep 24Kec as a separate cpu type. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> 8 years ago			`CPU_TYPE:=24kc`
ralink: update patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37016 11 years ago
ramips: move swconfig to subtargets except for MT7621 As MT7621 does not use swconfig anymore, move the package swconfig to other subtargets. Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn> 4 years ago			`DEFAULT_PACKAGES += kmod-rt2800-soc wpad-basic swconfig`
ramips: fix rt2x00 handling of default packages for subtargets Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 41145 10 years ago
ralink: update patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37016 11 years ago			`define Target/Description`
ralink: merge the mt7620a/n subtargets Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 43300 10 years ago			`Build firmware images for Ralink MT7620 based boards.`
ralink: update patches Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37016 11 years ago			`endef`