dumalogiya
/
openwrt
2
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
You cannot select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
v19.07.3_mercusys_ac12_duma
master
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from 'fdfb2210e6'
${ noResults }
openwrt/obsolete-buildroot/make/gcc-uclibc-3.3.mk

268 lines
9.5 KiB
Makefile
Raw Blame History

# Makefile for to build a gcc/uClibc toolchain
#
# Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org>
# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
ifneq ($(GCC_2_95_TOOLCHAIN),true)
# Shiny new stuff...
GCC_VERSION:=3.3.3
GCC_SITE:=ftp://ftp.gnu.org/gnu/gcc/releases/gcc-$(GCC_VERSION)
#GCC_SITE:=http://www.binarycode.org/gcc/releases/gcc-$(GCC_VERSION)
#GCC_SITE:=http://gcc.get-software.com/releases/gcc-$(GCC_VERSION)
#
# snapshots....
#GCC_VERSION:=3.3-20031013
#GCC_SITE:=http://gcc.get-software.com/snapshots/$(GCC_VERSION)
#
GCC_SOURCE:=gcc-$(GCC_VERSION).tar.bz2
GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION)
GCC_CAT:=bzcat
GCC_STRIP_HOST_BINARIES:=true
#############################################################
#
# Setup some initial stuff
#
#############################################################
ifeq ($(INSTALL_LIBGCJ),true)
TARGET_LANGUAGES:=c,c++,java
else
ifeq ($(INSTALL_LIBSTDCPP),true)
TARGET_LANGUAGES:=c,c++
else
TARGET_LANGUAGES:=c
endif
endif
#############################################################
#
# build the first pass gcc compiler
#
#############################################################
GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc-3.3-initial
$(DL_DIR)/$(GCC_SOURCE):
$(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
$(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
$(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
touch $(GCC_DIR)/.unpacked
$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
# Apply any files named gcc-*.patch from the source directory to gcc
$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc3.3-mega.patch.bz2
$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc-uclibc-3.3*.patch
ifeq ($(SOFT_FLOAT),true)
ifeq ("$(strip $(ARCH))","i386")
$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) i386-gcc-soft-float.patch
endif
endif
touch $(GCC_DIR)/.patched
# The --without-headers option stopped working with gcc 3.0 and has never been
# # fixed, so we need to actually have working C library header files prior to
# # the step or libgcc will not build...
$(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched
mkdir -p $(GCC_BUILD_DIR1)
-mkdir -p $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include
(cd $(GCC_BUILD_DIR1); PATH=$(TARGET_PATH) \
$(GCC_DIR)/configure \
--prefix=$(STAGING_DIR) \
--build=$(GNU_HOST_NAME) \
--host=$(GNU_HOST_NAME) \
--target=$(REAL_GNU_TARGET_NAME) \
--enable-languages=c \
--disable-shared \
--includedir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include \
--with-sysroot=$(TOOL_BUILD_DIR)/uClibc_dev/ \
--disable-__cxa_atexit \
--enable-target-optspace \
--with-gnu-ld \
$(DISABLE_NLS) \
$(MULTILIB) \
$(SOFT_FLOAT_CONFIG_OPTION) \
$(EXTRA_GCC_CONFIG_OPTIONS));
touch $(GCC_BUILD_DIR1)/.configured
$(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) all-gcc
touch $(GCC_BUILD_DIR1)/.compiled
$(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc: $(GCC_BUILD_DIR1)/.compiled
PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) install-gcc
#rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov
#rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc $(STAGING_DIR)/share/locale
gcc3_3_initial: uclibc-configured binutils $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc
gcc3_3_initial-clean:
rm -rf $(GCC_BUILD_DIR1)
rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
gcc3_3_initial-dirclean:
rm -rf $(GCC_BUILD_DIR1)
#############################################################
#
# second pass compiler build. Build the compiler targeting
# the newly built shared uClibc library.
#
#############################################################
GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc-3.3-final
$(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.patched $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libc.a
mkdir -p $(GCC_BUILD_DIR2)
# Important! Required for limits.h to be fixed.
ln -sf include $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/sys-include
(cd $(GCC_BUILD_DIR2); PATH=$(TARGET_PATH) \
$(GCC_DIR)/configure \
--prefix=$(STAGING_DIR) \
--build=$(GNU_HOST_NAME) \
--host=$(GNU_HOST_NAME) \
--target=$(REAL_GNU_TARGET_NAME) \
--enable-languages=$(TARGET_LANGUAGES) \
--enable-shared \
--with-gxx-include-dir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include/c++ \
--disable-__cxa_atexit \
--enable-target-optspace \
--with-gnu-ld \
$(DISABLE_NLS) \
$(MULTILIB) \
$(SOFT_FLOAT_CONFIG_OPTION) \
$(GCC_USE_SJLJ_EXCEPTIONS) \
$(EXTRA_GCC_CONFIG_OPTIONS));
touch $(GCC_BUILD_DIR2)/.configured
$(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) all
touch $(GCC_BUILD_DIR2)/.compiled
$(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled
PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) install
# Strip the host binaries
ifeq ($(GCC_STRIP_HOST_BINARIES),true)
-strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
endif
# Set up the symlinks to enable lying about target name.
set -e; \
(cd $(STAGING_DIR); \
ln -sf $(REAL_GNU_TARGET_NAME) $(GNU_TARGET_NAME); \
cd bin; \
for app in $(REAL_GNU_TARGET_NAME)-* ; do \
ln -sf $${app} \
$(GNU_TARGET_NAME)$${app##$(REAL_GNU_TARGET_NAME)}; \
done; \
);
ifeq ($(SOFT_FLOAT),true)
# Replace specs file with one that defaults to soft float mode.
if [ ! -f $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs ] ; then \
echo staging dir specs file is missing ; \
/bin/false ; \
fi;
cp $(SOURCE_DIR)/specs-$(ARCH)-soft-float $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
endif
touch $(GCC_BUILD_DIR2)/.installed
gcc3_3: uclibc-configured binutils gcc3_3_initial $(LIBFLOAT_TARGET) uclibc \
$(GCC_BUILD_DIR2)/.installed $(GCC_TARGETS)
gcc3_3-source: $(DL_DIR)/$(GCC_SOURCE)
gcc3_3-clean:
rm -rf $(GCC_BUILD_DIR2)
rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
gcc3_3-dirclean:
rm -rf $(GCC_BUILD_DIR2)
#############################################################
#
# Next build target gcc compiler
#
#############################################################
GCC_BUILD_DIR3:=$(BUILD_DIR)/gcc-3.3-target
$(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR2)/.installed
mkdir -p $(GCC_BUILD_DIR3)
(cd $(GCC_BUILD_DIR3); PATH=$(TARGET_PATH) \
$(GCC_DIR)/configure \
--prefix=/usr \
--build=$(GNU_HOST_NAME) \
--host=$(REAL_GNU_TARGET_NAME) \
--target=$(REAL_GNU_TARGET_NAME) \
--enable-languages=$(TARGET_LANGUAGES) \
--enable-shared \
--with-gxx-include-dir=/usr/include/c++ \
--disable-__cxa_atexit \
--enable-target-optspace \
--with-gnu-ld \
$(DISABLE_NLS) \
$(MULTILIB) \
$(SOFT_FLOAT_CONFIG_OPTION) \
$(GCC_USE_SJLJ_EXCEPTIONS) \
$(EXTRA_GCC_CONFIG_OPTIONS));
touch $(GCC_BUILD_DIR3)/.configured
$(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured
PATH=$(TARGET_PATH) \
$(MAKE) $(JLEVEL) $(TARGET_GCC_ARGS) -C $(GCC_BUILD_DIR3) all
touch $(GCC_BUILD_DIR3)/.compiled
$(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled
PATH=$(TARGET_PATH) \
$(MAKE) $(JLEVEL) DESTDIR=$(TARGET_DIR) -C $(GCC_BUILD_DIR3) install
ifeq ($(SOFT_FLOAT),true)
# Replace specs file with one that defaults to soft float mode.
if [ ! -f $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs ] ; then \
echo target dir specs file is missing ; \
/bin/false ; \
fi;
cp $(SOURCE_DIR)/specs-$(ARCH)-soft-float $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
# Make sure gcc does not think we are cross compiling
$(SED) "s/^1/0/;" $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
else
# Remove broken specs file (cross compile flag is set).
rm -f $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
endif
-(cd $(TARGET_DIR)/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
-(cd $(TARGET_DIR)/usr/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
-(cd $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION); $(STRIP) cc1 cc1plus collect2 > /dev/null 2>&1)
-(cd $(TARGET_DIR)/usr/lib; $(STRIP) libstdc++.so.*.*.* > /dev/null 2>&1)
-(cd $(TARGET_DIR)/lib; $(STRIP) libgcc_s.so.*.*.* > /dev/null 2>&1)
#
rm -f $(TARGET_DIR)/usr/lib/*.la*
#rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
# $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
# Work around problem of missing syslimits.h
cp -f $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/syslimits.h $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/
# These are in /lib, so...
#rm -rf $(TARGET_DIR)/usr/lib/libgcc_s.so*
#touch -c $(TARGET_DIR)/usr/bin/gcc
gcc3_3_target: uclibc_target binutils_target $(TARGET_DIR)/usr/bin/gcc
gcc3_3_target-clean:
rm -rf $(GCC_BUILD_DIR3)
rm -f $(TARGET_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
gcc3_3_target-dirclean:
rm -rf $(GCC_BUILD_DIR3)
endif
Reference in New Issue View Git Blame Copy Permalink